On Thu, Mar 30, 2017 at 05:14:34PM +0100, John Garry wrote:
>
> >>>>>
> >>>>>Perfect for me. Hanjun, I can cherry pick Marc's patch above, rework
> >>>>>this patch and post the resulting branch for everyone to have a final
> >>>>>test.
> >>>>
> >>>>git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/arm64-acpi-4.12
> >>>>
> >>>>Please have a look and let me know if that's ok, I planned to send
> >>>>a PR to Catalin by the end of the week (first 7 patches up to
> >>>>7fc3061df075 ("ACPI: platform: setup MSI domain for ACPI based platform
> >>>>device")).
> >>>
> >>>Perfect for me too, Lorenzo, Marc, Thank you very much.
> >>>
> >>>I'm currently in paternity leave and can't reach the machine,
> >>>I had a detail review with the patches, they looks good to me,
> >>>Ma Jun and Wei Xu will test on Hisilicon machines and give the
> >>>feedback.
> >>
> >>Thanks to all of you!
> >>Tested on D05 board with this branch, the SAS disks and XGE port are working fine.
> >
> >Ma Jun and Wei Xu, I pushed out a signed tag in preparation for a pull
> >request to Catalin tomorrow, please carry out last few checks before
> >I send it:
> >
> >git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git tags/acpi-arm64-for-v4.12
> >
> >You should try to merge it with Marc's branch:
> >
> >git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git irq/irqchip-4.12
> >
> >and test the resulting branch, that's how they will go upstream.
> >
> >Please let me know, thank you for your help !
> >
>
> Hi Lorenzo,
>
> xuwei is away now, and it is night time with majun, so I tested.
> majun can retest tomorrow again to triple-check. I did not touch the
> ITS patch Marc made which had the weak version of
> iort_pmis_get_dev_id(), but it should not affect anything in my
> test.
>
> After merging your tag to Marc's branch, here is the git log:
> git log --oneline
> 8b6f3f8 Merge tag 'acpi-arm64-for-v4.12' into irq/irqchip-4.12
> d4f54a1 ACPI: platform: setup MSI domain for ACPI based platform device
> ae7c183 ACPI: platform-msi: retrieve devid from IORT
> e6db07d irqchip/gic-v3-its: Add IORT hook for platform MSI support
> 8ca4f1d ACPI/IORT: Introduce iort_node_map_platform_id() to retrieve dev id
> 697f609 ACPI/IORT: Rename iort_node_map_rid() to make it generic
> d11349c irqchip: mbigen: Add ACPI support
> aa15f11 irqchip: mbigen: introduce mbigen_of_create_domain()
> 964bac1 irqchip: mbigen: drop module owner
> b8302fe msi: platform: make platform_msi_create_device_domain() ACPI aware
> d264edb irqchip: gicv3-its: platform-msi: scan MADT to create
> platform msi domain
> baf1168 irqchip: gicv3-its: platform-msi: refactor its_pmsi_init()
> to prepare for ACPI
> fbdda90 irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare()
> cc9eb0d irqchip: gic-v3-its: keep the include header files in
> alphabetic order
> ff3eeb4 irqchip: mtk-sysirq: prevent unnecessary visibility when set_type
> ea04362 irqchip: mtk-sysirq: extend intpol base to arbitrary number
> 3382357 dt-bindings: mediatek: multiple bases support for sysirq
> 4015616 irqchip: replace moxa with ftintc010
> 532278c irqchip: faraday: fix the trigger types
> 923fa67 irqchip: refactor Gemini driver to reflect Faraday origin
> 44d64ce irqchip: augment Gemini bindings to reflect Faraday origin
> c02ed2e Linux 4.11-rc4
>
> And some testing:
>
> dmesg snippet:
> [ 0.000000] Booting Linux on physical CPU 0x10000
> [ 0.000000] Linux version 4.11.0-rc4-00420-g8b6f3f8
> (johnpgarry@johnpgarry-ThinkCentre-M93p) (gcc version 4.8.5 (Linaro
> GCC 4.8-2015.06) ) #4 SMP PREEMPT Thu Mar 30 16:40:36 BST 2017
> [ 0.000000] Boot CPU: AArch64 Processor [410fd082]
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: EFI v2.60 by EDK II
> [ 0.000000] efi: SMBIOS=0x3f040000 SMBIOS 3.0=0x39af0000
> ACPI=0x39bc0000 ACPI 2.0=0x39bc0014 MEMATTR=0x3cc86018
> [ 0.000000] cma: Reserved 16 MiB at 0x000000003e000000
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x0000000039BC0014 000024 (v02 HISI )
> [ 0.000000] ACPI: XSDT 0x0000000039BB00E8 00006C (v01 HISI
> HIP07 00000000 01000013)
> [ 0.000000] ACPI: FACP 0x0000000039A80000 00010C (v05 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: DSDT 0x0000000039A40000 0074E2 (v02 HISI
> HIP07 00000000 INTL 20151218)
> [ 0.000000] ACPI: MCFG 0x0000000039AD0000 0000AC (v01 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: SLIT 0x0000000039AC0000 00003C (v01 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: SPCR 0x0000000039AB0000 000050 (v02 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: SRAT 0x0000000039AA0000 000500 (v03 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: GTDT 0x0000000039A70000 000098 (v02 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: APIC 0x0000000039A60000 0013E4 (v01 HISI
> HIP07 00000000 INTL 20151124)
> [ 0.000000] ACPI: IORT 0x0000000039A50000 000514 (v00 HISI
> HIP07 00000000 INTL 20151218)
> [ 0.000000] ACPI: iBFT 0x0000000031870000 000800 (v01 HISI
> HIP07 00000000 00000000)
>
> PCI:
> root@(none)$ lspci -mk
> 30:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 91:00.0 "Class 0300" "19e5" "1711" "0000" "0000"
> 90:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 20:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 10:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 80:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 00:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> c0:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> 88:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
>
> Integrated NIC:
> root@(none)$ ifconfig eth1 172.18.45.80 up
> root@(none)$ [ 345.449591] hns-nic HISI00C2:01 eth1: link up
> root@(none)$ ping 172.18.45.23
> PING 172.18.45.23 (172.18.45.23): 56 data bytes
> 64 bytes from 172.18.45.23: seq=0 ttl=64 time=2026.837 ms
> 64 bytes from 172.18.45.23: seq=1 ttl=64 time=1026.843 ms
> 64 bytes from 172.18.45.23: seq=2 ttl=64 time=26.834 ms
> 64 bytes from 172.18.45.23: seq=3 ttl=64 time=0.075 ms
> 64 bytes from 172.18.45.23: seq=4 ttl=64 time=0.079 ms
> ^C
> --- 172.18.45.23 ping statistics ---
> 5 packets transmitted, 5 packets received, 0% packet loss
> round-trip min/avg/max = 0.075/616.133/2026.837 ms
>
>
>
> Integrated Storage controller:
> root@(none)$ fdisk -l
> Disk /dev/sdb: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: dos
> Disk identifier: 0xdb9f5cd0
>
> Device Boot Start End Blocks Id System
> /dev/sdb1 2048 209717247 104857600 83 Linux
> /dev/sdb2 209717248 419432447 104857600 83 Linux
>
>
> Disk /dev/sda: 186.3 GiB, 200049647616 bytes, 390721968 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 131072 bytes
>
> Disk /dev/sdc: 186.3 GiB, 200049647616 bytes, 390721968 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 131072 bytes
>
> Disk /dev/sdd: 186.3 GiB, 200049647616 bytes, 390721968 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 131072 bytes
>
> Disk /dev/sde: 186.3 GiB, 200049647616 bytes, 390721968 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 131072 bytes
>
> Disk /dev/sdf: 186.3 GiB, 200049647616 bytes, 390721968 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 131072 bytes
>
> root@(none)$
>
> Looks ok
Great, thanks !
> @majun, please test as well.
Yes, final test, PR is ready to be sent, I reviewed Hanjun patches
but I just want to avoid breaking them given that we had to carry
out changes for the split PR.
Thanks,
Lorenzo
>
> Thanks,
> John
>
> >Lorenzo
> >
> >>The log is as below:
> >>
> >> estuary:/$ dmesg
> >> [ 0.000000] Booting Linux on physical CPU 0x10000
> >> [ 0.000000] Linux version 4.11.0-rc3-14418-gea60d0a (xuwei@EstBuildSvr1) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #28 SMP PREEMPT Thu Mar 30 16:15:42 CST 2017
> >> [ 0.000000] Boot CPU: AArch64 Processor [410fd082]
> >> [ 0.000000] efi: Getting EFI parameters from FDT:
> >> [ 0.000000] efi: EFI v2.60 by EDK II
> >> [ 0.000000] efi: SMBIOS=0x3f040000 SMBIOS 3.0=0x39af0000 ACPI=0x39bc0000 ACPI 2.0=0x39bc0014 MEMATTR=0x3ccb0098
> >> [ 0.000000] cma: Reserved 16 MiB at 0x000000003e000000
> >>
> >>
> >> estuary:/$ ping 192.168.1.107
> >> PING 192.168.1.107 (192.168.1.107): 56 data bytes
> >> 64 bytes from 192.168.1.107: seq=0 ttl=64 time=0.273 ms
> >> 64 bytes from 192.168.1.107: seq=1 ttl=64 time=0.102 ms
> >> 64 bytes from 192.168.1.107: seq=2 ttl=64 time=0.103 ms
> >> 64 bytes from 192.168.1.107: seq=3 ttl=64 time=0.098 ms
> >> ^C
> >> --- 192.168.1.107 ping statistics ---
> >> 4 packets transmitted, 4 packets received, 0% packet loss
> >> round-trip min/avg/max = 0.098/0.144/0.273 ms
> >>
> >> estuary:/$ lspci -mk
> >> 30:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 91:00.0 "Class 0300" "19e5" "1711" "0000" "0000"
> >> 90:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 20:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 10:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 80:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 00:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> c0:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >> 88:00.0 "Class 0604" "19e5" "1610" "0000" "0000" "pcieport"
> >>
> >> estuary:/$ cat /dev/sd
> >> sda sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl
> >> sda1 sdb1 sdc1 sdd1 sde1 sdf1 sdg1 sdh1 sdi1 sdj1 sdk1 sdl1
> >>
> >>Best Regards,
> >>Wei
> >>
> >>>
> >>>Thanks
> >>>Hanjun
> >>>
> >>>.
> >>>
> >>
> >_______________________________________________
> >linuxarm mailing list
> >linuxarm@xxxxxxxxxx
> >http://rnd-openeuler.huawei.com/mailman/listinfo/linuxarm
> >
> >.
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
