On Wed, Nov 16, 2016 at 07:59:38PM +0800, Dongdong Liu wrote:
> Hi Bjorn
>
> Many Thanks for your review
>
> 在 2016/11/15 7:33, Bjorn Helgaas 写道:
> >On Wed, Nov 09, 2016 at 05:14:57PM +0800, Dongdong Liu wrote:
> >>PCIe controller in Hip05/HIP06/HIP07 SoCs is not ECAM compliant.
> >>It is non ECAM only for the RC bus config space;for any other bus
> >>underneath the root bus we support ECAM access.
> >>Add specific quirks for PCI config space accessors.This involves:
> >>1. New initialization call hisi_pcie_init() to obtain rc base
> >>addresses from PNP0C02 as subdevice of PNP0A03.
> >>2. New entry in common quirk array.
> >>
> >>Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
> >>Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> >>---
> >> MAINTAINERS | 1 +
> >> drivers/acpi/pci_mcfg.c | 13 ++++
> >> drivers/pci/host/Kconfig | 8 ++
> >> drivers/pci/host/Makefile | 1 +
> >> drivers/pci/host/pcie-hisi-acpi.c | 157 ++++++++++++++++++++++++++++++++++++++
> >> include/linux/pci-ecam.h | 5 ++
> >> 6 files changed, 185 insertions(+)
> >> create mode 100644 drivers/pci/host/pcie-hisi-acpi.c
> >>
> >>diff --git a/MAINTAINERS b/MAINTAINERS
> >>index 1cd38a7..b224caa 100644
> >>--- a/MAINTAINERS
> >>+++ b/MAINTAINERS
> >>@@ -9358,6 +9358,7 @@ L: linux-pci@xxxxxxxxxxxxxxx
> >> S: Maintained
> >> F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> >> F: drivers/pci/host/pcie-hisi.c
> >>+F: drivers/pci/host/pcie-hisi-acpi.c
> >>
> >> PCIE DRIVER FOR ROCKCHIP
> >> M: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> >>diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> >>index ac21db3..b1b6fc7 100644
> >>--- a/drivers/acpi/pci_mcfg.c
> >>+++ b/drivers/acpi/pci_mcfg.c
> >>@@ -57,6 +57,19 @@ struct mcfg_fixup {
> >> { "QCOM ", "QDF2432 ", 1, 5, MCFG_BUS_ANY, &pci_32b_ops },
> >> { "QCOM ", "QDF2432 ", 1, 6, MCFG_BUS_ANY, &pci_32b_ops },
> >> { "QCOM ", "QDF2432 ", 1, 7, MCFG_BUS_ANY, &pci_32b_ops },
> >>+#ifdef CONFIG_PCI_HISI_ACPI
> >>+ #define PCI_ACPI_QUIRK_QUAD_DOM(table_id, seg, ops) \
> >>+ { "HISI ", table_id, 0, seg + 0, MCFG_BUS_ANY, ops }, \
> >>+ { "HISI ", table_id, 0, seg + 1, MCFG_BUS_ANY, ops }, \
> >>+ { "HISI ", table_id, 0, seg + 2, MCFG_BUS_ANY, ops }, \
> >>+ { "HISI ", table_id, 0, seg + 3, MCFG_BUS_ANY, ops }
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP05 ", 0, &hisi_pcie_ops),
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP06 ", 0, &hisi_pcie_ops),
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP07 ", 0, &hisi_pcie_ops),
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP07 ", 4, &hisi_pcie_ops),
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP07 ", 8, &hisi_pcie_ops),
> >>+ PCI_ACPI_QUIRK_QUAD_DOM("HIP07 ", 12, &hisi_pcie_ops),
> >>+#endif
> >> };
> >>
> >> static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
> >>diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> >>index ae98644..9ff2bcd 100644
> >>--- a/drivers/pci/host/Kconfig
> >>+++ b/drivers/pci/host/Kconfig
> >>@@ -227,6 +227,14 @@ config PCI_HISI
> >> Say Y here if you want PCIe controller support on HiSilicon
> >> Hip05 and Hip06 and Hip07 SoCs
> >>
> >>+config PCI_HISI_ACPI
> >>+ depends on ACPI && ARM64
> >>+ bool "HiSilicon Hip05 and Hip06 and Hip07 SoCs ACPI PCIe controllers"
> >>+ select PNP
> >>+ help
> >>+ Say Y here if you want ACPI PCIe controller support on HiSilicon
> >>+ Hip05 and Hip06 and Hip07 SoCs
> >>+
> >> config PCIE_QCOM
> >> bool "Qualcomm PCIe controller"
> >> depends on ARCH_QCOM && OF
> >>diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> >>index 084cb49..9402858 100644
> >>--- a/drivers/pci/host/Makefile
> >>+++ b/drivers/pci/host/Makefile
> >>@@ -26,6 +26,7 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
> >> obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
> >> obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
> >> obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
> >>+obj-$(CONFIG_PCI_HISI_ACPI) += pcie-hisi-acpi.o
> >> obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> >> obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
> >> obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
> >>diff --git a/drivers/pci/host/pcie-hisi-acpi.c b/drivers/pci/host/pcie-hisi-acpi.c
> >>new file mode 100644
> >>index 0000000..aade4b5
> >>--- /dev/null
> >>+++ b/drivers/pci/host/pcie-hisi-acpi.c
> >>@@ -0,0 +1,157 @@
> >>+/*
> >>+ * PCIe host controller driver for HiSilicon HipXX SoCs
> >>+ *
> >>+ * Copyright (C) 2016 HiSilicon Co., Ltd. http://www.hisilicon.com
> >>+ *
> >>+ * Author: Dongdong Liu <liudongdong3@xxxxxxxxxx>
> >>+ * Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> >>+ *
> >>+ * This program is free software; you can redistribute it and/or modify
> >>+ * it under the terms of the GNU General Public License version 2 as
> >>+ * published by the Free Software Foundation.
> >>+ */
> >>+#include <linux/pci.h>
> >>+#include <linux/pci-acpi.h>
> >>+#include <linux/pci-ecam.h>
> >>+
> >>+#define DEBUG0 0x728
> >>+#define PCIE_LTSSM_LINKUP_STATE 0x11
> >>+#define PCIE_LTSSM_STATE_MASK 0x3F
> >
> >These are now unused.
>
> Thanks for pointing that, will delete them.
>
> >
> >>+static const struct acpi_device_id hisi_pcie_rc_res_ids[] = {
> >>+ {"HISI0081", 0},
> >>+ {"", 0},
> >>+};
> >>+
> >>+static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> >>+ int size, u32 *val)
> >>+{
> >>+ struct pci_config_window *cfg = bus->sysdata;
> >>+ int dev = PCI_SLOT(devfn);
> >>+
> >>+ if (bus->number == cfg->busr.start) {
> >>+ /* access only one slot on each root port */
> >>+ if (dev > 0)
> >>+ return PCIBIOS_DEVICE_NOT_FOUND;
> >>+ else
> >>+ return pci_generic_config_read32(bus, devfn, where,
> >>+ size, val);
> >>+ }
> >>+
> >>+ return pci_generic_config_read(bus, devfn, where, size, val);
> >>+}
> >>+
> >>+static int hisi_pcie_acpi_wr_conf(struct pci_bus *bus, u32 devfn,
> >>+ int where, int size, u32 val)
> >>+{
> >>+ struct pci_config_window *cfg = bus->sysdata;
> >>+ int dev = PCI_SLOT(devfn);
> >>+
> >>+ if (bus->number == cfg->busr.start) {
> >>+ /* access only one slot on each root port */
> >>+ if (dev > 0)
> >>+ return PCIBIOS_DEVICE_NOT_FOUND;
> >>+ else
> >>+ return pci_generic_config_write32(bus, devfn, where,
> >>+ size, val);
> >>+ }
> >>+
> >>+ return pci_generic_config_write(bus, devfn, where, size, val);
> >>+}
> >>+
