On 03/18/2016 09:00 AM, fu.wei@xxxxxxxxxx wrote:
From: Fu Wei <fu.wei@xxxxxxxxxx>
This driver adds support for parsing all kinds of timer in GTDT:
(1)arch timer: provide a kernel API to parse all the PPIs and
always-on info in GTDT and export them by arch_timer_data struct.
(2)memory-mapped timer: provide several kernel APIs to parse
GT Block Structure in GTDT, export those info by return value
and arch_timer_mem_data struct.
(3)SBSA Generic Watchdog: parse all info in SBSA Generic Watchdog
Structure in GTDT, and creating a platform device with that
information. This allows the operating system to obtain device
data from the resource of platform device.
The platform device named "sbsa-gwdt" can be used by the ARM SBSA
Generic Watchdog driver.
By this driver, we can simplify all the relevant drivers, and
separate all the ACPI GTDT knowledge from them.
Signed-off-by: Fu Wei <fu.wei@xxxxxxxxxx>
Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
---
drivers/acpi/Kconfig | 9 +
drivers/acpi/Makefile | 1 +
drivers/acpi/gtdt.c | 376 +++++++++++++++++++++++++++++++++++
include/clocksource/arm_arch_timer.h | 13 ++
include/linux/acpi.h | 17 ++
5 files changed, 416 insertions(+)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 82b96ee..abf33d3 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -521,4 +521,13 @@ config XPOWER_PMIC_OPREGION
endif
+config ACPI_GTDT
+ bool "ACPI GTDT Support"
+ depends on ARM64
+ help
+ GTDT (Generic Timer Description Table) provides information
+ for per-processor timers and Platform (memory-mapped) timers
+ for ARM platforms. Select this option to provide information
+ needed for the timers init.
Why not ARM64's Kconfig select ACPI_GTDT ?
This config option assumes an user will manually select this option
which I believe it makes sense to have always on when ARM64=y. So why
not create a silent option and select it directly from the ARM64
platform Kconfig ?
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index edeb2d1..f7ea779 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -98,5 +98,6 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
+obj-$(CONFIG_ACPI_GTDT) += gtdt.o
acpi_gtdt.o ?
video-objs += acpi_video.o video_detect.o
diff --git a/drivers/acpi/gtdt.c b/drivers/acpi/gtdt.c
new file mode 100644
index 0000000..d1b851c
--- /dev/null
+++ b/drivers/acpi/gtdt.c
@@ -0,0 +1,376 @@
+/*
+ * ARM Specific GTDT table Support
+ *
+ * Copyright (C) 2015, Linaro Ltd.
+ * Author: Fu Wei <fu.wei@xxxxxxxxxx>
+ * Hanjun Guo <hanjun.guo@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#undef pr_fmt
Why #undef ?
+#define pr_fmt(fmt) "GTDT: " fmt
+
+static u32 platform_timer_count __initdata;
+static int gtdt_timers_existence __initdata;
+
+/*
+ * Get some basic info from GTDT table, and init the global variables above
+ * for all timers initialization of Generic Timer.
+ * This function does some validation on GTDT table, and will be run only once.
+ */
+static void __init *platform_timer_info_init(struct acpi_table_header *table)
+{
+ void *gtdt_end, *platform_timer_struct, *platform_timer;
+ struct acpi_gtdt_header *header;
+ struct acpi_table_gtdt *gtdt;
+ u32 i;
+
+ gtdt = container_of(table, struct acpi_table_gtdt, header);
+ if (!gtdt) {
+ pr_err("table pointer error.\n");
+ return NULL;
+ }
+ gtdt_end = (void *)table + table->length;
+ gtdt_timers_existence |= ARCH_CP15_TIMER;
+
+ if (table->revision < 2) {
+ pr_info("Revision:%d doesn't support Platform Timers.\n",
+ table->revision);
+ return NULL;
+ }
+
+ platform_timer_count = gtdt->platform_timer_count;
+ if (!platform_timer_count) {
+ pr_info("No Platform Timer structures.\n");
+ return NULL;
+ }
+
+ platform_timer_struct = (void *)gtdt + gtdt->platform_timer_offset;
+ if (platform_timer_struct < (void *)table +
+ sizeof(struct acpi_table_gtdt)) {
+ pr_err(FW_BUG "Platform Timer pointer error.\n");
+ return NULL;
+ }
+
+ platform_timer = platform_timer_struct;
+ for (i = 0; i < platform_timer_count; i++) {
+ if (platform_timer > gtdt_end) {
+ pr_err(FW_BUG "subtable pointer overflows.\n");
+ platform_timer_count = i;
+ break;
+ }
+ header = (struct acpi_gtdt_header *)platform_timer;
+ if (header->type == ACPI_GTDT_TYPE_TIMER_BLOCK)
+ gtdt_timers_existence |= ARCH_MEM_TIMER;
+ else if (header->type == ACPI_GTDT_TYPE_WATCHDOG)
+ gtdt_timers_existence |= ARCH_WD_TIMER;
+ platform_timer += header->length;
+ }
+
+ return platform_timer_struct;
+}
+
+static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
+{
+ int trigger, polarity;
+
+ if (!interrupt)
+ return 0;
+
+ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
+ : ACPI_LEVEL_SENSITIVE;
+
+ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
+ : ACPI_ACTIVE_HIGH;
+
+ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
+}
+
+/*
+ * Get the necessary info of arch_timer from GTDT table.
+ */
+int __init gtdt_arch_timer_data_init(struct acpi_table_header *table,
+ struct arch_timer_data *data)
+{
+ struct acpi_table_gtdt *gtdt;
+
+ if (acpi_disabled || !data)
+ return -EINVAL;
+
+ if (!table) {
+ if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_GTDT, 0, &table)))
+ return -EINVAL;
+ }
+
+ if (!gtdt_timers_existence)
+ platform_timer_info_init(table);
Same comment than the one below in the gtdt_gt_block function. There is
something wrong in the init sequence.
+ gtdt = container_of(table, struct acpi_table_gtdt, header);
+
+ data->phys_secure_ppi =
+ map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
+ gtdt->secure_el1_flags);
+
+ data->phys_nonsecure_ppi =
+ map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
+ gtdt->non_secure_el1_flags);
+
+ data->virt_ppi =
+ map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
+ gtdt->virtual_timer_flags);
+
+ data->hyp_ppi =
+ map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
+ gtdt->non_secure_el2_flags);
+
+ data->c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+
+ return 0;
+}
+
+bool __init gtdt_timer_is_available(int type)
+{
+ return gtdt_timers_existence | type;
+}
+
+/*
+ * Helper function for getting the pointer of platform_timer_struct.
+ */
+static void __init *get_platform_timer_struct(struct acpi_table_header *table)
+{
+ struct acpi_table_gtdt *gtdt;
+
+ if (!table) {
+ pr_err("table pointer error.\n");
+ return NULL;
+ }
IMO, this check is not necessary as the caller should have checked it
before calling this function.
+ gtdt = container_of(table, struct acpi_table_gtdt, header);
+
+ return (void *)gtdt + gtdt->platform_timer_offset;
+}
+
+ /*
+ * Get the pointer of GT Block Structure in GTDT table
+ */
+void __init *gtdt_gt_block(struct acpi_table_header *table, int index)
+{
+ struct acpi_gtdt_header *header;
+ void *platform_timer;
+ int i, j;
+
+ if (!gtdt_timers_existence)
+ platform_timer = platform_timer_info_init(table);
+ else
+ platform_timer = get_platform_timer_struct(table);
This portion of code suggests there is a lost of control of the init
sequence or will give the opportunity of the caller to do it so.
I would suggest to be more strict:
if (!gtdt_timers_existence)
return NULL;
and let the user of this function to ensure gtdt_gt_block is called
after the gtdt tables are initialized.
+ if (!gtdt_timer_is_available(ARCH_MEM_TIMER))
+ return NULL;
+
+ for (i = 0, j = 0; i < platform_timer_count; i++) {
+ header = (struct acpi_gtdt_header *)platform_timer;
+ if (header->type == ACPI_GTDT_TYPE_TIMER_BLOCK && j++ == index)
+ return platform_timer;
+ platform_timer += header->length;
+ }
+
+ return NULL;
+}
+
+/*
+ * Get the timer_count(the number of timer frame) of a GT Block in GTDT table
+ */
+u32 __init gtdt_gt_timer_count(struct acpi_gtdt_timer_block *gt_block)
+{
+ if (!gt_block) {
+ pr_err("invalid GT Block baseaddr.\n");
+ return 0;
+ }
In the patch 5/5, !gt_block is already checked.
+ return gt_block->timer_count;
+}
+
+/*
+ * Get the physical address of GT Block in GTDT table
+ */
+void __init *gtdt_gt_cntctlbase(struct acpi_gtdt_timer_block *gt_block)
+{
+ if (!gt_block) {
+ pr_err("invalid GT Block baseaddr.\n");
+ return NULL;
+ }
Same comment here.
arch_timer_mem_best_frame in patch 5/5 checks !gt_block then calls
arch_timer_mem_cnttidr which in turn calls gtdt_gt_cntctlbase
+ return (void *)gt_block->block_address;
+}
+
+/*
+ * Helper function for getting the pointer of a timer frame in GT block.
+ */
+static void __init *gtdt_gt_timer_frame(struct acpi_gtdt_timer_block *gt_block,
+ int index)
+{
+ void *timer_frame;
+
+ if (!(gt_block && gt_block->timer_count))
+ return NULL;
Pointless check.
Ok, I am giving up the review at this point.
Don't introduce a family of helpers to access gtdt structure internal. I
think it would much more nice if you create a structure for the timer,
pass it to the acpi subsystem and let it fill it.
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
