On Tue, May 10, 2016 at 5:19 PM, Tomasz Nowicki <tn@xxxxxxxxxxxx> wrote: > This patch is going to implement generic PCI host controller for > ACPI world, similar to what pci-host-generic.c driver does for DT world. > > All such drivers, which we have seen so far, were implemented within > arch/ directory since they had some arch assumptions (x86 and ia64). > However, they all are doing similar thing, so it makes sense to find > some common code and abstract it into the generic driver. Does it mean x86 and ia64 will now be able to use this code too? > In order to handle PCI config space regions properly, we define new > MCFG interface which does sanity checks on MCFG table and keeps its > root pointer. User is able to lookup MCFG regions based on that root > pointer and specified domain:bus_start:bus_end touple. We are using > pci_mmcfg_late_init old prototype to avoid another function name. > > The implementation of pci_acpi_scan_root() looks up the MCFG entries > and sets up a new mapping (regions are not mapped until host controller ask > for it). Generic PCI functions are used for accessing config space. > Driver selects PCI_ECAM and uses functions from drivers/pci/ecam.h > to create and access ECAM mappings. > > As mentioned in Kconfig help section, ACPI_PCI_HOST_GENERIC choice > should be made on a per-architecture basis. If that code really is generic and there will be more than one architecture using it ever, I think it'll be better for the architectures that don't use it to set something like ARCH_ACPI_PCI_HOST and whoever doesn't set that will use the generic thing. That'd be more logical at least IMO. > Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx> > Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx> > --- > drivers/acpi/Kconfig | 8 +++ > drivers/acpi/Makefile | 1 + > drivers/acpi/pci_mcfg.c | 97 ++++++++++++++++++++++++++ > drivers/acpi/pci_root_generic.c | 149 ++++++++++++++++++++++++++++++++++++++++ > drivers/pci/ecam.h | 5 ++ > include/linux/pci-acpi.h | 5 ++ > include/linux/pci.h | 5 +- > 7 files changed, 269 insertions(+), 1 deletion(-) > create mode 100644 drivers/acpi/pci_mcfg.c > create mode 100644 drivers/acpi/pci_root_generic.c > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index 183ffa3..44afc76 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -346,6 +346,14 @@ config ACPI_PCI_SLOT > i.e., segment/bus/device/function tuples, with physical slots in > the system. If you are unsure, say N. > > +config ACPI_PCI_HOST_GENERIC > + bool > + select PCI_ECAM > + help > + Select this config option from the architecture Kconfig, > + if it is preferred to enable ACPI PCI host controller driver which > + has no arch-specific assumptions. > + > config X86_PM_TIMER > bool "Power Management Timer Support" if EXPERT > depends on X86 > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > index 81e5cbc..627a2b7 100644 > --- a/drivers/acpi/Makefile > +++ b/drivers/acpi/Makefile > @@ -40,6 +40,7 @@ acpi-$(CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC) += processor_pdc.o > acpi-y += ec.o > acpi-$(CONFIG_ACPI_DOCK) += dock.o > acpi-y += pci_root.o pci_link.o pci_irq.o > +obj-$(CONFIG_ACPI_PCI_HOST_GENERIC) += pci_root_generic.o pci_mcfg.o > acpi-y += acpi_lpss.o acpi_apd.o > acpi-y += acpi_platform.o > acpi-y += acpi_pnp.o > diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > new file mode 100644 > index 0000000..373d079 > --- /dev/null > +++ b/drivers/acpi/pci_mcfg.c > @@ -0,0 +1,97 @@ > +/* > + * Copyright (C) 2016 Broadcom > + * Author: Jayachandran C <jchandra@xxxxxxxxxxxx> > + * Copyright (C) 2016 Semihalf > + * Author: Tomasz Nowicki <tn@xxxxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License, version 2, as > + * published by the Free Software Foundation (the "GPL"). > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License version 2 (GPLv2) for more details. > + * > + * You should have received a copy of the GNU General Public License > + * version 2 (GPLv2) along with this source code. > + */ > +#include <linux/kernel.h> > +#include <linux/pci.h> > +#include <linux/pci-acpi.h> > + > +#define PREFIX "ACPI: " If that is a new file (and I'm totally unconvinced about the need for it), can we simply define a pr_fmt() here as all messages in it seem to be printed by the pr_* functions? -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
