On Wed, Oct 19, 2016 at 11:22:03PM +0200, Rafael J. Wysocki wrote: > On Wed, Oct 19, 2016 at 2:41 PM, Mika Westerberg > <mika.westerberg@xxxxxxxxxxxxxxx> wrote: > > On Fri, Sep 23, 2016 at 05:57:05PM +0300, Mika Westerberg wrote: > >> Hi, > >> > >> This series brings couple of useful GPIO related properties from Device > >> Tree to ACPI _DSD device properties: > >> > >> - Names for GPIO lines > >> - GPIO hogging > >> - Holes in GPIO property lists > >> > >> We are using these to get Intel Galileo better supported in the mainline > >> kernel (but these may be useful for other boards as well). For example SPI > >> chip select on Galileo is connected to a GPIO line so we need to be able to > >> describe it in ACPI, and at the same time allow native chip selects. > >> > >> GPIO hogging can be used to set initial state of certain GPIOs available on > >> the headers regardless of the BIOS settings (which may be wrong as it knows > >> nothing about which devices have been connected). > >> > >> Mika Westerberg (5): > >> ACPI / documentation: Use recommended name in GPIO property names > >> ACPI / gpio: Add support for naming GPIOs > >> ACPI / gpio: Add hogging support > >> ACPI / property: Allow holes in reference properties > >> ACPI / gpio: Allow holes in list of GPIOs for a device > > > > Any comments on the GPIO patches in this series? > > > > At least the last one does not add any new bindings so it should be fine > > to apply. > > I have no comments, but I'd suggest resending them as a new series on > top of 4.9-rc1 (which includes the generic patches from this series). > > You can add my ACK to them if that helps. OK, I will do that. Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