> >>+static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> >>+ int where)
> >>+{
> >>+ struct pci_config_window *cfg = bus->sysdata;
> >>+ void __iomem *reg_base = cfg->priv;
> >>+
> >>+ if (bus->number == cfg->busr.start)
> >>+ return reg_base + where;
> >>+ else
> >>+ return pci_ecam_map_bus(bus, devfn, where);
> >>+}
> >>+
> >>+/*
> >>+ * Retrieve RC base and size from sub-device under the RC
> >>+ * Device (RES1)
> >>+ * {
> >>+ * Name (_HID, "HISI0081")
> >>+ * Name (_CID, "PNP0C02")
> >>+ * Name (_CRS, ResourceTemplate (){
> >>+ * Memory32Fixed (ReadWrite, 0xb0080000, 0x10000)
> >>+ * })
> >>+ * }
> >>+ */
> >>+static int hisi_pcie_rc_addr_get(struct acpi_device *adev,
> >>+ void __iomem **addr)
> >>+{
> >>+ struct acpi_device *child_adev;
> >>+ struct list_head list;
> >>+ struct resource *res;
> >>+ struct resource_entry *entry;
> >>+ unsigned long flags;
> >>+ int ret;
> >>+
> >>+ list_for_each_entry(child_adev, &adev->children, node) {
> >>+ ret = acpi_match_device_ids(child_adev, hisi_pcie_rc_res_ids);
> >>+ if (ret)
> >>+ continue;
> >>+
> >>+ INIT_LIST_HEAD(&list);
> >>+ flags = IORESOURCE_MEM;
> >>+ ret = acpi_dev_get_resources(child_adev, &list,
> >>+ acpi_dev_filter_resource_type_cb,
> >>+ (void *)flags);
> >>+ if (ret < 0) {
> >>+ dev_err(&child_adev->dev,
> >>+ "failed to parse _CRS method, error code %d\n",
> >>+ ret);
> >>+ return ret;
> >>+ } else if (ret == 0) {
> >>+ dev_err(&child_adev->dev,
> >>+ "no IO and memory resources present in _CRS\n");
> >>+ return -EINVAL;
> >>+ }
> >>+
> >>+ entry = list_first_entry(&list, struct resource_entry, node);
> >>+ res = entry->res;
> >>+ *addr = devm_ioremap(&child_adev->dev,
> >>+ res->start, resource_size(res));
> >>+ acpi_dev_free_resource_list(&list);
> >>+ if (IS_ERR(*addr)) {
> >>+ dev_err(&child_adev->dev, "error with ioremap\n");
> >>+ return -ENOMEM;
> >>+ }
> >>+
> >>+ return 0;
> >>+ }
> >>+
> >>+ return -EINVAL;
> >>+}
> >
> >OK, so MCFG (with the possible help of quirks) tells us where *most*
> >of this RC's ECAM space is, but it doesn't tell us where the root bus
> >ECAM space is, which is why we need this block of ugly code. Right?
> Yes, correct.
> >
> >Is there any way we can compute the root bus reg_base from the address
> >we got from MCFG?
>
> No, we can not,because RC base addresses are sequntial and MCFG impose a 4k boundaries.
I understand the "no" part, but not the "because ..." part :)
I think the regions described by MCFG are aligned on 1MB boundaries,
not 4K, because MCFG tells you about ECAM space for a given bus number
range. Each bus can have 256 devices (5 bit device number + 3 bit
function number), and each device has 4K of config space. 256 * 4KB =
1MB.
In any case, it wouldn't have to be a simple function like this:
reg_base = pci_mcfg_lookup(seg, [bus 01]) - 1MB
It could be *anything*, e.g.,
reg_base = 0x00100000 + (bus_num * 4096);
> >Is it a constant that realistically is not going to be modified?
>
> Yes, this is a hardware limitation
If there's only one RC and the address is a constant, maybe you can
just hard-code the address in the .map_bus() function?
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
