Hi,
On Wed, Aug 31, 2016 at 11:29:11AM +0800, Kefeng Wang wrote:
> Make dw8250_set_termios() handle all cases of dw8250_data->clk properly,
> then we can safely use dw8250_set_termios() as the default set_termios
> callback instead of serial8250_do_set_termios(), so do it.
>
> Signed-off-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>
> ---
> drivers/tty/serial/8250/8250_dw.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 5c0c123..adecece 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -235,7 +235,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
> unsigned int rate;
> int ret;
>
> - if (IS_ERR(d->clk) || !old)
> + if (IS_ERR_OR_NULL(d->clk) || !old)
> goto out;
This part is fine, but...
> clk_disable_unprepare(d->clk);
> @@ -308,13 +308,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
> p->serial_in = dw8250_serial_in32;
> data->uart_16550_compatible = true;
> }
> - p->set_termios = dw8250_set_termios;
> }
>
> /* Platforms with iDMA */
> if (platform_get_resource_byname(to_platform_device(p->dev),
> IORESOURCE_MEM, "lpss_priv")) {
> - p->set_termios = dw8250_set_termios;
> data->dma.rx_param = p->dev->parent;
> data->dma.tx_param = p->dev->parent;
> data->dma.fn = dw8250_idma_filter;
> @@ -391,6 +389,7 @@ static int dw8250_probe(struct platform_device *pdev)
> p->iotype = UPIO_MEM;
> p->serial_in = dw8250_serial_in;
> p->serial_out = dw8250_serial_out;
> + p->set_termios = dw8250_set_termios;
I'm a bit worried about this. If I remember correctly, we didn't set
the set_termios hook by default in the past because somebody was using
a type of clk that can't handle rate rounding and ended up using
improper clock frequency for some baud rates. Unfortunately I can't
remember who had that problem and on which platform.
On the other hand, I'm not sure if drivers should worry about things
like that. This should be done the other way around. The platform
with the problem should unset the p->set_termios hook in a quirk, but
by default everybody would use dw8250_set_termios.
Thanks,
--
heikki
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
