Hi,
On Tue, Jul 12, 2016 at 12:17 PM, Lv Zheng <lv.zheng@xxxxxxxxx> wrote:
> There are many AML tables reporting wrong initial lid state, and some of
> them never reports lid open state. As a proxy layer acting between, ACPI
> button driver is not able to handle all such cases, but need to re-define
> the usage model of the ACPI lid. That is:
> 1. It's initial state is not reliable;
> 2. There may not be an open event;
> 3. Userspace should only take action against the close event which is
> reliable, always sent after a real lid close.
> This patch adds a new input key event so that the new userspace programs
> can use it to handle this usage model correctly. And in the meanwhile, no
> old programs will be broken by the userspace changes.
> This patch also adds a button.lid_event_type parameter to allow the users
> to switch between the 2 event types.
I think we are getting closer to what would be acceptable for
user-space, but I still have a few comments:
>
> Signed-off-by: Lv Zheng <lv.zheng@xxxxxxxxx>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
> Cc: Bastien Nocera: <hadess@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx
> ---
> drivers/acpi/button.c | 109 +++++++++++++++++++++++++-------
> include/uapi/linux/input-event-codes.h | 6 ++
> 2 files changed, 91 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
> index 148f4e5..1298ef8 100644
> --- a/drivers/acpi/button.c
> +++ b/drivers/acpi/button.c
> @@ -57,6 +57,9 @@
> #define ACPI_BUTTON_LID_INIT_OPEN 0x01
> #define ACPI_BUTTON_LID_INIT_METHOD 0x02
>
> +#define ACPI_BUTTON_LID_EVENT_KEY 0x00
> +#define ACPI_BUTTON_LID_EVENT_SWITCH 0x01
> +
> #define _COMPONENT ACPI_BUTTON_COMPONENT
> ACPI_MODULE_NAME("button");
>
> @@ -110,6 +113,7 @@ struct acpi_button {
> static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
> static struct acpi_device *lid_device;
> static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> +static u8 lid_event_type = ACPI_BUTTON_LID_EVENT_SWITCH;
>
> /* --------------------------------------------------------------------------
> FS Interface (/proc)
> @@ -136,8 +140,17 @@ static int acpi_lid_notify_state(struct acpi_device *device, int state)
> int ret;
>
> /* input layer checks if event is redundant */
> - input_report_switch(button->input, SW_LID, !state);
> - input_sync(button->input);
> + if (lid_event_type == ACPI_BUTTON_LID_EVENT_SWITCH) {
> + input_report_switch(button->input, SW_LID, !state);
> + input_sync(button->input);
> + }
> + if (lid_event_type == ACPI_BUTTON_LID_EVENT_KEY &&
> + !state) {
> + input_report_key(button->input, KEY_LID_CLOSE, 1);
> + input_sync(button->input);
> + input_report_key(button->input, KEY_LID_CLOSE, 0);
> + input_sync(button->input);
> + }
>
> if (state)
> pm_wakeup_event(&device->dev, 0);
> @@ -292,6 +305,9 @@ static int acpi_lid_update_state(struct acpi_device *device)
>
> static void acpi_lid_initialize_state(struct acpi_device *device)
> {
> + if (lid_event_type == ACPI_BUTTON_LID_EVENT_KEY)
> + return;
> +
> switch (lid_init_state) {
> case ACPI_BUTTON_LID_INIT_OPEN:
> (void)acpi_lid_notify_state(device, 1);
> @@ -436,6 +452,7 @@ static int acpi_button_add(struct acpi_device *device)
>
> case ACPI_BUTTON_TYPE_LID:
> input_set_capability(input, EV_SW, SW_LID);
> + input_set_capability(input, EV_KEY, KEY_LID_CLOSE);
Here you are basically exporting the 2 input events but only update
one of the 2. It will confuse userspace and it is generally better not
to export unused input codes.
However, as I'll say below, I think we should keep the code that way here.
