RE: [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Robin,

>>
>>> -----Original Message-----
>>> From: linux-arm-kernel [mailto:linux-arm-kernel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Sricharan R
>>> Sent: Friday, February 03, 2017 9:19 PM
>>> To: robin.murphy@xxxxxxx; will.deacon@xxxxxxx; joro@xxxxxxxxxx; lorenzo.pieralisi@xxxxxxx; iommu@lists.linux-
>foundation.org;
>>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; m.szyprowski@xxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
>linux-
>>> pci@xxxxxxxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx; tn@xxxxxxxxxxxx; hanjun.guo@xxxxxxxxxx; okaya@xxxxxxxxxxxxxx
>>> Cc: sricharan@xxxxxxxxxxxxxx
>>> Subject: [PATCH V8 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
>>>
>>> This is an equivalent to the DT's handling of the iommu master's probe
>>> with deferred probing when the corrsponding iommu is not probed yet.
>>> The lack of a registered IOMMU can be caused by the lack of a driver for
>>> the IOMMU, the IOMMU device probe not having been performed yet, having
>>> been deferred, or having failed.
>>>
>>> The first case occurs when the firmware describes the bus master and
>>> IOMMU topology correctly but no device driver exists for the IOMMU yet
>>> or the device driver has not been compiled in. Return NULL, the caller
>>> will configure the device without an IOMMU.
>>>
>>> The second and third cases are handled by deferring the probe of the bus
>>> master device which will eventually get reprobed after the IOMMU.
>>>
>>> The last case is currently handled by deferring the probe of the bus
>>> master device as well. A mechanism to either configure the bus master
>>> device without an IOMMU or to fail the bus master device probe depending
>>> on whether the IOMMU is optional or mandatory would be a good
>>> enhancement.
>>>
>>> Tested-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
>>> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
>>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>>> ---
>>> drivers/acpi/arm64/iort.c  | 25 ++++++++++++++++++++++++-
>>> drivers/acpi/scan.c        |  7 +++++--
>>> drivers/base/dma-mapping.c |  2 +-
>>> include/acpi/acpi_bus.h    |  2 +-
>>> include/linux/acpi.h       |  7 +++++--
>>> 5 files changed, 36 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
>>> index bf0ed09..d01bae8 100644
>>> --- a/drivers/acpi/arm64/iort.c
>>> +++ b/drivers/acpi/arm64/iort.c
>>> @@ -550,8 +550,17 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
>>> 			return NULL;
>>>
>>> 		ops = iommu_get_instance(iort_fwnode);
>>> +		/*
>>> +		 * If the ops look-up fails, this means that either
>>> +		 * the SMMU drivers have not been probed yet or that
>>> +		 * the SMMU drivers are not built in the kernel;
>>> +		 * Depending on whether the SMMU drivers are built-in
>>> +		 * in the kernel or not, defer the IOMMU configuration
>>> +		 * or just abort it.
>>> +		 */
>>> 		if (!ops)
>>> -			return NULL;
>>> +			return iort_iommu_driver_enabled(node->type) ?
>>> +			       ERR_PTR(-EPROBE_DEFER) : NULL;
>>>
>>> 		ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
>>> 	}
>>> @@ -625,12 +634,26 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
>>>
>>> 		while (parent) {
>>> 			ops = iort_iommu_xlate(dev, parent, streamid);
>>> +			if (IS_ERR_OR_NULL(ops))
>>> +				return ops;
>>>
>>> 			parent = iort_node_get_id(node, &streamid,
>>> 						  IORT_IOMMU_TYPE, i++);
>>> 		}
>>> 	}
>>>
>>> +	/*
>>> +	 * If we have reason to believe the IOMMU driver missed the initial
>>> +	 * add_device callback for dev, replay it to get things in order.
>>> +	 */
>>> +	if (!IS_ERR_OR_NULL(ops) && ops->add_device &&
>>> +	    dev->bus && !dev->iommu_group) {
>>> +		int err = ops->add_device(dev);
>>> +
>>> +		if (err)
>>> +			ops = ERR_PTR(err);
>>> +	}
>>> +
>>
>> On the last post we discussed that the above replay hunk can be made
>> common. In trying to do that, i ended up with a patch like below. But not
>> sure if that should be a part of this series though. I tested with OF devices
>> and would have to be tested with ACPI devices once. Nothing changes
>> functionally because of this ideally. Should be split in two patches though.
>>
>> Regards,
>>  Sricharan
>>
>> From aafbf2c97375a086327504f2367eaf9197c719b1 Mon Sep 17 00:00:00 2001
>> From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> Date: Fri, 3 Feb 2017 15:24:47 +0530
>> Subject: [PATCH] drivers: iommu: Add iommu_add_device api
>>
>> The code to call IOMMU driver's add_device is same
>> for both OF and ACPI cases. So add an api which can
>> be shared across both the places.
>>
>> Also, now with probe-deferral the iommu master devices gets
>> added to the respective iommus during probe time instead
>> of device creation time. The xlate callbacks of iommu
>> drivers are also called only at probe time. As a result
>> the add_iommu_group which gets called when the iommu is
>> registered to add all devices created before the iommu
>> becomes dummy. Similar the BUS_NOTIFY_ADD_DEVICE notification
>> also is not needed. So just cleanup those code.
>>
>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> ---
>>  drivers/acpi/arm64/iort.c | 12 +-------
>>  drivers/iommu/iommu.c     | 70 ++++++++++++-----------------------------------
>>  drivers/iommu/of_iommu.c  | 11 +-------
>>  include/linux/iommu.h     |  8 ++++++
>>  4 files changed, 27 insertions(+), 74 deletions(-)
>>
>> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
>> index ac45623..ab2a554 100644
>> --- a/drivers/acpi/arm64/iort.c
>> +++ b/drivers/acpi/arm64/iort.c
>> @@ -642,17 +642,7 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
>>                 }
>>         }
>>
>> -       /*
>> -        * If we have reason to believe the IOMMU driver missed the initial
>> -        * add_device callback for dev, replay it to get things in order.
>> -        */
>> -       if (!IS_ERR_OR_NULL(ops) && ops->add_device &&
>> -           dev->bus && !dev->iommu_group) {
>> -               int err = ops->add_device(dev);
>> -
>> -               if (err)
>> -                       ops = ERR_PTR(err);
>> -       }
>> +       ops = iommu_add_device(dev, ops);
>>
>>         return ops;
>>  }
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index b752c3d..750552d 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -1015,41 +1015,6 @@ struct iommu_domain *iommu_group_default_domain(struct iommu_group *group)
>>         return group->default_domain;
>>  }
>>
>> -static int add_iommu_group(struct device *dev, void *data)
>> -{
>> -       struct iommu_callback_data *cb = data;
>> -       const struct iommu_ops *ops = cb->ops;
>> -       int ret;
>> -
>> -       if (!ops->add_device)
>> -               return 0;
>> -
>> -       WARN_ON(dev->iommu_group);
>> -
>> -       ret = ops->add_device(dev);
>> -
>> -       /*
>> -        * We ignore -ENODEV errors for now, as they just mean that the
>> -        * device is not translated by an IOMMU. We still care about
>> -        * other errors and fail to initialize when they happen.
>> -        */
>> -       if (ret == -ENODEV)
>> -               ret = 0;
>> -
>> -       return ret;
>> -}
>> -
>> -static int remove_iommu_group(struct device *dev, void *data)
>> -{
>> -       struct iommu_callback_data *cb = data;
>> -       const struct iommu_ops *ops = cb->ops;
>> -
>> -       if (ops->remove_device && dev->iommu_group)
>> -               ops->remove_device(dev);
>> -
>> -       return 0;
>> -}
>> -
>>  static int iommu_bus_notifier(struct notifier_block *nb,
>>                               unsigned long action, void *data)
>>  {
>> @@ -1059,13 +1024,10 @@ static int iommu_bus_notifier(struct notifier_block *nb,
>>         unsigned long group_action = 0;
>>
>>         /*
>> -        * ADD/DEL call into iommu driver ops if provided, which may
>> +        * DEL call into iommu driver ops if provided, which may
>>          * result in ADD/DEL notifiers to group->notifier
>>          */
>> -       if (action == BUS_NOTIFY_ADD_DEVICE) {
>> -               if (ops->add_device)
>> -                       return ops->add_device(dev);
>
>I'm pretty sure this completely breaks x86 and anyone else...
>

ha, i just missed thinking about non-arm, for this super cleanup :)

>Anyway, I'd be inclined to leave this alone for now - it's essentially
>just a workaround to mesh the per-instance probing behaviour with the
>per-bus ops model, so it's bound to be a bit ugly. Moving the IOMMU core
>code over to a per-instance model will inevitably subsume the underlying
>problem, and I think a bit of duplication is probably the lesser of two
>evils in the meantime. On which note, I need to have a good look at
>Joerg's shiny new series :)
>

Agree, better way for this cleanup is with the per-instance model and let
the series go otherwise.

Regards,
 Sricharan

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux