The "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/ http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf defines the layout of the block window status register. For the July 2016 version of the spec linked to above, this happens in Figure 4 on page 26. The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The rest of the bits in the status register are reserved, and there is a warning following the diagram that says: Note: The driver cannot assume the value of the RESERVED bits in the status register are zero. These reserved bits need to be masked off, and the driver must avoid checking the state of those bits. This change ensures that for hardware implementations that set these reserved bits in the status register, the driver won't incorrectly fail the block I/Os. Signed-off-by: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx> Cc: Dan Williams <dan.j.williams@xxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- drivers/acpi/nfit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index 1f0e060..375c10f 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -1396,11 +1396,12 @@ static u32 read_blk_stat(struct nfit_blk *nfit_blk, unsigned int bw) { struct nfit_blk_mmio *mmio = &nfit_blk->mmio[DCR]; u64 offset = nfit_blk->stat_offset + mmio->size * bw; + const u32 STATUS_MASK = 0x80000037; if (mmio->num_lines) offset = to_interleave_offset(offset, mmio); - return readl(mmio->addr.base + offset); + return readl(mmio->addr.base + offset) & STATUS_MASK; } static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw, -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
