Re: [PATCH V1] i2c: designware: fix wrong tx/rx fifo for ACPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 29, 2016 at 10:32:07AM +0700, Tin Huynh wrote:
> ACPI always sets txfifo and rxfifo to 32. This configuration will
> cause problem if the IP core supports a fifo size of 16 bytes only.
> Set the default value to 0 so the driver will get these parameters 
> from IP core.

Except when those values are not available which is the reason why we
have the default 32 for ACPI systems.

Are you saying you have DW I2C controller on ACPI system where the FIFO
is smaller than 32?
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux