Re: [PATCH v2 5/8] v4l: Switch from V4L2 OF not V4L2 fwnode API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Friday 07 Apr 2017 13:58:06 Sakari Ailus wrote:
> On Fri, Apr 07, 2017 at 01:32:54PM +0300, Laurent Pinchart wrote:
> > On Thursday 06 Apr 2017 16:12:07 Sakari Ailus wrote:
> > > Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs.
> > > 
> > > Existing OF matching continues to be supported. omap3isp and smiapp
> > > drivers are converted to fwnode matching as well.
> > > 
> > > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
> > > Acked-by: Benoit Parrot <bparrot@xxxxxx> # i2c/ov2569.c,
> > > am437x/am437x-vpfe.c and ti-vpe/cal.c ---
> > > 
> > >  drivers/media/i2c/Kconfig                      |  9 ++++
> > >  drivers/media/i2c/adv7604.c                    |  7 +--
> > >  drivers/media/i2c/mt9v032.c                    |  7 +--
> > >  drivers/media/i2c/ov2659.c                     |  8 +--
> > >  drivers/media/i2c/s5c73m3/s5c73m3-core.c       |  7 +--
> > >  drivers/media/i2c/s5k5baf.c                    |  6 +--
> > >  drivers/media/i2c/smiapp/Kconfig               |  1 +
> > >  drivers/media/i2c/smiapp/smiapp-core.c         | 29 ++++++-----
> > >  drivers/media/i2c/tc358743.c                   | 11 ++--
> > >  drivers/media/i2c/tvp514x.c                    |  6 +--
> > >  drivers/media/i2c/tvp5150.c                    |  7 +--
> > >  drivers/media/i2c/tvp7002.c                    |  6 +--
> > >  drivers/media/platform/Kconfig                 |  3 ++
> > >  drivers/media/platform/am437x/Kconfig          |  1 +
> > >  drivers/media/platform/am437x/am437x-vpfe.c    |  8 +--
> > >  drivers/media/platform/atmel/Kconfig           |  1 +
> > >  drivers/media/platform/atmel/atmel-isc.c       |  8 +--
> > >  drivers/media/platform/exynos4-is/Kconfig      |  2 +
> > >  drivers/media/platform/exynos4-is/media-dev.c  |  6 +--
> > >  drivers/media/platform/exynos4-is/mipi-csis.c  |  6 +--
> > >  drivers/media/platform/omap3isp/isp.c          | 71  +++++++++---------
> > >  drivers/media/platform/pxa_camera.c            |  7 +--
> > >  drivers/media/platform/rcar-vin/Kconfig        |  1 +
> > >  drivers/media/platform/rcar-vin/rcar-core.c    |  6 +--
> > >  drivers/media/platform/soc_camera/Kconfig      |  1 +
> > >  drivers/media/platform/soc_camera/atmel-isi.c  |  7 +--
> > >  drivers/media/platform/soc_camera/soc_camera.c |  3 +-
> > >  drivers/media/platform/ti-vpe/cal.c            | 11 ++--
> > >  drivers/media/platform/xilinx/Kconfig          |  1 +
> > >  drivers/media/platform/xilinx/xilinx-vipp.c    | 59  +++++++++---------
> > >  include/media/v4l2-fwnode.h                    |  4 +-
> > >  31 files changed, 176 insertions(+), 134 deletions(-)
> > > 
> > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > index cee1dae..6b2423a 100644
> > > --- a/drivers/media/i2c/Kconfig
> > > +++ b/drivers/media/i2c/Kconfig
> > > @@ -210,6 +210,7 @@ config VIDEO_ADV7604
> > > 
> > >  	depends on GPIOLIB || COMPILE_TEST
> > >  	select HDMI
> > >  	select MEDIA_CEC_EDID
> > > 
> > > +	select V4L2_FWNODE
> > 
> > What happens when building the driver on a platform that includes neither
> > OF nor ACPI support ?
> 
> You need either in practice, also for the V4L2 fwnode to be meaningful.
> 
> Do you have something in particular in mind?

I will obviously need either OF or ACPI to use the fwnode API, but some 
drivers still support platform data (either on non-OF embedded systems, or 
when the I2C device is part of a PCI card for instance). Compile-testing is 
also a use case I'm concerned about.

[snip]

> > > diff --git a/drivers/media/platform/omap3isp/isp.c
> > > b/drivers/media/platform/omap3isp/isp.c index 084ecf4a..95850b9 100644
> > > --- a/drivers/media/platform/omap3isp/isp.c
> > > +++ b/drivers/media/platform/omap3isp/isp.c
> > 
> > [snip]
> > 
> > > @@ -2024,43 +2025,42 @@ enum isp_of_phy {
> > >  	ISP_OF_PHY_CSIPHY2,
> > >  };
> > > 
> > > -static int isp_of_parse_node(struct device *dev, struct device_node
> > > *node,
> > > -			     struct isp_async_subdev *isd)
> > > +static int isp_fwnode_parse(struct device *dev, struct fwnode_handle
> > > *fwn,
> > > +			    struct isp_async_subdev *isd)
> > >  {
> > >  	struct isp_bus_cfg *buscfg = &isd->bus;
> > > -	struct v4l2_of_endpoint vep;
> > > +	struct v4l2_fwnode_endpoint vfwn;
> > 
> > vfwn is confusing to me, I think the variable name should show that it
> > refers to an endpoint.
> 
> How about adding ep to tell it's an endpoint?

I'd name is vep or endpoint.

> > >  	unsigned int i;
> > >  	int ret;
> > > 
> > > -	ret = v4l2_of_parse_endpoint(node, &vep);
> > > +	ret = v4l2_fwnode_endpoint_parse(fwn, &vfwn);
> > >  	if (ret)
> > >  		return ret;
> > > 
> > > -	dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
> > > -		vep.base.port);
> > > +	dev_dbg(dev, "interface %u\n", vfwn.base.port);
> > 
> > Is there no way to keep the node name in the error message ?
> 
> There's no generic fwnode means to do something similar currently, possibly
> because I understand ACPI doesn't do that. One could check whether the node
> is an OF node and then use the full_name field but I wonder if it's worth
> it.

My ACPI knowledge is limited, but don't ACPI nodes have 4 character names that 
can be combined in a string to create a full path ?

[snip]

> > > -static int isp_of_parse_nodes(struct device *dev,
> > > -			      struct v4l2_async_notifier *notifier)
> > > +static int isp_fwnodes_parse(struct device *dev,
> > > +			     struct v4l2_async_notifier *notifier)
> > >  {
> > > -	struct device_node *node = NULL;
> > > +	struct fwnode_handle *fwn = NULL;
> > 
> > As explained in the review of another patch from the same series, I
> > wouldn't rename the variable.
> 
> Most pointers to struct fwnode_handle are actually called fwnode and some
> fw_node. fwn is just shorter. :-)
> 
> There are also cases pointers to struct device_node and struct fwnode_handle
> are needed in the same function.

When both are needed in the same function it certainly makes sense to use more 
detailed names. My point is that, in a function that exclusively processes 
fw*, I find calling variables fwn or vfwep more confusing that calling them 
node or endpoint.

> > >  	notifier->subdevs = devm_kcalloc(
> > >  	
> > >  		dev, ISP_MAX_SUBDEVS, sizeof(*notifier->subdevs), GFP_KERNEL);

[snip]

> > > diff --git a/drivers/media/platform/xilinx/xilinx-vipp.c
> > > b/drivers/media/platform/xilinx/xilinx-vipp.c index feb3b2f..6a2721b
> > > 100644
> > > --- a/drivers/media/platform/xilinx/xilinx-vipp.c
> > > +++ b/drivers/media/platform/xilinx/xilinx-vipp.c
> > 
> > [snip]
> > 
> > > @@ -103,9 +103,10 @@ static int xvip_graph_build_one(struct
> > > xvip_composite_device *xdev, * the link.
> > >  		 */
> > >  		
> > >  		if (link.local_port >= local->num_pads) {
> > > 
> > > -			dev_err(xdev->dev, "invalid port number %u on %s\n",
> > > -				link.local_port, link.local_node->full_name);
> > > -			v4l2_of_put_link(&link);
> > > +			dev_err(xdev->dev, "invalid port number %u for %s\n",
> > > +				link.local_port,
> > > +				to_of_node(link.local_node)->full_name);
> > 
> > This makes me believe that we're missing a fwnode_full_name() function.
> 
> It'd be nice to have that, I agree. What should it do on non-OF nodes?
> Return a pointers to an empty string?

See above.

> > > +			v4l2_fwnode_put_link(&link);
> > > 
> > >  			ret = -EINVAL;
> > >  			break;
> > >  		
> > >  		}
> > 
> > [snip]

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux