Thanks for your comment. > -----Original Message----- > From: platform-driver-x86-owner@xxxxxxxxxxxxxxx [mailto:platform-driver-x86-owner@xxxxxxxxxxxxxxx] On Behalf Of Jesper > Dangaard Brouer > Sent: Wednesday, June 24, 2015 10:41 PM > To: Izumi, Taku/泉 拓 > Cc: brouer@xxxxxxxxxx; netdev@xxxxxxxxxxxxxxx; platform-driver-x86@xxxxxxxxxxxxxxx; dvhart@xxxxxxxxxxxxx; > rkhan@xxxxxxxxxx; alexander.h.duyck@xxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx; joe@xxxxxxxxxxx; yasu.isimatu@xxxxxxxxx > Subject: Re: [PATCH v2 00/22] FUJITSU Extended Socket network device driver > > On Wed, 24 Jun 2015 11:52:31 +0900 > Taku Izumi <izumi.taku@xxxxxxxxxxxxxx> wrote: > > > This patchsets adds FUJITSU Extended Socket network device driver. > > Extended Socket network device is a shared memory based high-speed network > > interface between Extended Partitions of PRIMEQUEST 2000 E2 series. > > > > You can get some information about Extended Partition and Extended > > Socket by referring the following manual. > > > > http://globalsp.ts.fujitsu.com/dmsp/Publications/public/CA92344-0537.pdf > > 3.2.1 Extended Partitioning > > 3.2.2 Extended Socket > > > > v1 -> v2: > > - Location change > > drivers/platform/x86 => driver/net > > Could/should this driver be placed under driver/net/ethernet/fujitsu ?? > > You are using Ethernet addresses but they are kind of special, always > 02:00:00:00:00:xx which is hard-coded... maybe I misunderstand the > code/hw and it is not Ethernet? "Extended Socket network device" doesn't necessitate real (physical) Ethernet card. There's no Ethernet card, so I'm not quite sure I can put this code under driver/net/ethernet. I thought this driver is analogous with "vmxnet3" or "hyperv", so I put at driver/net. If it's no problem to put it under driver/net/ethernet, I'm ready to migrate it. Sincerely, Taku Izumi > > [...] > > drivers/net/fjes/Makefile | 31 + > > drivers/net/fjes/fjes.h | 77 +++ > > drivers/net/fjes/fjes_ethtool.c | 135 ++++ > > drivers/net/fjes/fjes_hw.c | 1122 +++++++++++++++++++++++++++++++ > > drivers/net/fjes/fjes_hw.h | 333 ++++++++++ > > drivers/net/fjes/fjes_main.c | 1397 +++++++++++++++++++++++++++++++++++++++ > > drivers/net/fjes/fjes_regs.h | 142 ++++ > > 9 files changed, 3246 insertions(+) > > create mode 100644 drivers/net/fjes/Makefile > > create mode 100644 drivers/net/fjes/fjes.h > > create mode 100644 drivers/net/fjes/fjes_ethtool.c > > create mode 100644 drivers/net/fjes/fjes_hw.c > > create mode 100644 drivers/net/fjes/fjes_hw.h > > create mode 100644 drivers/net/fjes/fjes_main.c > > create mode 100644 drivers/net/fjes/fjes_regs.h > > > > > > -- > Best regards, > Jesper Dangaard Brouer > MSc.CS, Sr. Network Kernel Developer at Red Hat > Author of http://www.iptv-analyzer.org > LinkedIn: http://www.linkedin.com/in/brouer > -- > To unsubscribe from this list: send the line "unsubscribe platform-driver-x86" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
