This patch adds function pl011_console_match() that implements
method match of struct console. It allows to match consoles against
data specified in a string, for example taken from command line or
compiled by ACPI SPCR table handler.
Signed-off-by: Aleksey Makarov <aleksey.makarov@xxxxxxxxxx>
Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/amba-pl011.c | 56 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index a2aa655..388edc8 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2288,12 +2288,68 @@ static int __init pl011_console_setup(struct console *co, char *options)
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
+/**
+ * pl011_console_match - non-standard console matching
+ * @co: registering console
+ * @name: name from console command line
+ * @idx: index from console command line
+ * @options: ptr to option string from console command line
+ *
+ * Only attempts to match console command lines of the form:
+ * console=pl011,mmio|mmio32,<addr>[,<options>]
+ * console=pl011,0x<addr>[,<options>]
+ * This form is used to register an initial earlycon boot console and
+ * replace it with the amba_console at pl011 driver init.
+ *
+ * Performs console setup for a match (as required by interface)
+ * If no <options> are specified, then assume the h/w is already setup.
+ *
+ * Returns 0 if console matches; otherwise non-zero to use default matching
+ */
+static int __init pl011_console_match(struct console *co, char *name, int idx,
+ char *options)
+{
+ char match[] = "pl011"; /* pl011-specific earlycon name */
+ unsigned char iotype;
+ unsigned long addr;
+ int i;
+
+ if (strncmp(name, match, 5) != 0)
+ return -ENODEV;
+
+ if (uart_parse_earlycon(options, &iotype, &addr, &options))
+ return -ENODEV;
+
+ /* try to match the port specified on the command line */
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+ struct uart_port *port;
+
+ if (!amba_ports[i])
+ continue;
+
+ port = &amba_ports[i]->port;
+
+ if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
+ continue;
+
+ if (port->mapbase != addr)
+ continue;
+
+ co->index = i;
+ port->cons = co;
+ return pl011_console_setup(co, options);
+ }
+
+ return -ENODEV;
+}
+
static struct uart_driver amba_reg;
static struct console amba_console = {
.name = "ttyAMA",
.write = pl011_console_write,
.device = uart_console_device,
.setup = pl011_console_setup,
+ .match = pl011_console_match,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &amba_reg,
--
2.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
