On Wed, Aug 16, 2017 at 10:29:31AM +0200, Borislav Petkov wrote:
> Anyway, I think I have a box to run it to, lemme go find it.
Seems to boot.
It's a whole another story whether it actually works. :-)
Need some EINJ capabilities urgently but finding a box where it works
reliably is like finding gold.
[ 7.784960] ERST: Failed to get Error Log Address Range.
[ 7.795905] EDAC DEBUG: edac_mc_alloc: allocating 2444 bytes for mci data (16 dimms, 16 csrows/ch
annels)
[ 7.815266] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports.
[ 7.833372] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly.
[ 7.850093] ghes_edac: So, the end result of using this driver varies from vendor to vendor.
[ 7.867322] ghes_edac: If you find incorrect reports, please contact your hardware vendor
[ 7.884034] ghes_edac: to correct its BIOS.
[ 7.892599] ghes_edac: This system has 16 DIMM sockets.
[ 7.903274] EDAC DEBUG: ghes_edac_dmidecode: DIMM8: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 7.920337] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 7.936532] EDAC DEBUG: ghes_edac_dmidecode: DIMM9: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 7.953591] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 7.969778] EDAC DEBUG: ghes_edac_dmidecode: DIMM10: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 7.987010] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.003199] EDAC DEBUG: ghes_edac_dmidecode: DIMM11: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 8.020432] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.036618] EDAC DEBUG: ghes_edac_dmidecode: DIMM12: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 8.053848] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.070038] EDAC DEBUG: ghes_edac_dmidecode: DIMM13: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 8.087268] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.103456] EDAC DEBUG: ghes_edac_dmidecode: DIMM14: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 8.120687] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.128053] tsc: Refined TSC clocksource calibration: 2099.999 MHz
[ 8.128173] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e452fc488e, max_idle_ns: 44
0795307124 ns
[ 8.169800] EDAC DEBUG: ghes_edac_dmidecode: DIMM15: Unbuffered DDR3 RAM size = 2048 MB(ECC)
[ 8.187043] EDAC DEBUG: ghes_edac_dmidecode: type 24, detail 0x80, width 72(total 64)
[ 8.203230] EDAC DEBUG: edac_mc_add_mc_with_groups:
[ 8.213363] EDAC DEBUG: edac_create_sysfs_mci_device: creating bus mc1
[ 8.226643] EDAC DEBUG: edac_create_sysfs_mci_device: creating device mc1
[ 8.240450] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm8, located at memory 8
[ 8.257362] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm8
[ 8.272506] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm9, located at memory 9
[ 8.289409] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm9
[ 8.304556] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm10, located at memory 10
[ 8.321808] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm10
[ 8.337126] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm11, located at memory 11
[ 8.354377] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm11
[ 8.369697] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm12, located at memory 12
[ 8.386946] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm12
[ 8.402266] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm13, located at memory 13
[ 8.419516] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm13
[ 8.434835] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm14, located at memory 14
[ 8.452094] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm14
[ 8.467423] EDAC DEBUG: edac_create_sysfs_mci_device: creating dimm15, located at memory 15
[ 8.484674] EDAC DEBUG: edac_create_dimm_object: creating rank/dimm device dimm15
[ 8.499994] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow8
[ 8.516215] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow9
[ 8.532433] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow10
[ 8.548824] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow11
[ 8.565203] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow12
[ 8.581585] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow13
[ 8.597964] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow14
[ 8.614347] EDAC DEBUG: edac_create_csrow_object: creating (virtual) csrow node csrow15
[ 8.630744] EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
[ 8.650073] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
[ 8.669012] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 8.681940] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
