Hi All, Now that Lee has applied the MFD patch (https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/commit/?h=for-mfd-next&id=6a58f36b0c49c8179804bead579f5ff6304f0245), can someone help clarify the next steps for the GPIO and ACPI / PMIC OpRegion patches of this series? Both these patches depend on the MFD patch (MFD_TPS68470 config option) to compile. Thanks Raj > -----Original Message----- > From: Mani, Rajmohan > Sent: Friday, July 28, 2017 5:30 PM > To: linux-kernel@xxxxxxxxxxxxxxx; linux-gpio@xxxxxxxxxxxxxxx; linux- > acpi@xxxxxxxxxxxxxxx > Cc: Lee Jones <lee.jones@xxxxxxxxxx>; Linus Walleij > <linus.walleij@xxxxxxxxxx>; Alexandre Courbot <gnurou@xxxxxxxxx>; Rafael > J. Wysocki <rjw@xxxxxxxxxxxxx>; Len Brown <lenb@xxxxxxxxxx>; > sakari.ailus@xxxxxxxxxxxxxxx; Andy Shevchenko > <andy.shevchenko@xxxxxxxxx>; Mani, Rajmohan > <rajmohan.mani@xxxxxxxxx> > Subject: [PATCH v6 0/3] TPS68470 PMIC drivers > > This is the patch series for TPS68470 PMIC that works as a camera PMIC. > > The patch series provide the following 3 drivers, to help configure the voltage > regulators, clocks and GPIOs provided by the TPS68470 PMIC, to be able to > use the camera sensors connected to this PMIC. > > TPS68470 MFD driver: > This is the multi function driver that initializes the TPS68470 PMIC and > supports the GPIO and Op Region functions. > > TPS68470 GPIO driver: > This is the PMIC GPIO driver that will be used by the OS GPIO layer, when the > BIOS / firmware triggered GPIO access is done. > > TPS68470 Op Region driver: > This is the driver that will be invoked, when the BIOS / firmware configures > the voltage / clock for the sensors / vcm devices connected to the PMIC. > > --- > > Update on 2 GPIO chips implementation over 1: > - Attempted to implement 2 GPIO chips, but ran into couple of > issues in the kernel, so we couldn't get it to work. > - It was decided to postpone this change, since it is not > critical > > Changes in v6: > - MFD driver: > - Used non-zero return values from regmap_write/read() calls > to detect error conditions > > Changes in v5: > - MFD driver: > - Fixed Kconfig description text > - Addressed other comments from Lee, related to formatting > > - GPIO driver: > - Formatted the file header text > > - Opregion driver: > - Formatted the file header text > > Changes in v4: > - MFD driver: > - Removed board specific code and FIXME comment > - Moved i2c.h include from tps68470.h to tps68470.c > - Moved the TPS68470 REVID read code after PMIC reset > - Fixed typo in debug error message (on failure of > devm_mfd_add_devices() ) > - Enhanced dependency on I2C by changing it to I2C=y > (to fix build errors if I2C is built as module > e.g tps68470.c:71: undefined reference to > `__devm_regmap_init_i2c' > tps68470.c:117: undefined reference to `i2c_register_driver') > - Removed most of the unused header file definitions > - Moved devm_mfd_add_devices() after PMIC resett > - Used probe_new() and removed i2c_device_id table > > The following patch from Andy is needed for the driver to be > probed. > http://marc.info/?l=linux-acpi&m=150030081523885&w=2 > > - GPIO driver: > - Added newline at the end of Kconfig description > - Updated commit message about the descriptive > names for the GPIOs and the typical usage model > of the GPIO driver > > - Opregion driver: > - Added dependency on MFD_TPS68470 > - Converted 2 liner into one line code > > Changes in v3: > - MFD driver: > - Removed GPIO lookup table > - Reverted to probe() for consistency > - Addressed other comments from Andy > > - GPIO driver: > - Removed the code that initializes the default values > of GPIOs to zeros > - Used gpiochip_get_data() to access data inside the gpio_chip > > Changes in v2: > - MFD driver: > - Removed tps68470_* wrappers around regmap_* calls > - Removed "struct tps68470" > - used devm_mfd_add_devices and removed mutex in mfd driver > - Added reasoning about the need of having mfd driver > as bool/builtin > > - Opregion driver: > - renamed opregion driver file / internal symbol names > with tps68470_pmic* > - Made opregion driver tables as const > - Removed unused *handler_context in common handler > - Replaced "int" with "unsigned int" > - Changed to WARN macro to dev_warn() > - Destroyed mutex on error > - Added reasoning about the need of having Opregion driver > as bool/builtin > > - GPIO driver: > - Implemented get_direction() in the GPIO driver > - Setup gpio_chip.names > - Moved the GPIO lookup table code inside mfd driver > - Added reasoning about the need of having GPIO driver > as bool/builtin > > --- > > Rajmohan Mani (3): > mfd: Add new mfd device TPS68470 > gpio: Add support for TPS68470 GPIOs > ACPI / PMIC: Add TI PMIC TPS68470 operation region driver > > drivers/acpi/Kconfig | 16 ++ > drivers/acpi/Makefile | 2 + > drivers/acpi/pmic/tps68470_pmic.c | 455 > ++++++++++++++++++++++++++++++++++++++ > drivers/gpio/Kconfig | 15 ++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-tps68470.c | 176 +++++++++++++++ > drivers/mfd/Kconfig | 18 ++ > drivers/mfd/Makefile | 1 + > drivers/mfd/tps68470.c | 106 +++++++++ > include/linux/mfd/tps68470.h | 97 ++++++++ > 10 files changed, 887 insertions(+) > create mode 100644 drivers/acpi/pmic/tps68470_pmic.c create mode > 100644 drivers/gpio/gpio-tps68470.c create mode 100644 > drivers/mfd/tps68470.c create mode 100644 include/linux/mfd/tps68470.h > > -- > 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
