(cc'ing ACPI folks and retaining message body for context) On Tue, Jul 05, 2016 at 11:01:53AM +0530, Navin P.S wrote: > On Mon, Jul 4, 2016 at 8:55 PM, Kevin Brubeck Unhammer > <unhammer@xxxxxxxx> wrote: > > > > Hi again, > > > > Navin found a workaround: acpi=noirq (and pci=noacpi) lets me boot with > > the newer kernels. > > > > Attached are dmesg's from 4.7rc2 and 4.7rc5 from > > http://kernel.ubuntu.com/~kernel-ppa/mainline/ (rc5 complained about > > missing noveau firmware; I haven't tried the newest linux-firmware > > package yet, but haven't yet seen anything *not* working in rc5 that was > > working in rc2). > > > > > > Other changes when using acpi=noirq that may or may not be relevant: > > The computer will now poweroff when I do a shutdown, and restarts > > correctly (it used to just "hang" at the end of the shutdown sequence), > > and a bluetooth device shows up that I didn't know I had. However, > > although I seem to be able to suspend, I can't resume (no response when > > hitting power button). All in all an improvement though … > > > > > > > > best regards, > > Kevin Brubeck Unhammer > > > > > > > > "Navin P.S" <navinp1912@xxxxxxxxx> čálii: > > > > > On Mon, Jun 6, 2016 at 1:01 PM, Kevin Brubeck Unhammer > > > <unhammer@xxxxxxxx> wrote: > > >> Hi, > > >> > > >> I have a Lenovo A740 (running Xubuntu 16.04) which, with kernel > > >> versions >= 4.3.0, tested up until 4.7.0, gives this on trying to boot: > > >> > > >> Begin: Waiting for root file system ... Begin: Running > > >> /scripts/local-block ... done. > > >> Begin: Running /scripts/local-block ... done. > > >> Begin: Running /scripts/local-block ... done. > > >> […] > > >> done. > > >> Gave up waiting for root device. > > >> > > >> and drops me into an (initramfs) shell, where my keyboard is > > >> unresponsive. The last kernel I tried which booted fine was 4.2.8. > > >> > > >> I reported this at https://bugzilla.kernel.org/show_bug.cgi?id=118401 > > >> and, after some investigation, was asked to contact ahci.c - AHCI SATA > > >> support. The attachments in that report show some output from initramfs > > >> (using a script in /etc/initramfs-tools/scripts/init-premount due to the > > >> keyboard not working). > > >> > > >> What should I do to keep debugging this issue? > > >> > > > > > > I have been working with Kevin on the bug 118401 . > > > > > > I'll post the summary. > > > The kernel 4.2 works and he is able to boot the system. > > > Kernel 4.4 and 4.6, 4.7 drops into initramfs shell for the same uuid. > > > Upon further investigation cat /proc/devices showed no block devices > > > other than zram and loop.The command /sbin/blkid on 4.6 and later > > > didn't give any output whereas on 4.2 it does. > > > > > > Kernel 4.2 shows the ahci used count is 3 > > > ahci 36864 3 - Live 0x0000000000000000 > > > libahci 32768 1 ahci, Live 0x0000000000000000 > > > > > > Where kernel 4.7 doesn't load the ahci module upon boot and upon > > > modprobe ahci from the initramfs shell it shows the ahci count as 0. > > > So it is not detecting the drive. Not sure why ? > > > > > > Some more things to note from 4.2 dmesg it prints not sure if it is relevant. > > > > > > [ 0.716610] ahci 0000:00:1f.2: version 3.0 > > > [ 0.716620] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; > > > probably buggy MP table > > > > > > [ 0.735267] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 > > > Gbps 0x1 impl SATA mode > > > > > > [ 0.746033] ata1: SATA max UDMA/133 abar m2048@0xb5618000 port > > > 0xb5618100 irq 44 > > > > > > [ 1.068001] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > > > > > > [ 1.134029] ata1.00: ATA-8: ST1000LM014-1EJ164-SSHD-8GB, LIV6, max UDMA/133 > > > [ 1.134030] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > > > [ 1.178470] ata1.00: configured for UDMA/133 > > > [ 1.178620] scsi 0:0:0:0: Direct-Access ATA > > > ST1000LM014-1EJ1 LIV6 PQ: 0 ANSI: 5 > > > [ 1.178853] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: > > > (1.00 TB/931 GiB) > > > [ 1.178855] sd 0:0:0:0: [sda] 4096-byte physical blocks > > > [ 1.178879] sd 0:0:0:0: [sda] Write Protect is off > > > [ 1.178881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > > > > > > > > where as 4.6 and later doesn't print these messages.dmesg | grep > > > ata[0-4] gives no output. > > > > > > lspci on 4.2 gives this > > > > > > 00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 > > > [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) > > > Subsystem: Lenovo 8 Series SATA Controller 1 [AHCI mode] > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > > > Stepping- SERR- FastB2B- DisINTx+ > > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > > > <TAbort- <MAbort- >SERR- <PERR- INTx- > > > Latency: 0 > > > Interrupt: pin B routed to IRQ 44 > > > Region 0: I/O ports at 6088 [size=8] > > > Region 1: I/O ports at 6094 [size=4] > > > Region 2: I/O ports at 6080 [size=8] > > > Region 3: I/O ports at 6090 [size=4] > > > Region 4: I/O ports at 6060 [size=32] > > > Region 5: Memory at b5618000 (32-bit, non-prefetchable) [size=2K] > > > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > > > Address: fee0400c Data: 4181 > > > Capabilities: [70] Power Management version 3 > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > > Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 > > > Kernel driver in use: ahci > > > Kernel modules: ahci > > > Hi, > > The default kernel parametes doesn't detect disk whereas when you > pass kernel command line (acpi=noirq or pci=noacpi) the disk is > detected and the machine is usable. > Should this be forwarded to linux-acpi list ? > > This machine was usuable without any arguments like acpi=noirq and > pci=noacpi in 4.2 . > > What does this usually indicate buggy bios ? > > I can see some parse execution error in dmesg attached. Yeah, looks like an IRQ routing problem. cc'd ACPI folks. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