> break;
> }
>
> @@ -475,35 +492,49 @@ static int acpi_button_remove(struct acpi_device *device)
>
> static int param_set_lid_init_state(const char *val, struct kernel_param *kp)
> {
> - int result = 0;
> -
> - if (!strncmp(val, "open", sizeof("open") - 1)) {
> - lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> - pr_info("Notify initial lid state as open\n");
> - } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> - lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> - pr_info("Notify initial lid state with _LID return value\n");
> - } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> - lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> - pr_info("Do not notify initial lid state\n");
> - } else
> - result = -EINVAL;
> + int result = -EINVAL;
> +
> + switch (lid_event_type) {
> + case ACPI_BUTTON_LID_EVENT_KEY:
> + if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> + lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> + pr_info("Do not notify initial lid state\n");
> + }
> + break;
> + case ACPI_BUTTON_LID_EVENT_SWITCH:
> + if (!strncmp(val, "open", sizeof("open") - 1)) {
> + lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
> + pr_info("Notify initial lid state as open\n");
> + } else if (!strncmp(val, "method", sizeof("method") - 1)) {
> + lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
> + pr_info("Notify initial lid state"
> + " with _LID return value\n");
> + } else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
> + lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
> + pr_info("Do not notify initial lid state\n");
> + }
> + break;
> + }
> return result;
> }
>
> static int param_get_lid_init_state(char *buffer, struct kernel_param *kp)
> {
> - switch (lid_init_state) {
> - case ACPI_BUTTON_LID_INIT_OPEN:
> - return sprintf(buffer, "open");
> - case ACPI_BUTTON_LID_INIT_METHOD:
> - return sprintf(buffer, "method");
> - case ACPI_BUTTON_LID_INIT_IGNORE:
> + switch (lid_event_type) {
> + case ACPI_BUTTON_LID_EVENT_KEY:
> return sprintf(buffer, "ignore");
> - default:
> - return sprintf(buffer, "invalid");
> + case ACPI_BUTTON_LID_EVENT_SWITCH:
> + switch (lid_init_state) {
> + case ACPI_BUTTON_LID_INIT_OPEN:
> + return sprintf(buffer, "open");
> + case ACPI_BUTTON_LID_INIT_METHOD:
> + return sprintf(buffer, "method");
> + case ACPI_BUTTON_LID_INIT_IGNORE:
> + return sprintf(buffer, "ignore");
> + }
> + break;
> }
> - return 0;
> + return sprintf(buffer, "invalid");
> }
>
> module_param_call(lid_init_state,
> @@ -511,4 +542,34 @@ module_param_call(lid_init_state,
> NULL, 0644);
> MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");
>
> +static int param_set_lid_event_type(const char *val, struct kernel_param *kp)
> +{
> + int result = -EINVAL;
> +
> + if (!strncmp(val, "key", sizeof("key") - 1)) {
> + lid_event_type = ACPI_BUTTON_LID_EVENT_KEY;
> + pr_info("Notify lid state using key event\n");
> + } else if (!strncmp(val, "switch", sizeof("switch") - 1)) {
> + lid_event_type = ACPI_BUTTON_LID_EVENT_SWITCH;
> + pr_info("Notify lid state using switch event\n");
> + }
> + return result;
> +}
> +
> +static int param_get_lid_event_type(char *buffer, struct kernel_param *kp)
> +{
> + switch (lid_event_type) {
> + case ACPI_BUTTON_LID_EVENT_KEY:
> + return sprintf(buffer, "key");
> + case ACPI_BUTTON_LID_EVENT_SWITCH:
> + return sprintf(buffer, "switch");
> + }
> + return sprintf(buffer, "invalid");
> +}
> +
> +module_param_call(lid_event_type,
> + param_set_lid_event_type, param_get_lid_event_type,
> + NULL, 0644);
> +MODULE_PARM_DESC(lid_event_type, "Event type for reporting LID state");
I don't think this is a good solution to have a kernel parameter. I
thought the final decision were to have userspace decide which event
was valid, and so we just need to export and emit both of events.
_If_ you export a kernel parameter, it makes sense to have a dmi
blacklist to have a good default experience, which is what you wanted
to avoid.
So if you just export and use both events at the same time, you will have:
- correct ACPI machines will just have an extra KEY_LID_CLOSE event
emitted, which will not harm logind
- wrong ACPI machines will not have their SW_LID input event updated
because it will be kept closed. But given that logind will ignore it,
there is no harm either
As Dmitry said, we could also have a KEY_LID_OPEN emitted for
symmetrical purposes, but I am not entirely sure if this will confuse
userspace or not. On the other hand, there are few users of these
states, and we can teach them how to properly use them.
So in the end, I think you should just get rid of the kernel
parameter, export SW_LID, KEY_LID_CLOSE, KEY_LID_OPEN in the event
node, and only add the KEY_LID_CLOSE|OPEN events on an actual acpi
notification.
Then a small hwdb entry set will teach logind/powerd if they need to
ignore the SW_LID event or not.
Cheers,
Benjamin
> +
> module_acpi_driver(acpi_button_driver);
> diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
> index 737fa32..df7c0c0 100644
> --- a/include/uapi/linux/input-event-codes.h
> +++ b/include/uapi/linux/input-event-codes.h
> @@ -641,6 +641,12 @@
> * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
> */
> #define KEY_DATA 0x275
> +/*
> + * Special event sent by the lid drivers. The drivers may not be able to
> + * issue "open" event, in which case, they send KEY_LID_CLOSE instead of
> + * SW_LID.
> + */
> +#define KEY_LID_CLOSE 0x278
>
> #define BTN_TRIGGER_HAPPY 0x2c0
> #define BTN_TRIGGER_HAPPY1 0x2c0
> --
> 1.7.10
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
