Re: [PATCH] PCI: Add information about describing PCI in ACPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17 November 2016 at 17:59, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
> Add a writeup about how PCI host bridges should be described in ACPI
> using PNP0A03/PNP0A08 devices, PNP0C02 devices, and the MCFG table.
>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> ---
>  Documentation/PCI/00-INDEX      |    2 +
>  Documentation/PCI/acpi-info.txt |  136 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 138 insertions(+)
>  create mode 100644 Documentation/PCI/acpi-info.txt
>
> diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
> index 147231f..0780280 100644
> --- a/Documentation/PCI/00-INDEX
> +++ b/Documentation/PCI/00-INDEX
> @@ -1,5 +1,7 @@
>  00-INDEX
>         - this file
> +acpi-info.txt
> +       - info on how PCI host bridges are represented in ACPI
>  MSI-HOWTO.txt
>         - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
>  PCIEBUS-HOWTO.txt
> diff --git a/Documentation/PCI/acpi-info.txt b/Documentation/PCI/acpi-info.txt
> new file mode 100644
> index 0000000..ccbcfda
> --- /dev/null
> +++ b/Documentation/PCI/acpi-info.txt
> @@ -0,0 +1,136 @@
> +           ACPI considerations for PCI host bridges
> +
> +The basic requirement is that the ACPI namespace should describe
> +*everything* that consumes address space unless there's another
> +standard way for the OS to find it [1, 2].  For example, windows that
> +are forwarded to PCI by a PCI host bridge should be described via ACPI
> +devices, since the OS can't locate the host bridge by itself.  PCI
> +devices *below* the host bridge do not need to be described via ACPI,
> +because the resources they consume are inside the host bridge windows,
> +and the OS can discover them via the standard PCI enumeration
> +mechanism (using config accesses to read and size the BARs).
> +
> +This ACPI resource description is done via _CRS methods of devices in
> +the ACPI namespace [2].   _CRS methods are like generalized PCI BARs:
> +the OS can read _CRS and figure out what resource is being consumed
> +even if it doesn't have a driver for the device [3].  That's important
> +because it means an old OS can work correctly even on a system with
> +new devices unknown to the OS.  The new devices won't do anything, but
> +the OS can at least make sure no resources conflict with them.
> +
> +Static tables like MCFG, HPET, ECDT, etc., are *not* mechanisms for
> +reserving address space!  The static tables are for things the OS
> +needs to know early in boot, before it can parse the ACPI namespace.
> +If a new table is defined, an old OS needs to operate correctly even
> +though it ignores the table.  _CRS allows that because it is generic
> +and understood by the old OS; a static table does not.
> +
> +If the OS is expected to manage an ACPI device, that device will have
> +a specific _HID/_CID that tells the OS what driver to bind to it, and
> +the _CRS tells the OS and the driver where the device's registers are.
> +
> +PNP0C02 "motherboard" devices are basically a catch-all.  There's no
> +programming model for them other than "don't use these resources for
> +anything else."  So any address space that is (1) not claimed by some
> +other ACPI device and (2) should not be assigned by the OS to
> +something else, should be claimed by a PNP0C02 _CRS method.
> +
> +PCI host bridges are PNP0A03 or PNP0A08 devices.  Their _CRS should
> +describe all the address space they consume.  In principle, this would
> +be all the windows they forward down to the PCI bus, as well as the
> +bridge registers themselves.  The bridge registers include things like
> +secondary/subordinate bus registers that determine the bus range below
> +the bridge, window registers that describe the apertures, etc.  These
> +are all device-specific, non-architected things, so the only way a
> +PNP0A03/PNP0A08 driver can manage them is via _PRS/_CRS/_SRS, which
> +contain the device-specific details.  These bridge registers also
> +include ECAM space, since it is consumed by the bridge.
> +
> +ACPI defined a Producer/Consumer bit that was intended to distinguish
> +the bridge apertures from the bridge registers [4, 5].  However,
> +BIOSes didn't use that bit correctly, and the result is that OSes have
> +to assume that everything in a PCI host bridge _CRS is a window.  That
> +leaves no way to describe the bridge registers in the PNP0A03/PNP0A08
> +device itself.
> +

Is that universally true? Or is it still possible to do the right
thing here on new ACPI architectures such as arm64?

> +The workaround is to describe the bridge registers (including ECAM
> +space) in PNP0C02 catch-all devices [6].  With the exception of ECAM,
> +the bridge register space is device-specific anyway, so the generic
> +PNP0A03/PNP0A08 driver (pci_root.c) has no need to know about it.  For
> +ECAM, pci_root.c learns about the space from either MCFG or the _CBA
> +method.
> +
> +Note that the PCIe spec actually does require ECAM unless there's a
> +standard firmware interface for config access, e.g., the ia64 SAL
> +interface [7].  One reason is that we want a generic host bridge
> +driver (pci_root.c), and a generic driver requires a generic way to
> +access config space.
> +
> +
> +[1] ACPI 6.0, sec 6.1:
> +    For any device that is on a non-enumerable type of bus (for
> +    example, an ISA bus), OSPM enumerates the devices' identifier(s)
> +    and the ACPI system firmware must supply an _HID object ... for
> +    each device to enable OSPM to do that.
> +
> +[2] ACPI 6.0, sec 3.7:
> +    The OS enumerates motherboard devices simply by reading through
> +    the ACPI Namespace looking for devices with hardware IDs.
> +
> +    Each device enumerated by ACPI includes ACPI-defined objects in
> +    the ACPI Namespace that report the hardware resources the device
> +    could occupy [_PRS], an object that reports the resources that are
> +    currently used by the device [_CRS], and objects for configuring
> +    those resources [_SRS].  The information is used by the Plug and
> +    Play OS (OSPM) to configure the devices.
> +
> +[3] ACPI 6.0, sec 6.2:
> +    OSPM uses device configuration objects to configure hardware
> +    resources for devices enumerated via ACPI.  Device configuration
> +    objects provide information about current and possible resource
> +    requirements, the relationship between shared resources, and
> +    methods for configuring hardware resources.
> +
> +    When OSPM enumerates a device, it calls _PRS to determine the
> +    resource requirements of the device.  It may also call _CRS to
> +    find the current resource settings for the device.  Using this
> +    information, the Plug and Play system determines what resources
> +    the device should consume and sets those resources by calling the
> +    device’s _SRS control method.
> +
> +    In ACPI, devices can consume resources (for example, legacy
> +    keyboards), provide resources (for example, a proprietary PCI
> +    bridge), or do both.  Unless otherwise specified, resources for a
> +    device are assumed to be taken from the nearest matching resource
> +    above the device in the device hierarchy.
> +
> +[4] ACPI 6.0, sec 6.4.3.5.4:
> +    Extended Address Space Descriptor
> +    General Flags: Bit [0] Consumer/Producer:
> +       1–This device consumes this resource
> +       0–This device produces and consumes this resource
> +
> +[5] ACPI 6.0, sec 19.6.43:
> +    ResourceUsage specifies whether the Memory range is consumed by
> +    this device (ResourceConsumer) or passed on to child devices
> +    (ResourceProducer).  If nothing is specified, then
> +    ResourceConsumer is assumed.
> +
> +[6] PCI Firmware 3.0, sec 4.1.2:
> +    If the operating system does not natively comprehend reserving the
> +    MMCFG region, the MMCFG region must be reserved by firmware.  The
> +    address range reported in the MCFG table or by _CBA method (see
> +    Section 4.1.3) must be reserved by declaring a motherboard
> +    resource.  For most systems, the motherboard resource would appear
> +    at the root of the ACPI namespace (under \_SB) in a node with a
> +    _HID of EISAID (PNP0C02), and the resources in this case should
> +    not be claimed in the root PCI bus’s _CRS.  The resources can
> +    optionally be returned in Int15 E820 or EFIGetMemoryMap as
> +    reserved memory but must always be reported through ACPI as a
> +    motherboard resource.
> +
> +[7] PCI Express 3.0, sec 7.2.2:
> +    For systems that are PC-compatible, or that do not implement a
> +    processor-architecture-specific firmware interface standard that
> +    allows access to the Configuration Space, the ECAM is required as
> +    defined in this section.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux