+ Prashanth (Can you please have a look as well?)
On 31 May 2016 at 15:35, Hoan Tran <hotran@xxxxxxx> wrote:
> Hi Ashwin,
Hi,
Sorry about the delay. I'm in the middle of switching jobs and
locations, so its been a bit crazy lately. I dont have any major
concerns with this code, although there could be subtle issues with
this IRQ thing. In this patchset, your intent is to add support for
PCC subspace type 2. But you're also adding support for tx command
completion which is not specific to Type 2. We could support that even
in Type 1. Hence I wanted to separate the two, not just for review,
but also the async IRQ completion has subtle issues esp. in the case
of async platform notification, where you could have a PCC client in
the OS writing to the cmd bit and the platform sending an async
notification by writing to some bits in the same 8byte address as the
cmd bit. So we need some mutual exclusivity there, otherwise the OS
and platform could step on each other. Perhaps Prashanth has better
insight into this.
>
> On Tue, May 31, 2016 at 12:05 PM, Ashwin Chaugule
> <ashwin.chaugule@xxxxxxxxxx> wrote:
>> On 19 May 2016 at 20:32, Hoan Tran <hotran@xxxxxxx> wrote:
>>> ACPI 6.1 has a PCC HW-Reduced Communication Subspace type 2 intended for
>>> use on HW-Reduce ACPI Platform, which requires read-modify-write sequence
>>> to acknowledge doorbell interrupt. This patch provides the implementation
>>> for the Communication Subspace Type 2.
>>>
>>> v3
>>> * Remove 2 global structures
>>> * Correct parsing subspace type 1 and subspace type 2
>>>
>>> v2
>>> * Remove changes inside "actbl3.h". This file is taken care by ACPICA.
>>> * Parse both subspace type 1 and subspace type 2
>>> * Remove unnecessary variable initialization
>>> * ISR returns IRQ_NONE in case of error
>>>
>>> v1
>>> * Initial
>>>
>>> Signed-off-by: Hoan Tran <hotran@xxxxxxx>
>>> ---
>>> drivers/mailbox/pcc.c | 316 ++++++++++++++++++++++++++++++++++++++------------
>>> 1 file changed, 245 insertions(+), 71 deletions(-)
>>>
>>> diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
>>> index 043828d..c98bd94 100644
>>> --- a/drivers/mailbox/pcc.c
>>> +++ b/drivers/mailbox/pcc.c
>>> @@ -59,6 +59,7 @@
>>> #include <linux/delay.h>
>>> #include <linux/io.h>
>>> #include <linux/init.h>
>>> +#include <linux/interrupt.h>
>>> #include <linux/list.h>
>>> #include <linux/platform_device.h>
>>> #include <linux/mailbox_controller.h>
>>> @@ -68,11 +69,16 @@
>>> #include "mailbox.h"
>>>
>>> #define MAX_PCC_SUBSPACES 256
>>> +#define MBOX_IRQ_NAME "pcc-mbox"
>>>
>>> static struct mbox_chan *pcc_mbox_channels;
>>>
>>> /* Array of cached virtual address for doorbell registers */
>>> static void __iomem **pcc_doorbell_vaddr;
>>> +/* Array of cached virtual address for doorbell ack registers */
>>> +static void __iomem **pcc_doorbell_ack_vaddr;
>>> +/* Array of doorbell interrupts */
>>> +static int *pcc_doorbell_irq;
>>>
>>> static struct mbox_controller pcc_mbox_ctrl = {};
>>> /**
>>> @@ -91,6 +97,132 @@ static struct mbox_chan *get_pcc_channel(int id)
>>> return &pcc_mbox_channels[id];
>>> }
>>>
>>> +/*
>>> + * PCC can be used with perf critical drivers such as CPPC
>>> + * So it makes sense to locally cache the virtual address and
>>> + * use it to read/write to PCC registers such as doorbell register
>>> + *
>>> + * The below read_register and write_registers are used to read and
>>> + * write from perf critical registers such as PCC doorbell register
>>> + */
>>> +static int read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width)
>>> +{
