On Tue, 2017-01-17 at 15:57 -0600, Pierre-Louis Bossart wrote: > These patches specifically enable the audio MCLK required by Baytrail > CR devices. It is the remaining part of a bigger set of patches > (already merged in Mark Brown's tree) that enable sound for Baytrail > CR > devices (especially Asus T100TAF) [1]. They include the clock driver > and clock enabling in the pmc_atom code (along with moving of the > non-architectural pmc_atom driver code into drivers/platform/x86 as > suggested by Thomas Gleixner [2]). This move includes a new header in > include/linux/platform_data/x86/. While there is an agreement that the > definitions for PMC clocks are not really platform data this location > is seen as a good-enough compromise with an agreement between Darren > Hart and Andy Shevchenko [3] > > [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/1 > 11704.html > [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-October/ > 113936.html > [3] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-December > /115892.html > Stephen, I see no issues with the patches. If you want to push them through your tree, take a tag from PDx86 subsystem point of view: Acked-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > Changes from v6: > - Addressed comments from Stephen Boyd, Andy Shevchenko and Vinod > Koul > - Renamed clk-byt-plt to clk-pmc-atom > - Rebase to 4.10-rc3 (broonie/for-next) > - Added helper functions to make error handling more compact > - Removed module-related code since it's not possible/supported > - Removed useless tests on remove > - PMC_CLK_OFFSET move to clk-pcm-atom (more logical) > - Split typo correction and makefile fix in separate patches > - small fixes (spaces, defaults in switches, alphabetical order, use > of > clk_writel/readl and no test on write, simpler error handling, use of > while(i--), unsigned loop variables, kernel doc fields, format-patch > -M > -C -D, use of PLATFORM_DEVID_NONE) > > Changes from v5: > - fix build error reported by kbuild test robot > - split the clk driver code from x86 platform changes > > Changes from v4: > - move the pmc_atom driver from arch/x86/platform/atom to > drivers/platform/x86 > > Changes from v3: > - replace devm_kzalloc with devm_kcalloc > - add x86 architecture maintainers > > Changes from v2: > - move clk platform data structures to a separate include file > - store clk_hw pointer for the fixed rate clocks > > Changes from v1: > - register the clk device as child of pmc device > - pass iomem pointer from pmc driver to clk driver to avoid using > pmc_atom_read()/write() and use readl/writel API instead > - use devm_clk_hw_register/clkdev_hw_create instead of > clk_register/clkdev_create > > Irina Tirdea (3): > clk: x86: Add Atom PMC platform clocks > arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 > platform/x86: Enable Atom PMC platform clocks > > Pierre-Louis Bossart (2): > clk: Make x86/ conditional on CONFIG_COMMON_CLK > platform/x86: fix typo in comment > > arch/x86/Kconfig | 4 - > arch/x86/platform/atom/Makefile | 1 - > drivers/acpi/acpi_lpss.c | 2 +- > drivers/clk/Makefile | 2 + > drivers/clk/x86/Makefile | 1 + > drivers/clk/x86/clk-pmc-atom.c | 373 > +++++++++++++++++++++ > drivers/platform/x86/Kconfig | 5 + > drivers/platform/x86/Makefile | 1 + > .../atom => drivers/platform/x86}/pmc_atom.c | 88 ++++- > include/linux/platform_data/x86/clk-pmc-atom.h | 44 +++ > .../linux/platform_data/x86}/pmc_atom.h | 2 +- > 11 files changed, 508 insertions(+), 15 deletions(-) > create mode 100644 drivers/clk/x86/clk-pmc-atom.c > rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c > (87%) > create mode 100644 include/linux/platform_data/x86/clk-pmc-atom.h > rename {arch/x86/include/asm => > include/linux/platform_data/x86}/pmc_atom.h (98%) > -- Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Intel Finland Oy -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
