On Wed, Dec 16, 2015 at 08:11:12AM -0600, Suravee Suthikulpanit wrote: > >The clk framework should work fine if the returned clock is NULL (which > >I think is your case). > > > >The driver gates clocks when the device is suspended and on Intel LPSS > >there actually is a clock that gets gated. > > > >>[..] > >>@@ -203,13 +223,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) > >> dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | > >> DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; > >> > >>- dev->clk = devm_clk_get(&pdev->dev, NULL); > >>- dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; > >>- if (IS_ERR(dev->clk)) > >>- return PTR_ERR(dev->clk); > > Actually, if we don't provide the clock (which is the case for ACPI), this > would also return and cause the probing to fail. Indeed it seems that when you have CONFIG_COMMON_CLK selected the clock framework starts returning errors if the clock is not found. Since we need the clock for Intel LPSS I2C host controllers (and they may have *CNT methods), I think you just need to provide the clock for AMD I2C host controller in similar way than we do in drivers/acpi/acpi_lpss.c. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