>>> + int ret_val = 0;
>>> +
>>> + switch (bit_width) {
>>> + case 8:
>>> + *val = readb(vaddr);
>>> + break;
>>> + case 16:
>>> + *val = readw(vaddr);
>>> + break;
>>> + case 32:
>>> + *val = readl(vaddr);
>>> + break;
>>> + case 64:
>>> + *val = readq(vaddr);
>>> + break;
>>> + default:
>>> + pr_debug("Error: Cannot read register of %u bit width",
>>> + bit_width);
>>> + ret_val = -EFAULT;
>>> + break;
>>> + }
>>> + return ret_val;
>>> +}
>>> +
>>> +static int write_register(void __iomem *vaddr, u64 val, unsigned int bit_width)
>>> +{
>>> + int ret_val = 0;
>>> +
>>> + switch (bit_width) {
>>> + case 8:
>>> + writeb(val, vaddr);
>>> + break;
>>> + case 16:
>>> + writew(val, vaddr);
>>> + break;
>>> + case 32:
>>> + writel(val, vaddr);
>>> + break;
>>> + case 64:
>>> + writeq(val, vaddr);
>>> + break;
>>> + default:
>>> + pr_debug("Error: Cannot write register of %u bit width",
>>> + bit_width);
>>> + ret_val = -EFAULT;
>>> + break;
>>> + }
>>> + return ret_val;
>>> +}
>>> +
>>
>> Isn't this just reordering of function locations? I don't mean to be
>> nitpicky, but your cosmetic changes in this file make it harder to
>> review the meat of the patch.
>
> Yes, it is. As I would like to call these functions but actually, they
> are declared quite late.
> Do you have a any suggestion? Thanks
>
No this is fine. I missed the place where you needed to call these.
>>
>>> +/**
>>> + * pcc_map_interrupt - Map a PCC subspace GSI to a linux IRQ number
>>> + * @interrupt: GSI number.
>>> + * @flags: interrupt flags
>>> + *
>>> + * Returns: a valid linux IRQ number on success
>>> + * 0 or -EINVAL on failure
>>> + */
>>> +static int pcc_map_interrupt(u32 interrupt, u32 flags)
>>> +{
>>> + int trigger, polarity;
>>> +
>>> + if (!interrupt)
>>> + return 0;
>>> +
>>> + trigger = (flags & ACPI_PCCT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
>>> + : ACPI_LEVEL_SENSITIVE;
>>> +
>>> + polarity = (flags & ACPI_PCCT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
>>> + : ACPI_ACTIVE_HIGH;
>>> +
>>> + return acpi_register_gsi(NULL, interrupt, trigger, polarity);
>>> +}
>>> +
>>> +/**
>>> + * pcc_mbox_irq - PCC mailbox interrupt handler
>>> + */
>>> +static irqreturn_t pcc_mbox_irq(int irq, void *p)
>>> +{
>>> + struct acpi_generic_address *doorbell_ack;
>>> + struct acpi_pcct_hw_reduced *pcct_ss;
>>> + struct mbox_chan *chan = p;
>>> + u64 doorbell_ack_preserve;
>>> + u64 doorbell_ack_write;
>>> + u64 doorbell_ack_val;
>>> + int ret;
>>> +
>>> + pcct_ss = chan->con_priv;
>>> +
>>> + mbox_chan_received_data(chan, NULL);
>>
>> Does this really do anything? IIUC, your mbox controller rings
>> doorbell, platform sets cmd_completion and sends an IRQ to the OS.
>> This is the function where you field it to ACK the doorbell. But
>> you're not really consuming any new data sent by the platform, right?
>> i.e. this IRQ use case is not the same as the async notification from
>> platform as described in the ACPIv5+ spec. Or did I misunderstand the
>> bigger picture?
>>
>
> The purpose of this function call is
> 1./ Notify the completion of a command to OSPM.
> For example, instead of using polling with udelay, CPPC could use this
> call to complete a "completion".
> I'm preparing to post a version to support it for CPPC.
>
I see. This is the part I was missing. Seems like you could call the
mbox_chan_received_data() only after you add support for this.
> 2./ Notify OSPM about a notification message sent by Platform
This will require adding some sort of rx_callback to field the notification.
>>
>> [...]
>>
>>> +
>>> +/**
>>> * acpi_pcc_probe - Parse the ACPI tree for the PCCT.
>>> *
>>> * Return: 0 for Success, else errno.
>>> @@ -316,7 +449,9 @@ static int __init acpi_pcc_probe(void)
>>> acpi_size pcct_tbl_header_size;
>>> struct acpi_table_header *pcct_tbl;
>>> struct acpi_subtable_header *pcct_entry;
>>> - int count, i;
>>> + struct acpi_table_pcct *acpi_pcct_tbl;
>>> + int count, i, rc;
>>> + int sum = 0;
>>> acpi_status status = AE_OK;
>>>
>>> /* Search for PCCT */
>>> @@ -333,37 +468,66 @@ static int __init acpi_pcc_probe(void)
>>> sizeof(struct acpi_table_pcct),
>>> ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE,
>>> parse_pcc_subspace, MAX_PCC_SUBSPACES);
>>> + sum += (count > 0)? count: 0;
>>> +
>>> + count = acpi_table_parse_entries(ACPI_SIG_PCCT,
>>> + sizeof(struct acpi_table_pcct),
>>> + ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2,
>>> + parse_pcc_subspace, MAX_PCC_SUBSPACES);
>>> + sum += (count > 0)? count: 0;
>>>
>>> - if (count <= 0) {
>>> + if (sum == 0 || sum >= MAX_PCC_SUBSPACES) {
>>> pr_err("Error parsing PCC subspaces from PCCT\n");
>>> return -EINVAL;
>>> }
>>>
>>> pcc_mbox_channels = kzalloc(sizeof(struct mbox_chan) *
>>> - count, GFP_KERNEL);
>>> -
>>> + sum, GFP_KERNEL);
>>> if (!pcc_mbox_channels) {
>>> pr_err("Could not allocate space for PCC mbox channels\n");
>>> return -ENOMEM;
>>> }
>>>
>>> - pcc_doorbell_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL);
>>> + pcc_doorbell_vaddr = kcalloc(sum, sizeof(void *), GFP_KERNEL);
>>> if (!pcc_doorbell_vaddr) {
>>> - kfree(pcc_mbox_channels);
>>> - return -ENOMEM;
>>> + rc = -ENOMEM;
>>> + goto err_free_mbox;
>>> + }
>>> +
>>> + pcc_doorbell_ack_vaddr = kcalloc(sum, sizeof(void *), GFP_KERNEL);
>>> + if (!pcc_doorbell_ack_vaddr) {
>>> + rc = -ENOMEM;
>>> + goto err_free_db_vaddr;
>>> + }
>>> +
>>> + pcc_doorbell_irq = kcalloc(sum, sizeof(int), GFP_KERNEL);
>>> + if (!pcc_doorbell_irq) {
>>> + rc = -ENOMEM;
>>> + goto err_free_db_ack_vaddr;
>>> }
>>>
>>> /* Point to the first PCC subspace entry */
>>> pcct_entry = (struct acpi_subtable_header *) (
>>> (unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
>>>
>>> - for (i = 0; i < count; i++) {
>>> + acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
>>> + if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL)
>>> + pcc_mbox_ctrl.txdone_irq = true;
>>> +
>>
>> This flag is still bothering me. Can't you have a system where one
>> client requires polling on the command completion bit and another can
>> send a command completion IRQ? Seems to me that you need a channel
>> specific flag to indicate this. Besides, this global flag seems to be
>> used for async platform notifications. i.e. when the OS sets the
>> Generate doorbell irq bit in the Command field (Section 14.2.1 in ACPI
>> v6.1).
>
> I thought this bit is the global configuration for PCC.
> We still can support the polling mode if this flag is ON. Just don't
> set "Generate Doorbell Interrupt" bit inside Command Field.
>
>From the spec point of view it would seem so, but does the mbox
controller code allow for that? i.e. let individual PCC channels
decide whether to use txdone irq or poll? Seems like
pcc_mbox_ctrl.txdone_irq is a global setting for all mbox channels.
I apologize again, going forward my replies could be further delayed.
In process of relocating to a new job and role to a different city
which is several time zones away. :)
Thanks,
Ashwin.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
