From: Fu Wei <fu.wei@xxxxxxxxxx>
Currently, arch_timer_rate is used to store the frequency got from per-cpu
arch-timer or the memory-mapped (MMIO) timers. But those values come from
different registers which should all be initialized by firmware.
This patch remove arch_timer_rate, and use arch_timer_sysreg_freq and
arch_timer_mmio_freq instead.
Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
---
drivers/clocksource/arm_arch_timer.c | 42 ++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 63fb441..97a4e90 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -65,7 +65,8 @@ struct arch_timer {
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
-static u32 arch_timer_rate;
+static u32 arch_timer_sysreg_freq;
+static u32 arch_timer_mmio_freq;
static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
@@ -417,6 +418,7 @@ static void erratum_workaround_set_sne(struct clock_event_device *clk)
static void __arch_timer_setup(unsigned type,
struct clock_event_device *clk)
{
+ u32 freq;
clk->features = CLOCK_EVT_FEAT_ONESHOT;
if (type == ARCH_TIMER_TYPE_CP15) {
@@ -444,6 +446,7 @@ static void __arch_timer_setup(unsigned type,
}
erratum_workaround_set_sne(clk);
+ freq = arch_timer_sysreg_freq;
} else {
clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
clk->name = "arch_mem_timer";
@@ -460,11 +463,12 @@ static void __arch_timer_setup(unsigned type,
clk->set_next_event =
arch_timer_set_next_event_phys_mem;
}
+ freq = arch_timer_mmio_freq;
}
clk->set_state_shutdown(clk);
- clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
+ clockevents_config_and_register(clk, freq, 0xf, 0x7fffffff);
}
static void arch_timer_evtstrm_enable(int divider)
@@ -487,7 +491,7 @@ static void arch_timer_configure_evtstream(void)
int evt_stream_div, pos;
/* Find the closest power of two to the divisor */
- evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
+ evt_stream_div = arch_timer_sysreg_freq / ARCH_TIMER_EVT_STREAM_FREQ;
pos = fls(evt_stream_div);
if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
pos--;
@@ -578,8 +582,8 @@ static void arch_timer_banner(unsigned type)
type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
" and " : "",
type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
- (unsigned long)arch_timer_rate / 1000000,
- (unsigned long)(arch_timer_rate / 10000) % 100,
+ (unsigned long)arch_timer_sysreg_freq / 1000000,
+ (unsigned long)(arch_timer_sysreg_freq / 10000) % 100,
type & ARCH_TIMER_TYPE_CP15 ?
(arch_timer_uses_ppi == ARCH_TIMER_VIRT_PPI) ? "virt" : "phys" :
"",
@@ -591,7 +595,7 @@ static void arch_timer_banner(unsigned type)
u32 arch_timer_get_rate(void)
{
- return arch_timer_rate;
+ return arch_timer_sysreg_freq;
}
static u64 arch_counter_get_cntvct_mem(void)
@@ -648,6 +652,7 @@ struct arch_timer_kvm_info *arch_timer_get_kvm_info(void)
static void __init arch_counter_register(unsigned type)
{
u64 start_count;
+ u32 freq;
/* Register the CP15 based counter if we have one */
if (type & ARCH_TIMER_TYPE_CP15) {
@@ -657,6 +662,8 @@ static void __init arch_counter_register(unsigned type)
else
arch_timer_read_counter = arch_counter_get_cntpct;
+ freq = arch_timer_sysreg_freq;
+
clocksource_counter.archdata.vdso_direct = true;
#ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND
@@ -669,19 +676,20 @@ static void __init arch_counter_register(unsigned type)
#endif
} else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;
+ freq = arch_timer_mmio_freq;
}
if (!arch_counter_suspend_stop)
clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
start_count = arch_timer_read_counter();
- clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+ clocksource_register_hz(&clocksource_counter, freq);
cyclecounter.mult = clocksource_counter.mult;
cyclecounter.shift = clocksource_counter.shift;
timecounter_init(&arch_timer_kvm_info.timecounter,
&cyclecounter, start_count);
/* 56 bits minimum, so we assume worst case rollover */
- sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
+ sched_clock_register(arch_timer_read_counter, 56, freq);
}
static void arch_timer_stop(struct clock_event_device *clk)
@@ -949,10 +957,9 @@ static int __init arch_timer_of_init(struct device_node *np)
* Try to determine the frequency from the device tree,
* if fail, get the frequency from the sysreg CNTFRQ.
*/
- if (!arch_timer_rate &&
- of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_rate = arch_timer_get_sysreg_freq();
- if (!arch_timer_rate) {
+ if (of_property_read_u32(np, "clock-frequency", &arch_timer_sysreg_freq))
+ arch_timer_sysreg_freq = arch_timer_get_sysreg_freq();
+ if (!arch_timer_sysreg_freq) {
pr_err(FW_BUG "frequency not available.\n");
return -EINVAL;
}
@@ -1070,10 +1077,9 @@ static int __init arch_timer_mem_init(struct device_node *np)
* Try to determine the frequency from the device tree,
* if fail, get the frequency from the CNTFRQ reg of MMIO timer.
*/
- if (!arch_timer_rate &&
- of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_rate = arch_timer_get_mmio_freq(base);
- if (!arch_timer_rate) {
+ if (of_property_read_u32(np, "clock-frequency", &arch_timer_mmio_freq))
+ arch_timer_mmio_freq = arch_timer_get_mmio_freq(base);
+ if (!arch_timer_mmio_freq) {
pr_err(FW_BUG "frequency not available for MMIO timer.\n");
ret = -EINVAL;
goto out;
@@ -1140,8 +1146,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
gtdt->non_secure_el2_flags);
/* Get the frequency from the sysreg CNTFRQ */
- arch_timer_rate = arch_timer_get_sysreg_freq();
- if (!arch_timer_rate) {
+ arch_timer_sysreg_freq = arch_timer_get_sysreg_freq();
+ if (!arch_timer_sysreg_freq) {
pr_err(FW_BUG "frequency not available.\n");
return -EINVAL;
}
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
