Hi,
On 09-05-17 09:12, Benjamin Tissoires wrote:
Hi Hans,
On May 07 2017 or thereabouts, Hans de Goede wrote:
ACPI devices which do not have a _PSC method are assumed to have been
put in D0 by the BIOS, but for touchscreens that is not always true,
so call acpi_device_fix_up_power to explicitly put devices without a
_PSC method into D0 state.
This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1
device failing to probe with a "hid_descr_cmd failed" error.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index ea3c3546cef7..c716d9605940 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
return 0;
}
+static void i2c_hid_acpi_fix_up_power(struct device *dev)
+{
+ acpi_handle handle = ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+
+ if (handle && acpi_bus_get_device(handle, &adev) == 0)
+ acpi_device_fix_up_power(adev);
I am wondering if this is not something that should be handled by
acpi-core or i2c-core. Looks like something pretty generic.
The acpi-core deliberately does not do this, as unconditionally
doing this for all devices is known to break things on some
platforms, see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7cd8407
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b9e95fc65eded
So calling this is something which needs to be done an a device-by-device
(usually actually on a driver-by-driver) basis.
I don't expect this to cause any problems for i2c-hid devices
(as the above commits shown once it was done for all ACPI enumerated devices)
and it is necessary for some i2c-hid devices.
Also, isn't this also needed on resume (or reset_resume)?
After a suspend the device is in D3, so we will always execute _PS0
to put it back in D0. This is about devices without a _PSC method
(which allows querying the actual state) being in D3 on boot, rather
then the expected (and assumed) D0. Note that for devices with a _PSC
method calling acpi_device_fix_up_power() is a nop.
Regards,
Hans
+}
+
static const struct acpi_device_id i2c_hid_acpi_match[] = {
{"ACPI0C50", 0 },
{"PNP0C50", 0 },
@@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
{
return -ENODEV;
}
+
+static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
#endif
#ifdef CONFIG_OF
@@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client,
if (ret < 0)
goto err;
+ i2c_hid_acpi_fix_up_power(&client->dev);
+
pm_runtime_get_noresume(&client->dev);
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html