Re: [PATCH v8 2/4] ACPI: parse SPCR and enable matching console

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 20, 2016 at 3:03 PM, Aleksey Makarov
<aleksey.makarov@xxxxxxxxxx> wrote:
> 'ARM Server Base Boot Requiremets' [1] mentions SPCR (Serial Port
> Console Redirection Table) [2] as a mandatory ACPI table that
> specifies the configuration of serial console.
>
> Defer initialization of DT earlycon until ACPI/DT decision is made.
>
> Parse the ACPI SPCR table, setup earlycon if required,
> enable specified console.
>
> Thanks to Peter Hurley for explaining how this should work.
>
> [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0044a/index.html
> [2] https://msdn.microsoft.com/en-us/library/windows/hardware/dn639132(v=vs.85).aspx
>
> Signed-off-by: Aleksey Makarov <aleksey.makarov@xxxxxxxxxx>
> Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
> Tested-by: Kefeng Wang <wangkefeng.wang@xxxxxxxxxx>

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

for the ACPI part.

> ---
>  drivers/acpi/Kconfig          |   3 ++
>  drivers/acpi/Makefile         |   1 +
>  drivers/acpi/spcr.c           | 111 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/tty/serial/earlycon.c |  19 +++++++-
>  include/linux/acpi.h          |   6 +++
>  include/linux/serial_core.h   |   6 +++
>  6 files changed, 144 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/acpi/spcr.c
>
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index c204344..c8c02f1 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -77,6 +77,9 @@ config ACPI_DEBUGGER_USER
>
>  endif
>
> +config ACPI_SPCR_TABLE
> +       bool
> +
>  config ACPI_SLEEP
>         bool
>         depends on SUSPEND || HIBERNATION
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 8b08e20..d0dc940 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
>  obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
>  obj-$(CONFIG_ACPI_BGRT)                += bgrt.o
>  obj-$(CONFIG_ACPI_CPPC_LIB)    += cppc_acpi.o
> +obj-$(CONFIG_ACPI_SPCR_TABLE)  += spcr.o
>  obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
>
>  # processor has its own "processor." module_param namespace
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> new file mode 100644
> index 0000000..f4cfc5c
> --- /dev/null
> +++ b/drivers/acpi/spcr.c
> @@ -0,0 +1,111 @@
> +/*
> + * Copyright (c) 2012, Intel Corporation
> + * Copyright (c) 2015, Red Hat, Inc.
> + * Copyright (c) 2015, 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#define pr_fmt(fmt) "ACPI: SPCR: " fmt
> +
> +#include <linux/acpi.h>
> +#include <linux/console.h>
> +#include <linux/kernel.h>
> +#include <linux/serial_core.h>
> +
> +/**
> + * parse_spcr() - parse ACPI SPCR table and add preferred console
> + *
> + * @earlycon: set up earlycon for the console specified by the table
> + *
> + * For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
> + * defined to parse ACPI SPCR table.  As a result of the parsing preferred
> + * console is registered and if @earlycon is true, earlycon is set up.
> + *
> + * When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
> + * from arch inintialization code as soon as the DT/ACPI decision is made.
> + *
> + */
> +int __init parse_spcr(bool earlycon)
> +{
> +       static char opts[64];
> +       struct acpi_table_spcr *table;
> +       acpi_size table_size;
> +       acpi_status status;
> +       char *uart;
> +       char *iotype;
> +       int baud_rate;
> +       int err;
> +
> +       if (acpi_disabled)
> +               return -ENODEV;
> +
> +       status = acpi_get_table_with_size(ACPI_SIG_SPCR, 0,
> +                                         (struct acpi_table_header **)&table,
> +                                         &table_size);
> +
> +       if (ACPI_FAILURE(status))
> +               return -ENOENT;
> +
> +       if (table->header.revision < 2) {
> +               err = -ENOENT;
> +               pr_err("wrong table version\n");
> +               goto done;
> +       }
> +
> +       iotype = table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY ?
> +                       "mmio" : "io";
> +
> +       switch (table->interface_type) {
> +       case ACPI_DBG2_ARM_SBSA_32BIT:
> +               iotype = "mmio32";
> +               /* fall through */
> +       case ACPI_DBG2_ARM_PL011:
> +       case ACPI_DBG2_ARM_SBSA_GENERIC:
> +       case ACPI_DBG2_BCM2835:
> +               uart = "pl011";
> +               break;
> +       case ACPI_DBG2_16550_COMPATIBLE:
> +       case ACPI_DBG2_16550_SUBSET:
> +               uart = "uart";
> +               break;
> +       default:
> +               err = -ENOENT;
> +               goto done;
> +       }
> +
> +       switch (table->baud_rate) {
> +       case 3:
> +               baud_rate = 9600;
> +               break;
> +       case 4:
> +               baud_rate = 19200;
> +               break;
> +       case 6:
> +               baud_rate = 57600;
> +               break;
> +       case 7:
> +               baud_rate = 115200;
> +               break;
> +       default:
> +               err = -ENOENT;
> +               goto done;
> +       }
> +
> +       snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> +                table->serial_port.address, baud_rate);
> +
> +       pr_info("console: %s", opts);
> +
> +       if (earlycon)
> +               setup_earlycon(opts);
> +
> +       err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> +
> +done:
> +       early_acpi_os_unmap_memory((void __iomem *)table, table_size);
> +       return err;
> +}
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 7aae655..ea00b9f 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -21,6 +21,7 @@
>  #include <linux/sizes.h>
>  #include <linux/of.h>
>  #include <linux/of_fdt.h>
> +#include <linux/acpi.h>
>
>  #ifdef CONFIG_FIX_EARLYCON_MEM
>  #include <asm/fixmap.h>
> @@ -199,6 +200,14 @@ int __init setup_earlycon(char *buf)
>         return -ENOENT;
>  }
>
> +/*
> + * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
> + * command line does not start DT earlycon immediately, instead it defers
> + * starting it until DT/ACPI decision is made.  At that time if ACPI is enabled
> + * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
> + */
> +bool earlycon_init_is_deferred __initdata;
> +
>  /* early_param wrapper for setup_earlycon() */
>  static int __init param_setup_earlycon(char *buf)
>  {
> @@ -208,8 +217,14 @@ static int __init param_setup_earlycon(char *buf)
>          * Just 'earlycon' is a valid param for devicetree earlycons;
>          * don't generate a warning from parse_early_params() in that case
>          */
> -       if (!buf || !buf[0])
> -               return early_init_dt_scan_chosen_stdout();
> +       if (!buf || !buf[0]) {
> +               if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
> +                       earlycon_init_is_deferred = true;
> +                       return 0;
> +               } else {
> +                       return early_init_dt_scan_chosen_stdout();
> +               }
> +       }
>
>         err = setup_earlycon(buf);
>         if (err == -ENOENT || err == -EALREADY)
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 288fac5..1de43be 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -997,4 +997,10 @@ static inline struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
>  #define acpi_probe_device_table(t)     ({ int __r = 0; __r;})
>  #endif
>
> +#ifdef CONFIG_ACPI_SPCR_TABLE
> +int parse_spcr(bool earlycon);
> +#else
> +static inline int parse_spcr(bool earlycon) { return 0; }
> +#endif
> +
>  #endif /*_LINUX_ACPI_H*/
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index a3d7c0d..60b6143 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -366,6 +366,12 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
>                              unsigned long node,
>                              const char *options);
>
> +#ifdef CONFIG_SERIAL_EARLYCON
> +extern bool earlycon_init_is_deferred __initdata;
> +#else
> +static const bool earlycon_init_is_deferred;
> +#endif
> +
>  struct uart_port *uart_get_console(struct uart_port *ports, int nr,
>                                    struct console *c);
>  int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
> --
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux