> > This happens on my HP Compaq 8100 Elite SFF PC. While 4.10 works fine, > > 4.11.-rc5 and at least back to 4.10.0-10770-g2d6be4abf514 fail to assign > > PCI IRQ to multiple devices (no GSI messages in the dmesg). This results > > in mouse in one USB port working and keyboard in another USB port not > > working, reproducibly. > > > > Will bisect. > > Thanks a lot for the report, Meelis, and I apologize for the inconvenience. > I opened https://bugzilla.kernel.org/show_bug.cgi?id=195319 to track this, > marked it as a regression, and attached your v4.11-rc5 dmesg to it. Bisecting got stuck - I reached a state with about 5-6 steps left when I got an unbootable kernel. Went there yesterday, restarted a good kernel, skipped the kernel and left. When I rebooted into the next bisect kernel, it has hung again. Will see when I get to go there. Unfortunately I did not remember to take the intermediate bisect state with me :( > > Something seems broken in ACPI. There are a bunch of warnings, and I > think the PCI IRQ problem is a consequence of the fact that the > PNP0A08 _CRS evaluation failed, and we probably don't bother looking > for a _PRT under that bridge. > > > Linux version 4.11.0-rc5-00033-g308ac7563944 (mroos@prometheus) (gcc version 6.3.0 20170321 (Debian 6.3.0-11) ) #64 SMP Wed Apr 5 12:29:53 EEST 2017 > > Command line: BOOT_IMAGE=/boot/vmlinuz-4.11.0-rc5-00033-g308ac7563944 root=/dev/sda1 ro > > ... > > ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20170119/tbfadt-658) > > ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170119/tbfadt-708) > > ... > > acpi LNXCPU:00: Invalid PBLK length [7] > > acpi LNXCPU:01: Invalid PBLK length [7] > > acpi LNXCPU:02: Invalid PBLK length [7] > > acpi LNXCPU:03: Invalid PBLK length [7] > > acpi PNP0A08:00: [Firmware Bug]: no secondary bus range in _CRS > > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > > acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] > > ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20170119/nsarguments-189) > > ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20170119/dsfield-211) > > ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff880113031668), AE_ALREADY_EXISTS (20170119/psparse-543) > > acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM > > acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge > > acpi PNP0A08:00: failed to parse _CRS method, error code -5 > > acpi PNP0A08:00: Bus 0000:00 not present in PCI namespace > > ... > > PCI: Discovered peer bus 00 > > PCI: root bus 00: using default resources > > PCI: Probing PCI hardware (bus 00) > > ... > > ACPI: \: failed to evaluate _DSM (0x1001) > > ... > > PCI host bridge to bus 0000:00 > > pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > > pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] > > pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] > > ... > > PCI: Discovered peer bus 3f > > PCI: root bus 3f: using default resources > > PCI: Probing PCI hardware (bus 3f) > > ACPI: \: failed to evaluate _DSM (0x1001) > > ... > > pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) > > pnp 00:01: can't evaluate _CRS: 12316 > > ... > > [drm] ACPI BIOS requests an excessive sleep of 4294705151 ms, using 1500 ms instead > -- Meelis Roos (mroos@xxxxxxxx) -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
