> -----Original Message----- > From: Arnd Bergmann [mailto:arnd@xxxxxxxx] > Sent: 04 February 2016 17:02 > To: Gabriele Paoloni > Cc: Guohanjun (Hanjun Guo); Wangzhou (B); liudongdong (C); Linuxarm; > qiujiang; bhelgaas@xxxxxxxxxx; Lorenzo.Pieralisi@xxxxxxx; > tn@xxxxxxxxxxxx; zhangjukuo; xuwei (O); Liguozhu (Kenneth); linux- > pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > acpi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; jcm@xxxxxxxxxx > Subject: Re: [RFC PATCH 0/4] Add ACPI support for HiSilicon PCIe Host > Controllers > > On Thursday 04 February 2016 16:44:12 Gabriele Paoloni wrote: > > Effectively the ACPI version of the HiSilicon driver does not rely on > > Designware as much as the DT version (that calls > dw_pcie_host_init()); > > however in order to do what you suggest I'd need to copy and paste > and > > modify dw_pcie_rd_conf and dw_pcie_wr_conf. > > Also I'd need to declare duplicate version of the functions in > > pcie-hisi-common.c (if I do not want to split the object across > > different paths "drivers/pci/host" and "drivers/acpi/") > > > > Now I can do it but I thought it was more correct to pass > &dw_pcie_ops > > as input pointer in DECLARE_ACPI_MCFG_FIXUP(); this is also because > maybe in > > future other Designware based controllers may need to support ACPI > and it > > would be easier for them to reuse their DT based driver functions > > > > Honestly I am a bit confused... > > > > I don't think you can use the dw_pcie_ops as-is anyway, as they in > turn rely on the device driver structure, and you also don't need > those as they seem to be written for the generic case of a 32-bit > architecture that does not have enough space to map the entire > config space into MMIO. Just set up all those mapping registers from > the firmware and pass the config space base address as you'd normally > do on ACPI. Hi Arnd I have now sent out patchset v2. Now I have removed the dependency from designware but I still think the best location for the code is in "drivers/pci/host/": the ACPI quirks share the config read/write functions with the DT driver, moreover for other hosts in future I think it makes sense to stay in "drivers/pci/host/" as they could even share more init code with their respective DT versions... Cheers Gab > > Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
