Re: [PATCH v12 0/7] Make cpuid <-> nodeid mapping persistent

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping...

At 09/02/2016 02:57 PM, Dou Liyang wrote:
Ping...

At 08/25/2016 04:35 PM, Dou Liyang wrote:
[Summary]

Use ACPI tables: MADT, DSDT.
1. Create cpuid in order based on Local Apic ID in MADT(apicid).
2. Obtain the nodeid by the proc_id in DSDT.
3. Make the cpuid <-> nodeid mapping persistent.

The mapping relations:

proc_id in DSDT <--> Processor ID in MADT(acpiid) <--> Local Apic ID
in MADT(apicid)
        ^                                                        ^
        |                                                        |
        v                                                        v 
   pxm in DSDT                                                 cpuid
        ^
        |
        v
     nodeid

[Problem]

cpuid <-> nodeid mapping is firstly established at boot time. And
workqueue caches
the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.

When doing node online/offline, cpuid <-> nodeid mapping is
established/destroyed,
which means, cpuid <-> nodeid mapping will change if node hotplug
happens. But
workqueue does not update wq_numa_possible_cpumask.

So here is the problem:

Assume we have the following cpuid <-> nodeid in the beginning:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 2 | 30-44, 90-104
node 3 | 45-59, 105-119

and we hot-remove node2 and node3, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89

and we hot-add node4 and node5, it becomes:

  Node | CPU
------------------------
node 0 |  0-14, 60-74
node 1 | 15-29, 75-89
node 4 | 30-59
node 5 | 90-119

But in wq_numa_possible_cpumask, cpu30 is still mapped to node2, and
the like.

When a pool workqueue is initialized, if its cpumask belongs to a
node, its
pool->node will be mapped to that node. And memory used by this
workqueue will
also be allocated on that node.

static struct worker_pool *get_unbound_pool(const struct
workqueue_attrs *attrs){
...
        /* if cpumask is contained inside a NUMA node, we belong to
that node */
        if (wq_numa_enabled) {
                for_each_node(node) {
                        if (cpumask_subset(pool->attrs->cpumask,

wq_numa_possible_cpumask[node])) {
                                pool->node = node;
                                break;
                        }
                }
        }

Since wq_numa_possible_cpumask is not updated, it could be mapped to
an offline node,
which will lead to memory allocation failure:

 SLUB: Unable to allocate memory on node 2 (gfp=0x80d0)
  cache: kmalloc-192, object size: 192, buffer size: 192, default
order: 1, min order: 0
  node 0: slabs: 6172, objs: 259224, free: 245741
  node 1: slabs: 3261, objs: 136962, free: 127656

It happens here:

create_worker(struct worker_pool *pool)
 |--> worker = alloc_worker(pool->node);

static struct worker *alloc_worker(int node)
{
        struct worker *worker;

        worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, node); -->
Here, useing the wrong node.

        ......

        return worker;
}


[Solution]

There are four mappings in the kernel:
1. nodeid (logical node id)   <->   pxm
2. apicid (physical cpu id)   <->   nodeid
3. cpuid (logical cpu id)     <->   apicid
4. cpuid (logical cpu id)     <->   nodeid

1. pxm (proximity domain) is provided by ACPI firmware in SRAT, and
nodeid <-> pxm
   mapping is setup at boot time. This mapping is persistent, won't
change.

2. apicid <-> nodeid mapping is setup using info in 1. The mapping is
setup at boot
   time and CPU hotadd time, and cleared at CPU hotremove time. This
mapping is also
   persistent.

3. cpuid <-> apicid mapping is setup at boot time and CPU hotadd time.
cpuid is
   allocated, lower ids first, and released at CPU hotremove time,
reused for other
   hotadded CPUs. So this mapping is not persistent.

4. cpuid <-> nodeid mapping is also setup at boot time and CPU hotadd
time, and
   cleared at CPU hotremove time. As a result of 3, this mapping is
not persistent.

To fix this problem, we establish cpuid <-> nodeid mapping for all the
possible
cpus at boot time, and make it persistent. And according to
init_cpu_to_node(),
cpuid <-> nodeid mapping is based on apicid <-> nodeid mapping and
cpuid <-> apicid
mapping. So the key point is obtaining all cpus' apicid.

apicid can be obtained by _MAT (Multiple APIC Table Entry) method or
found in
MADT (Multiple APIC Description Table). So we finish the job in the
following steps:

1. Enable apic registeration flow to handle both enabled and disabled
cpus.
   This is done by introducing an extra parameter to
generic_processor_info to let the
   caller control if disabled cpus are ignored.

2. Introduce a new array storing all possible cpuid <-> apicid
mapping. And also modify
   the way cpuid is calculated. Establish all possible cpuid <->
apicid mapping when
   registering local apic. Store the mapping in this array.

3. Enable _MAT and MADT relative apis to return non-presnet or
disabled cpus' apicid.
   This is also done by introducing an extra parameter to these apis
to let the caller
   control if disabled cpus are ignored.

4. Establish all possible cpuid <-> nodeid mapping.
   This is done via an additional acpi namespace walk for processors.


For previous discussion, please refer to:
https://lkml.org/lkml/2015/2/27/145
https://lkml.org/lkml/2015/3/25/989
https://lkml.org/lkml/2015/5/14/244
https://lkml.org/lkml/2015/7/7/200
https://lkml.org/lkml/2015/9/27/209
https://lkml.org/lkml/2016/5/19/212
https://lkml.org/lkml/2016/7/19/181
https://lkml.org/lkml/2016/7/25/99
https://lkml.org/lkml/2016/7/26/52
https://lkml.org/lkml/2016/8/8/96

Change log v11 -> v12:
1. Rebase
2. Add a short summary

Change log v10 -> v11:
1. Reduce the number of repeat judgment of online/offline
2. Seperate out the functionality in the enable or disable situation

Change log v9 -> v10:
1. Providing an empty definition of acpi_set_processor_mapping() for
CONFIG_ACPI_HOTPLUG_CPU unset. In patch 5.
2. Fix auto build test ERROR on ia64/next. In patch 5.
3. Fix some comment.

Change log v8 -> v9:
1. Providing an empty definition of acpi_set_processor_mapping() for
CONFIG_ACPI_HOTPLUG_CPU unset.

Change log v7 -> v8:
1. Provide the mechanism to validate processors in the ACPI tables.
2. Provide the interface to validate the proc_id when setting the
mapping.

Change log v6 -> v7:
1. Fix arm64 build failure.

Change log v5 -> v6:
1. Define func acpi_map_cpu2node() for x86 and ia64 respectively.

Change log v4 -> v5:
1. Remove useless code in patch 1.
2. Small improvement of commit message.

Change log v3 -> v4:
1. Fix the kernel panic at boot time. The cause is that I tried to
build zonelists
   before per cpu areas were initialized.

Change log v2 -> v3:
1. Online memory-less nodes at boot time to map cpus of memory-less
nodes.
2. Build zonelists for memory-less nodes so that memory allocator will
fall
   back to proper nodes automatically.

Change log v1 -> v2:
1. Split code movement and actual changes. Add patch 1.
2. Synchronize best near online node record when node hotplug happens.
In patch 2.
3. Fix some comment.

Dou Liyang (2):
  acpi: Provide the mechanism to validate processors in the ACPI tables
  acpi: Provide the interface to validate the proc_id

Gu Zheng (4):
  x86, acpi, cpu-hotplug: Enable acpi to register all possible cpus at
    boot time.
  x86, acpi, cpu-hotplug: Introduce cpuid_to_apicid[] array to store
    persistent cpuid <-> apicid mapping.
  x86, acpi, cpu-hotplug: Enable MADT APIs to return disabled apicid.
  x86, acpi, cpu-hotplug: Set persistent cpuid <-> nodeid mapping when
    booting.

Tang Chen (1):
  x86, memhp, numa: Online memory-less nodes at boot time.

 arch/ia64/kernel/acpi.c       |   3 +-
 arch/x86/include/asm/mpspec.h |   1 +
 arch/x86/kernel/acpi/boot.c   |  11 ++--
 arch/x86/kernel/apic/apic.c   |  77 +++++++++++++++++++++++--
 arch/x86/mm/numa.c            |  27 +++++----
 drivers/acpi/acpi_processor.c | 105 ++++++++++++++++++++++++++++++++-
 drivers/acpi/bus.c            |   1 +
 drivers/acpi/processor_core.c | 131
+++++++++++++++++++++++++++++++++++-------
 include/linux/acpi.h          |   6 ++
 9 files changed, 311 insertions(+), 51 deletions(-)





--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux