Re: [PATCH v13 3/7] arm64: pmu: Cache PMU interrupt numbers from MADT parse

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 17, 2017 at 02:50:06PM -0600, Jeremy Linton wrote:
> From: Mark Salter <msalter@xxxxxxxxxx>
> 
> In the case of ACPI, the PMU IRQ information is contained in the
> MADT table. Also, since the PMU does not exist as a device in the
> ACPI DSDT table, it is necessary to create a platform device so
> that the appropriate driver probing is triggered. Since the platform
> device creation needs to happen after the CPU's have been started, and
> the MADT parsing needs to happen before, we save off the interrupt
> numbers discovered during the parsing.
> 
> Signed-off-by: Mark Salter <msalter@xxxxxxxxxx>
> Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
> ---
>  arch/arm64/kernel/smp.c      |  5 +++++
>  drivers/perf/Kconfig         |  4 ++++
>  drivers/perf/Makefile        |  1 +
>  drivers/perf/arm_pmu_acpi.c  | 40 ++++++++++++++++++++++++++++++++++++++++
>  include/linux/perf/arm_pmu.h |  7 +++++++
>  5 files changed, 57 insertions(+)
>  create mode 100644 drivers/perf/arm_pmu_acpi.c
> 
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index 8ea244c..cbaab44 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -37,6 +37,7 @@
>  #include <linux/completion.h>
>  #include <linux/of.h>
>  #include <linux/irq_work.h>
> +#include <linux/perf/arm_pmu.h>
>  
>  #include <asm/alternative.h>
>  #include <asm/atomic.h>
> @@ -552,6 +553,7 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>  		}
>  		bootcpu_valid = true;
>  		early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid));
> +		arm_pmu_parse_acpi(0, processor);
>  		return;
>  	}
>  
> @@ -572,6 +574,9 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>  	 */
>  	acpi_set_mailbox_entry(cpu_count, processor);
>  
> +	/* get PMU irq info */
> +	arm_pmu_parse_acpi(cpu_count, processor);
> +
>  	early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count, hwid));
>  
>  	cpu_count++;
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 4d5c5f9..697df05 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -19,4 +19,8 @@ config XGENE_PMU
>          help
>            Say y if you want to use APM X-Gene SoC performance monitors.
>  
> +config ARM_PMU_ACPI
> +	def_bool y
> +	depends on ARM_PMU && ACPI
> +
>  endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index b116e98..d1d7762 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_ARM_PMU) += arm_pmu.o
>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
> +obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
> diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
> new file mode 100644
> index 0000000..2008001
> --- /dev/null
> +++ b/drivers/perf/arm_pmu_acpi.c
> @@ -0,0 +1,40 @@
> +/*
> + * ARM ACPI PMU support
> + *
> + * Copyright (C) 2015 Red Hat Inc.
> + * Author: Mark Salter <msalter@xxxxxxxxxx>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.  See
> + * the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include <asm/cpu.h>
> +#include <linux/acpi.h>
> +#include <linux/irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/list.h>
> +#include <linux/perf/arm_pmu.h>
> +#include <linux/platform_device.h>

Nit: You should trim this include list, it is hardly needed in this patch
stand-alone.

> +struct pmu_irq {
> +	int  gsi;
> +	int  trigger;
> +	bool used;
> +};
> +
> +static struct pmu_irq pmu_irqs[NR_CPUS];
> +
> +/*
> + * Called from acpi_verify_and_map_madt()'s MADT parsing during boot.

You will have to update the function name according to what we end up doing
in patch 1.

> + * This routine saves off the GSI's and their trigger state for use when we are
> + * ready to build the PMU platform device.
> + */
> +void __init arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic)
> +{
> +	pmu_irqs[cpu].gsi = gic->performance_interrupt;
> +	if (gic->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
> +		pmu_irqs[cpu].trigger = ACPI_EDGE_SENSITIVE;
> +	else
> +		pmu_irqs[cpu].trigger = ACPI_LEVEL_SENSITIVE;
> +}
> diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
> index 8462da2..df1ba55 100644
> --- a/include/linux/perf/arm_pmu.h
> +++ b/include/linux/perf/arm_pmu.h
> @@ -164,4 +164,11 @@ int arm_pmu_device_probe(struct platform_device *pdev,
>  
>  #endif /* CONFIG_ARM_PMU */
>  
> +#ifdef CONFIG_ARM_PMU_ACPI
> +struct acpi_madt_generic_interrupt;
> +void arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic);

Adding __init tag here too would not hurt.

Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>

> +#else
> +#define arm_pmu_parse_acpi(a, b) do { } while (0)
> +#endif /* CONFIG_ARM_PMU_ACPI */
> +
>  #endif /* __ARM_PMU_H__ */
> -- 
> 2.5.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux