ACPI IORT is an ACPI addendum to describe the connection topology of devices with IOMMUs and interrupt controllers on ARM64 ACPI systems. Currently the ACPI IORT Kbuild symbol is selected whenever the Kbuild symbol ARM_GIC_V3_ITS is enabled, which in turn is selected by ARM64 Kbuild defaults. This makes the logic behind ACPI_IORT selection a bit twisted and not easy to follow. On ARM64 systems enabling ACPI the kbuild symbol ACPI_IORT should always be selected in that it is a kernel layer provided to the ARM64 arch code to parse and enable ACPI firmware bindings. Make the ACPI_IORT selection explicit in ARM64 Kbuild and remove the selection from ARM_GIC_V3_ITS entry, making the ACPI_IORT selection logic clearer to follow. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Cc: Will Deacon <will.deacon@xxxxxxx> Cc: Hanjun Guo <hanjun.guo@xxxxxxxxxx> Cc: Catalin Marinas <catalin.marinas@xxxxxxx> Cc: Marc Zyngier <marc.zyngier@xxxxxxx> --- arch/arm64/Kconfig | 1 + drivers/irqchip/Kconfig | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b2024db..2424fb4 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -3,6 +3,7 @@ config ARM64 select ACPI_CCA_REQUIRED if ACPI select ACPI_GENERIC_GSI if ACPI select ACPI_GTDT if ACPI + select ACPI_IORT if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ACPI_MCFG if ACPI select ACPI_SPCR_TABLE if ACPI diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 478f8ac..4a57b8f 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -39,7 +39,6 @@ config ARM_GIC_V3_ITS bool depends on PCI depends on PCI_MSI - select ACPI_IORT if ACPI config ARM_NVIC bool -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
