Re: [PATCH v5] gpio: Add driver for ACPI INT0002 Virtual GPIO device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2017-06-01 at 17:23 +0200, Linus Walleij wrote:
> On Wed, May 24, 2017 at 12:42 PM, Hans de Goede <hdegoede@xxxxxxxxxx>
> wrote:
> 
> Please move this thing to drivers/platform/x86.

I'm fine to take it as long it has your Ack.

> > +         Some peripherals on Baytrail and Cherrytrail platforms
> > signal
> > +         PME to the PMC to wakeup the system. When this happens
> > software
> 
> Spell out the acronyms.

PME is standard of PCI, Power Management Event.

PMC — Power Management Controller

PME_B0 — PME Bus 0

STS — status (obviously :-) )

GPE — General Purpose Event (in ACPI terms)

> (...)
> > + * Some peripherals on Bay Trail and Cherry Trail platforms signal
> > PME to the
> > + * PMC to wakeup the system. When this happens software needs to
> > clear the
> > + * PME_B0_STS bit in the GPE0a_STS register to avoid an IRQ storm
> > on IRQ 9.
> 
> Spell out acronyms.


-- 
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux