Re: [PATCH V12 10/10] arm/arm64: KVM: add guest SEA support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello James,


On 3/7/2017 4:48 AM, James Morse wrote:
On 06/03/17 20:45, Tyler Baicar wrote:
Currently external aborts are unsupported by the guest abort
handling. Add handling for SEAs so that the host kernel reports
SEAs which occur in the guest kernel.
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
index e22089f..a1a3dff 100644
--- a/arch/arm/include/asm/kvm_arm.h
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -187,6 +187,16 @@
  #define FSC_FAULT	(0x04)
  #define FSC_ACCESS	(0x08)
  #define FSC_PERM	(0x0c)
+#define FSC_SEA		(0x10)
+#define FSC_SEA_TTW0	(0x14)
+#define FSC_SEA_TTW1	(0x15)
+#define FSC_SEA_TTW2	(0x16)
+#define FSC_SEA_TTW3	(0x17)
+#define FSC_SECC	(0x18)
+#define FSC_SECC_TTW0	(0x1c)
aarch32 doesn't have either of these 'TW0' values, it's an unused encoding.
(However ...)

+#define FSC_SECC_TTW1	(0x1d)
+#define FSC_SECC_TTW2	(0x1e)
+#define FSC_SECC_TTW3	(0x1f)
/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
  #define HPFAR_MASK	(~0xf)
  #endif /* __ASM_ARM_SYSTEM_MISC_H */
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index a5265ed..f3608c9 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -1444,8 +1463,21 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
/* Check the stage-2 fault is trans. fault or write fault */
  	fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
-	if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
-	    fault_status != FSC_ACCESS) {
+
+	/* The host kernel will handle the synchronous external abort. There
+	 * is no need to pass the error into the guest.
+	 */
+	if (is_abort_synchronous(fault_status)) {
+		if(handle_guest_sea((unsigned long)fault_ipa,
+				    kvm_vcpu_get_hsr(vcpu))) {

... Looking further up in this function:
	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
	if (unlikely(!is_iabt && kvm_vcpu_dabt_isextabt(vcpu))) {
		kvm_inject_vabt(vcpu);
		return 1;
	}
... so external data aborts will have already been 'claimed' by kvm and dealt
with, and we already have a helper for spotting external aborts. (sorry I didn't
spot it earlier).

We need to do the handle_guest_sea() before this code.

kvm_inject_vabt() makes an SError interrupt pending for the guest. This makes a
synchronous error asynchronous as the guest may have SError interrupts masked.

I guess this was the best that could be done at the time of (4055710baca8
"arm/arm64: KVM: Inject virtual abort when guest exits on external abort"), but
in the light of this firmware-first handling, I'm not sure its the right thing
to do.

Is it possible for handle_guest_sea() to return whether it actually found any
work to do? If there was none I think we should keep this kvm_inject_vabt() as
it is the existing behaviour.
Yes, I'll move the handle_guest_sea() call above this. My testing didn't call into that if statement for some reason...it made it to the handle_guest_sea() call successfully.

If there is no work for the GHES code to do it will return and could still make the kvm_inject_vabt() call. It will also return and do that same thing if the error was not fatal in GHES...would that be an issue?

+			kvm_err("Failed to handle guest SEA, FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
+				kvm_vcpu_trap_get_class(vcpu),
+				(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
+				(unsigned long)kvm_vcpu_get_hsr(vcpu));
+			return -EFAULT;
+		}
+	} else if (fault_status != FSC_FAULT && fault_status != FSC_PERM &&
+		   fault_status != FSC_ACCESS) {
  		kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
  			kvm_vcpu_trap_get_class(vcpu),
  			(unsigned long)kvm_vcpu_trap_get_fault(vcpu),

diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index b2d57fc..31c5171 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -602,6 +602,24 @@ static const char *fault_name(unsigned int esr)
  }
/*
+ * Handle Synchronous External Aborts that occur in a guest kernel.
+ */
+int handle_guest_sea(unsigned long addr, unsigned int esr)
+{
+	/*
+	 * synchronize_rcu() will wait for nmi_exit(), so no need to
+	 * rcu_read_lock().
+	 */
This comment has a life of its own! Given we don't always call ghes_notify_sea()
when we interrupted un-interruptable code its not always true. I think the
rcu_read_{,un}lock() should go against the list walk (so it looks like the
examples), and ditch the comment!
:) Okay I will move the rcu calls into ghes_notify_sea() and remove the comments.

Thanks,
Tyler

+	if(IS_ENABLED(ACPI_APEI_SEA)) {
+		rcu_read_lock();
+		ghes_notify_sea();
+		rcu_read_unlock();
+	}
+
+	return 0;
+}
+
+/*
   * Dispatch a data abort to the relevant handler.
   */
  asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr,


--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux