On Tue, May 30, 2017 at 11:34:17AM +0200, Florian Echtler wrote: > On 26.05.2017 23:03, Lukas Wunner wrote: > > On Fri, May 26, 2017 at 02:13:29PM +0200, Florian Echtler wrote: > >> I'm running Ubuntu 16.04.2 on a 27" unibody iMac 10,1 from 2009. However, even > >> with the most recent HWE stack (kernel 4.8), the display stays black after > >> suspend. I can ssh into the machine, so wakeup is OK, but the display is > >> entirely black (backlight stays off). > >> > > The ATI card has MXM_PNL_PWR_EN and MXM_PNL_BL_EN pins. Those must be > > enabled for the panel to light up. Perhaps radeon needs to be extended > > to do that. One theory is that this is done via ACPI, but perhaps > > only if a certain operating system is running. Dump the ACPI tables > > and search DSDT and SSDT* tables for methods relating to the ATI card > > and/or backlight. If you find checks for OSDW there (e.g. in _PS0, > > i.e. on resume), it means the AML code is only executed on Darwin. > I've already had a look at the ACPI tables; there seem to be no references to > the "official" backlight/display control functions (no _BL? or _DO? methods). > > > Conversely !OSDW means the code is only executed on Windows (Boot Camp). > > Linux masquerades as Darwin, but this can be disabled with > > acpi_osi=!Darwin on the command line. It's worth trying if that changes > > the behaviour. If it does, then macOS likely sets those pins on resume > > and we need to do the same in radeon. > There are OSDW checks present, however, booting with acpi_osi=!Darwin doesn't > make a difference to the backlight behaviour. So, just to confirm, if you never plug in an external DP source and the iMac comes out of sleep, the display stays black? If you log in via ssh and look at dmesg, was radeon able to train the DP link again? No error messages, nothing? Is the panel off or is it on but merely with 0% brightness? There's a block of pins on the GPU for "system management" which contains a bunch of GPIO, OEM and reserved pins. Three of these are used to control the panel when it's switched to the radeon card: pin 23 PNL_PWR_EN pin 25 PNL_BL_EN pin 27 PNL_BL_PWM Basically you'd need to know what these are set to before and after sleep. I don't know how to access them, presumably via a BAR register. A quick look at the RV730-specific registers in drivers/gpu/drm/radeon/*.h did not yield anything useful, but someone at AMD may be able to find this out. Maybe these registers are supposed to be modified by the OS when coming out of sleep, or they're modified by video BIOS but the OS has to trigger this somehow. HTH, Lukas -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
