On 08/07/15 14:56, Ashwin Chaugule wrote:
Hi Sudeep,
On 8 July 2015 at 09:43, Sudeep Holla <sudeep.holla@xxxxxxx> wrote:
On 08/07/15 02:27, Ashwin Chaugule wrote:
On 7 July 2015 at 21:07, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
On Monday, June 15, 2015 04:09:06 PM Ashwin Chaugule wrote:
The ACPI processor driver is currently tied too closely
to the ACPI C-states (CST), P-states (PSS) and other related
constructs for controlling CPU idle and CPU performance.
The newer ACPI specification (v5.1 onwards) introduces
alternative methods to CST and PSS. These new mechanisms
are described within each ACPI Processor object and so they
need to be scanned whenever a new Processor object is detected.
This patch introduces two new Kconfig symbols to allow for
finer configurability among the various options for controlling
CPU idle and performance states. There is no change in functionality
and these options are defaulted to enabled to maintain previous
behaviour.
The following patchwork introduces CPPC: A newer method of
controlling CPU performance. The OS is not expected to support CPPC
and PSS at runtime. So the kconfig option lets us make these two
mutually exclusive at compile time.
Signed-off-by: Ashwin Chaugule <ashwin.chaugule@xxxxxxxxxx>
Reviewed-by: Al Stone <al.stone@xxxxxxxxxx>
---
drivers/acpi/Kconfig | 31 +++++++++--
drivers/acpi/Makefile | 7 ++-
drivers/acpi/processor_driver.c | 86 ++++++++++++++++++----------
drivers/cpufreq/Kconfig | 2 +-
drivers/cpufreq/Kconfig.x86 | 2 +
include/acpi/processor.h | 120
++++++++++++++++++++++++++++------------
6 files changed, 176 insertions(+), 72 deletions(-)
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index ab2cbb5..5942754 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -166,18 +166,39 @@ config ACPI_DOCK
This driver supports ACPI-controlled docking stations and
removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.
-config ACPI_PROCESSOR
- tristate "Processor"
- select THERMAL
- select CPU_IDLE
+config ACPI_CST
+ bool "ACPI C states (CST) driver"
+ depends on ACPI_PROCESSOR
depends on X86 || IA64
+ select CPU_IDLE
default y
help
This driver installs ACPI as the idle handler for Linux and
uses
ACPI C2 and C3 processor states to save power on systems that
- support it. It is required by several flavors of cpufreq
+ support it.
+
+config ACPI_PSS
+ bool "ACPI P States (PSS) driver"
+ depends on ACPI_PROCESSOR
+ depends on X86 || IA64
+ select THERMAL
+ default y
+ help
+ This driver implements ACPI methods for controlling CPU
performance
+ using PSS methods as described in the ACPI spec. It also enables
support
+ for ACPI based performance throttling (TSS) and ACPI based
thermal
+ monitoring. It is required by several flavors of cpufreq
performance-state drivers.
For starters, I don't like these new Kconfig options.
Isn't there a way to implement what you need without adding them?
We need to use the ACPI Processor driver for CPPC without including
all its current dependencies. (i.e. PSS, TSS, CSS etc.). The upcoming
LPI work from Sudeep will also face the same issue.
Ashwin, I am trying to keep Kconfig options minimum, iff necessary and
selected by ARCH code(i.e. not user selectable). Also I am not entirely
sure if we need to make PSS and CPPC mutually exclusive.
Agree. Moving this to ARCH does seem like a better option. I need to
explore that some more. Per the ACPI spec, the OS is not expected to
support PSS and CPPC at runtime. I want to avoid getting into
whitelist/blacklist issues which would be inevitable if we keep both
available at runtime. Some of the X86 drivers run into this already.
OK, but as you say, both still be enabled statically while only one of
then should be active at run-time.
I had seen patches to support PSS on ARM and if we have to support
single Image to handle both they can't be exclusive.
Theres been one attempt about 1.5 years ago and AFAIK those folks have
completely backed out of the ARM64 Server space . ;) We can revisit
when someone proposes a more recent solution for PSS on ARM64. It
shouldn't be too hard to change the Kconfig dependencies accordingly.
While I too can only guess that they have backed off, since CPPC
requires firmware, and if the hardware has PSS like interface, I can
imagine vendors pushing for that for convenience, so I would not rule
that out completely. But I agree as along as it can be changed easily,
we can defer that until there's a real hardware.
Regards,
Sudeep
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
