The UART driver, dw8250.c, needs some details regarding the
Designware UART. For ACPI enumerated devices the values are
hard-coded, but since the driver also reads the values from
device properties, providing them with build-in properties.
This allows us to later remove the hard-coded values from
the driver.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Acked-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
---
drivers/acpi/acpi_lpss.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 357a0b8..5520102 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -75,6 +75,7 @@ struct lpss_device_desc {
const char *clk_con_id;
unsigned int prv_offset;
size_t prv_size_override;
+ struct property_entry *properties;
void (*setup)(struct lpss_private_data *pdata);
};
@@ -163,11 +164,19 @@ static const struct lpss_device_desc lpt_i2c_dev_desc = {
.prv_offset = 0x800,
};
+static struct property_entry uart_properties[] = {
+ PROPERTY_ENTRY_U32("reg-io-width", 4),
+ PROPERTY_ENTRY_U32("reg-shift", 2),
+ PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
+ { },
+};
+
static const struct lpss_device_desc lpt_uart_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
+ .properties = uart_properties,
};
static const struct lpss_device_desc lpt_sdio_dev_desc = {
@@ -189,6 +198,7 @@ static const struct lpss_device_desc byt_uart_dev_desc = {
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
+ .properties = uart_properties,
};
static const struct lpss_device_desc bsw_uart_dev_desc = {
@@ -197,6 +207,7 @@ static const struct lpss_device_desc bsw_uart_dev_desc = {
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
+ .properties = uart_properties,
};
static const struct lpss_device_desc byt_spi_dev_desc = {
@@ -440,6 +451,12 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
goto err_out;
}
+ if (dev_desc->properties) {
+ ret = device_add_properties(&adev->dev, dev_desc->properties);
+ if (ret)
+ goto err_out;
+ }
+
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev);
if (!IS_ERR_OR_NULL(pdev)) {
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
