On Wed, Oct 21, 2015 at 06:14:27PM -0500, Ben Gardner wrote:
> Thanks for the help!
>
> >> So my questions are:
> >> Can I use I2cSerialBus with a PCI I2C controller?
> >
> > Yes you can.
> >
> > That's what we do all the time for Intel hardware.
>
> That is good to hear.
> ...
>
> > So you can just drop the whole _CRS and make your I2C host controller
> > device to look like:
> >
> > Device (I2C3)
> > {
> > Name (_ADR, 0x00180003)
> >
> > /* Standard Mode: HCNT, LCNT, SDA Hold Time */
> > Name (SSCN, Package () { 0x200, 0x200, 0x6 })
> >
> > /* Fast Mode: HCNT, LCNT, SDA Hold Time */
> > Name (FMCN, Package () { 0x55, 0x99, 0x6 })
> >
> > Device (EEP0)
> > {
> > Name (_CID, Package() { "24c02" })
> > Name (_CRS, ResourceTemplate () {
> > I2cSerialBus (0x0057, ControllerInitiated, 400000,
> > AddressingMode7Bit, "\\_SB.I2C3", 0x00,
> > ResourceConsumer,,)
> > })
> > }
> > }
>
> OK. I tried that.
> It looks like the device is nested properly in the ACPI tree:
>
> I see this symlink:
> /sys/bus/acpi/devices/24C02:00 ->
> ../../../devices/LNXSYSTM:00/LNXSYBUS:00/device:16/24C02:00
>
> # for x in /sys/bus/acpi/devices/* ; do if [ -e $x/path ] ; then
> printf "%-30.30s %s\n" "$(cat $x/path)" "$x" ; fi ; done | sort |
> grep I2C3
> \_SB_.I2C3 device:16
> \_SB_.I2C3.EEP0 24C02:00
>
> But no I2C device are created under /sys/bus/i2c/devices/.
> # ll /sys/bus/i2c/devices/
> lrwxrwxrwx 1 root root 0 Oct 21 11:30 i2c-1 ->
> ../../../devices/pci0000:00/0000:00:18.1/i2c-1
> lrwxrwxrwx 1 root root 0 Oct 21 11:30 i2c-2 ->
> ../../../devices/pci0000:00/0000:00:18.2/i2c-2
> lrwxrwxrwx 1 root root 0 Oct 21 11:30 i2c-3 ->
> ../../../devices/pci0000:00/0000:00:18.3/i2c-3
>
> I'll have to dig further to find where it is failing in i2c_core.c. I
> assume it will be in the same spot.
> Is there a way to see PCI to ACPI associations?
Yes, the PCI device has a symlink "firmware_node" which points to the
ACPI device.
Here an example from Skylake system (which uses PCI mode for LPSS
devices):
# ls -l /sys/bus/pci/devices/0000\:00\:15.1/firmware_node
lrwxrwxrwx 1 root root 0 Oct 22 08:00 /sys/bus/pci/devices/0000:00:15.1/firmware_node -> ../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:6f
# cat /sys/bus/pci/devices/0000\:00\:15.1/firmware_node/path
\_SB_.PCI0.I2C1
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
