On Tue, Mar 01, 2016 at 01:49:34PM -0500, Sinan Kaya wrote:
> > There's so much code there, that I think all the code obscures the
> > fact that there's almost nothing really happening. In broad outline,
> > I think we care about:
> >
> > - the legacy ISA IRQs, i.e., the contents of acpi_irq_isa_penalty[]
> > - acpi_irq_isa= from command line
> > - acpi_irq_pci= from command line
> > - which IRQ is used for SCI
> > - number of PCI Interrupt Link devices sharing an IRQ
> >
> > I doubt we need any dynamic allocation at all to manage this. We
> > already have the acpi_irq_isa_penalty[] table statically allocated.
> > The SCI IRQ is one word.
>
> Just to be clear, we have resized acpi_irq_penalty table to 16 and named it
> acpi_irq_isa_penalty. We are dynamically allocating memory for the rest of
> the interrupts that is bigger than 16.
>
> The SCI interrupt that caused the failure is interrupt 22 in this case. The code
> was trying to allocate a new entry with kzalloc. 22 won't fit into the
> acpi_irq_isa_penalty array. How do we handle such case? Is there a cap on the SCI
> interrupt number?
>
> That's why, I was trying to reallocate some memory in this code.
I don't think there's a restriction on what the SCI IRQ can be. But
there is only one SCI IRQ, so all we have to do is keep track of what
it is, which only requires one word.
> > I bet the command-line stuff is only
> > useful for the 16 ISA IRQs and could be merged into
> > acpi_irq_isa_penalty[].
> > Same for acpi_penalize_isa_irq() and
> > acpi_isa_irq_available().
>
> Agreed. No issues with ISA IRQs.
>
> > We could easily compute the
> > number of links sharing an IRQ by traversing acpi_link_list.
>
> Sorry, I couldn't quite get this. Where would you do this?
I've never been exactly clear on how these links work. So pardon me
while I think out loud and bore you with what you already know
(correct me if I get this wrong):
- A link device has a PCI wired interrupt (INTA, INTB, etc.) on its
"downstream" end.
- The link device has a set of possible interrupt controller inputs
to which it can connect the PCI interrupt. _PRS contains this
set.
- When we enable a PCI device's interrupt, Interrupt Pin from config
space tells us which INTx it uses. The _PRT tells us whether that
INTx is connected to (a) a fixed GSI or (b) an Interrupt Link that
can be configured to one of several interrupt controller inputs.
- If the latter, we must select one of the interrupt controller
inputs to use, i.e., one of the IRQs from _PRS, and enable the
Link.
- If the Link is already active, we probably shouldn't change its
configuration because other devices might already be using it.
- If the Link is inactive, we must choose an IRQ and activate it.
We should be able to choose anything from _PRS (as long as the
level & trigger attributes match), but we can try to reduce IRQ
sharing by avoiding an IRQ that's already in use.
This IRQ selection process is where we use the penalty information.
In acpi_pci_link_allocate(), we iterate through the possible choices
(link->irq.possible[i]) and choose the one with the smallest penalty.
Here's a sketch of what I'm thinking the code could look like. In x86
code:
int pcibios_irq_penalty(int irq)
{
if (irq >= ACPI_MAX_ISA_IRQ)
return 0;
return acpi_irq_isa_penalty[irq] + acpi_irq_cmd_line_penalty[irq];
}
In pci_link.c:
static int sci_irq, sci_irq_penalty;
void acpi_penalize_sci_irq(int irq, int trigger, int polarity)
{
if (irq < 0)
return;
sci_irq = irq;
if (trigger != ACPI_MADT_TRIGGER_LEVEL ||
polarity != ACPI_MADT_POLARITY_ACTIVE_LOW)
sci_irq_penalty = infinite; /* can't use for PCI at all */
else
sci_irq_penalty = PIRQ_PENALTY_PCI_USING;
}
static pci_irq_sharing_penalty(int irq)
{
struct acpi_pci_link *link;
int penalty = 0;
list_for_each_entry(link, &acpi_link_list, list) {
/*
* If a link is active, penalize its IRQ heavily so we try to choose
* a different IRQ.
*/
if (link->irq.active && link->irq.active == irq)
penalty += PIRQ_PENALTY_PCI_USING;
else {
/*
* If a link is inactive, penalize the IRQs it might use, but
* not as severely.
*/
for (i = 0; i < link->irq.possible_count; i++)
if (link->irq.possible[i] == irq)
penalty += PIRQ_PENALTY_PCI_POSSIBLE;
}
}
return penalty;
}
int __weak pcibios_irq_penalty(int irq)
{
return 0;
}
static int acpi_irq_get_penalty(int irq)
{
int penalty;
penalty = pcibios_irq_penalty(irq);
if (irq == sci_irq)
penalty += sci_irq_penalty;
penalty += pci_irq_sharing_penalty(irq);
return penalty;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
