This RFC patch series is v2 of a previous posting: https://lkml.org/lkml/2016/4/14/702 v1 -> v2: - Rebased on top of dependencies series [1][2][3](v4.7-rc1) - Removed IOMMU fwnode generalization - Implemented ARM SMMU v3 ACPI probing instead of ARM SMMU v2 owing to patch series dependencies [1] - Moved platform device creation logic to IORT code to generalize its usage for ARM SMMU v1-v2-v3 components - Removed reliance on ACPI early device probing - Created IORT specific iommu_xlate() translation hook leaving OF code unchanged according to v1 reviews The ACPI IORT table provides information that allows instantiating ARM SMMU devices and carrying out id mappings between components on ARM based systems (devices, IOMMUs, interrupt controllers). http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Building on basic IORT support, available through [2]: this patchset enables ARM SMMU v3 support on ACPI systems. Most of the code is aimed at building the required generic ACPI infrastructure to create and enable IOMMU components and to bring the IOMMU infrastructure for ACPI on par with DT, which is going to make future ARM SMMU components easier to integrate. PATCH (1-2) fix compile warning/errors in [2] PATCH (3) rework ARM64 IOMMU bus notifier to attach dma_ops. PATCH (4) provides IORT support for registering IOMMU components. PATCH (5) adds IORT based look-up for named components. PATCH (6) improve IORT identifiers mapping API to make it work across all possible IORT components. PATCH (7) provides an IORT function to detect existence of specific type of IORT components. PATCH (8) refactors the ARM SMMU v3 driver so that the init functions are split in a way that groups together code that probes through DT and code that carries out HW registers FW agnostic probing, in preparation for adding the ACPI probing path. PATCH (9) rework ARM SMMU v3 platform driver registration to make it work on ACPI systems. PATCH (10) creates the kernel infrastructure required to create ARM SMMU platform devices for IORT nodes. PATCH (11) Building on patch (10), it adds ARM SMMU v3 IORT IOMMU operations to create and probe ARM SMMU v3 components. PATCH (12) implements the of_dma_configure() API in ACPI world - acpi_dma_configure() - and patches PCI and ACPI core code to start making use of it. PATCH (13) provides IORT infrastructure to carry out IOMMU configuration for devices and hook it up to the previously introduced ACPI DMA configure API. PATCH (14) define a function to look-up platform devices through their respective IORT nodes stored in platform_data. This patch is somewhat controversial and is provided as an initial solution to the problem pending further discussions. PATCH (15) provides code to carry out ACPI IORT based device identifiers translation for ARM SMMU v3 components. This patchset is built on top and depends on these three patch series: [1] R.Murphy "Generic DT bindings for PCI and ARM SMMU v3" http://marc.info/?l=linux-arm-kernel&m=146497432413816&w=2 [2] T.Nowicki "Introduce ACPI world to ITS irqchip" v5 http://marc.info/?l=linux-acpi&m=146469369703684&w=2 [3] T.Nowicki "Support for ARM64 ACPI based PCI host controller" v8 http://marc.info/?l=linux-acpi&m=146462129816292&w=2 and is provided for early review/testing purposes here: git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v2 Tested on FVP models for ARM SMMU v3 probing path. Lorenzo Pieralisi (15): drivers: acpi: iort: fix struct pci_dev compiler warnings drivers: irqchip: its: fix its_acpi_probe() prototype arm64: mm: change IOMMU notifier action to attach DMA ops drivers: acpi: iort: add support for IOMMU registration drivers: acpi: iort: add support for named component look-up drivers: acpi: iort: enhance device identifiers mappings drivers: acpi: iort: add node match function drivers: acpi: iort: add support for ARM SMMU platform devices creation drivers: iommu: arm-smmu-v3: split probe functions into DT/generic portions drivers: iommu: arm-smmu-v3: enable ACPI driver initialization drivers: iommu: arm-smmu-v3: add IORT iommu configuration drivers: acpi: implement acpi_dma_configure drivers: acpi: iort: introduce iort_iommu_configure drivers: acpi: iort: add function to retrieve IOMMU platform devices drivers: iommu: arm-smmu-v3: allow ACPI based streamid translation arch/arm64/mm/dma-mapping.c | 2 +- drivers/acpi/glue.c | 4 +- drivers/acpi/iort.c | 361 ++++++++++++++++++++++++++++++++++++++- drivers/acpi/scan.c | 29 ++++ drivers/iommu/arm-smmu-v3.c | 235 ++++++++++++++++++++++--- drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/pci/probe.c | 3 +- include/acpi/acpi_bus.h | 2 + include/linux/acpi.h | 5 + include/linux/iort.h | 43 +++++ 10 files changed, 652 insertions(+), 34 deletions(-) -- 2.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
