Re: [RFC PATCH v3 13/13] drivers: acpi: iort: introduce iort_iommu_configure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2016-07-20 07:23, Lorenzo Pieralisi wrote:
DT based systems have a generic kernel API to configure IOMMUs
for devices (ie of_iommu_configure()).

On ARM based ACPI systems, the of_iommu_configure() equivalent can
be implemented atop ACPI IORT kernel API, with the corresponding
functions to map device identifiers to IOMMUs and retrieve the
corresponding IOMMU operations necessary for DMA operations set-up.

By relying on the iommu_fwspec generic kernel infrastructure,
implement the IORT based IOMMU configuration for ARM ACPI systems
and hook it up in the ACPI kernel layer that implements DMA
configuration for a device.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
Cc: Tomasz Nowicki <tn@xxxxxxxxxxxx>
Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
---
drivers/acpi/iort.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/acpi/scan.c  |  7 +++++-
 include/linux/iort.h |  4 ++++
 3 files changed, 74 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c
index c116b68..a12a4ff 100644
--- a/drivers/acpi/iort.c
+++ b/drivers/acpi/iort.c
@@ -18,6 +18,7 @@

 #define pr_fmt(fmt)	"ACPI: IORT: " fmt

+#include <linux/iommu-fwspec.h>
 #include <linux/iort.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -27,6 +28,8 @@

 #define IORT_TYPE_MASK(type)	(1 << (type))
 #define IORT_MSI_TYPE		(1 << ACPI_IORT_NODE_ITS_GROUP)
+#define IORT_IOMMU_TYPE		((1 << ACPI_IORT_NODE_SMMU) |	\
+				(1 << ACPI_IORT_NODE_SMMU_V3))

 struct iort_its_msi_chip {
 	struct list_head	list;
@@ -458,6 +461,67 @@ iort_get_device_domain(struct device *dev, u32 req_id)
 	return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
 }

+static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
+{
+	u32 *rid = data;
+
+	*rid = alias;
+	return 0;
+}
+
+static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
+			       struct fwnode_handle *fwnode)
+{
+	int ret = iommu_fwspec_init(dev, fwnode);
+
+	if (!ret)
+		ret = iommu_fwspec_add_ids(dev, &streamid, 1);
+
+	return 0;

Are you intentionally returning 0 instead of ret? How about doing this instead?

	return ret ? ret : iommu_fwspec_add_ids(dev, &streamid, 1);

+}
+
+/**
+ * iort_iommu_configure - Set-up IOMMU configuration for a device.
+ *
+ * @dev: device to configure
+ *
+ * Returns: iommu_ops pointer on configuration success
+ *          NULL on configuration failure
+ */
+const struct iommu_ops *iort_iommu_configure(struct device *dev)
+{
+	struct acpi_iort_node *node, *parent;
+	struct fwnode_handle *iort_fwnode;
+	u32 rid = 0, devid = 0;

Since this routine maps the RID space of a device to the StreamID space of its parent smmu, would you consider renaming the devid variable to some form of sid
or streamid?

+
+	if (dev_is_pci(dev)) {
+		struct pci_bus *bus = to_pci_dev(dev)->bus;
+
+		pci_for_each_dma_alias(to_pci_dev(dev), __get_pci_rid,
+				       &rid);
+
+		node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
+				      iort_match_node_callback, &bus->dev);
+	} else {
+		node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
+				      iort_match_node_callback, dev);
+	}
+
+	if (!node)
+		return NULL;
+
+	parent = iort_node_map_rid(node, rid, &devid, IORT_IOMMU_TYPE);
+	if (parent) {
+		iort_fwnode = iort_get_fwnode(parent);
+		if (iort_fwnode) {
+			arm_smmu_iort_xlate(dev, devid, iort_fwnode);

What about named components with multiple stream ids? Since establishing the relationship between a named component and its parent smmu is already dependent on there being an appropriate mapping of rid 0, it stands to reason that all of the stream ids for a named component could be enumerated by mapping increasing rid values until the output parent no longer matches that returned for rid 0.

+			return fwspec_iommu_get_ops(iort_fwnode);
+		}
+	}
+
+	return NULL;
+}

It should be noted that while trying out the approach described above, I noticed that each of the smmu attached named components described in my iort were ending up with an extra stream id. The culprit appears to be that the range checking in iort_id_map() is overly permissive on the upper bounds. For example, mappings with input_base=N and id_count=1 were matching both N and N+1. The following
change fixed the issue.

@@ -296,7 +296,7 @@ iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in, u32 *rid_out)
        }

        if (rid_in < map->input_base ||
-           (rid_in > map->input_base + map->id_count))
+           (rid_in >= map->input_base + map->id_count))
                return -ENXIO;

        *rid_out = map->output_base + (rid_in - map->input_base);

+
 static void acpi_smmu_v3_register_irq(int hwirq, const char *name,
 				      struct resource *res)
 {
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b4b9064..de28825 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -7,6 +7,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/acpi.h>
+#include <linux/iort.h>
 #include <linux/signal.h>
 #include <linux/kthread.h>
 #include <linux/dmi.h>
@@ -1365,11 +1366,15 @@ enum dev_dma_attr acpi_get_dma_attr(struct
acpi_device *adev)
  */
 void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
 {
+	const struct iommu_ops *iommu;
+
+	iommu = iort_iommu_configure(dev);
+
 	/*
 	 * Assume dma valid range starts at 0 and covers the whole
 	 * coherent_dma_mask.
 	 */
-	arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL,
+	arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, iommu,
 			   attr == DEV_DMA_COHERENT);

If dev has a matching named component iort entry with a non-zero value for memory_address_limit, why not use that as the size input to arch_setup_dma_ops?

 }

diff --git a/include/linux/iort.h b/include/linux/iort.h
index 18e6836..bbe08ef 100644
--- a/include/linux/iort.h
+++ b/include/linux/iort.h
@@ -34,6 +34,8 @@ struct irq_domain *iort_get_device_domain(struct
device *dev, u32 req_id);
 /* IOMMU interface */
 int iort_add_smmu_platform_device(struct fwnode_handle *fwnode,
 				  struct acpi_iort_node *node);
+
+const struct iommu_ops *iort_iommu_configure(struct device *dev);
 #else
 static inline bool iort_node_match(u8 type) { return false; }
 static inline void iort_table_detect(void) { }
@@ -48,6 +50,8 @@ iort_add_smmu_platform_device(struct fwnode_handle *fwnode,
 {
 	return -ENODEV;
 }
+static inline const struct iommu_ops *
+iort_iommu_configure(struct device *dev) { return NULL; }
 #endif

 #define IORT_ACPI_DECLARE(name, table_id, fn)		\

--
Qualcomm Datacenter Technologies, Inc. on behalf of Qualcomm Technologies, Inc. Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux