On 27/04/15 16:01, Octavian Purdila wrote:
> This patch derives the mounting matrix for a particular IIO device
> based ont the ACPI _PLD information. Note that if mounting matrix is
> defined in the device properties it overrieds the _PLD information.
>
> Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
I have no objection to the functionality, but I'd prefer to separate it more
from the core of IIO. By all means have some utility functions to help with
what may be a common feature in future, but I don't want to have the data
stored in the main IIO structures. It's not relevant to lots of our devices
afterall!
Reading this (still offline unfortunately), looks like the ACPI provided data
is very very minimalist. Parts have to be on the panel and oriented at 90
degree increments? I suppose it covers a fair range of common hardware devices,
but far from all of them.
I'm not considerably more keen on the IIO interface as a substantial superset
of what ACPI is providing. Note that we should definitely discuss with
input (joysticks can have mounting matrices too!)
cc'd. Sorry Dmitry, think I managed to pick up an ancient version of your
email address for an earlier cc. Was being lazy and didn't check in MAINTAINERS.
Jonathan
> ---
> drivers/iio/industrialio-core.c | 51 +++++++++++++++++++++++++++++++++++++++++
> include/linux/iio/iio.h | 46 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+)
>
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index 9000c53..90ee58a 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -31,6 +31,7 @@
> #include <linux/iio/sysfs.h>
> #include <linux/iio/events.h>
> #include <linux/iio/buffer.h>
> +#include <linux/acpi.h>
>
> /* IDA to assign each registered device a unique id */
> static DEFINE_IDA(iio_ida);
> @@ -871,6 +872,53 @@ static ssize_t iio_show_dev_name(struct device *dev,
>
> static DEVICE_ATTR(name, S_IRUGO, iio_show_dev_name, NULL);
>
> +#if IS_ENABLED(CONFIG_ACPI)
> +static bool iio_get_mounting_matrix_acpi(struct iio_dev *indio_dev)
> +{
> + acpi_handle h = ACPI_HANDLE(indio_dev->dev.parent);
> + struct acpi_pld_info *info;
> +
> + if (ACPI_SUCCESS(acpi_get_physical_device_location(h, &info))) {
> + IIO_MM_SET(indio_dev->mounting_matrix, X, X, 1, 0);
> + IIO_MM_SET(indio_dev->mounting_matrix, Y, Y, 1, 0);
> + IIO_MM_SET(indio_dev->mounting_matrix, Z, Z, 1, 0);
> +
> + /* Chip placed on the back panel ; negate x and z */
> + if (info->panel == ACPI_PLD_PANEL_BACK) {
> + IIO_MM_MUL(indio_dev->mounting_matrix, X, X, -1, 0);
> + IIO_MM_MUL(indio_dev->mounting_matrix, Z, Z, -1, 0);
> + }
> +
> + switch (info->rotation) {
> + case 2:
> + /* 90 deg clockwise: negate y then swap x,y */
> + IIO_MM_MUL(indio_dev->mounting_matrix, Y, Y, -1, 0);
> + IIO_MM_SWAP(indio_dev->mounting_matrix, X, Y);
> + break;
> + case 4:
> + /* Upside down: negate x and y */
> + IIO_MM_MUL(indio_dev->mounting_matrix, X, X, -1, 0);
> + IIO_MM_MUL(indio_dev->mounting_matrix, Y, Y, -1, 0);
> + break;
> + case 6:
> + /* 90 deg counter clockwise: negate x then swap x,y */
> + IIO_MM_MUL(indio_dev->mounting_matrix, X, X, -1, 0);
> + IIO_MM_SWAP(indio_dev->mounting_matrix, X, Y);
> + break;
> + }
> +
> + return true;
> + }
> +
> + return false;
> +}
> +#else
> +static bool iio_get_mounting_matrix_acpi(struct iio_dev *indio_dev)
> +{
> + return false;
> +}
> +#endif
> +
> static bool iio_get_mounting_matrix(struct iio_dev *indio_dev)
> {
> int i, err;
> @@ -888,6 +936,9 @@ static bool iio_get_mounting_matrix(struct iio_dev *indio_dev)
> return true;
> }
>
> + if (ACPI_HANDLE(indio_dev->dev.parent))
> + return iio_get_mounting_matrix_acpi(indio_dev);
> +
> return false;
> }
>
> diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
> index c1fa852..feb7813 100644
> --- a/include/linux/iio/iio.h
> +++ b/include/linux/iio/iio.h
> @@ -436,6 +436,52 @@ struct iio_buffer_setup_ops {
>
> #define IIO_MM_SIZE 18
>
> +enum {
> + IIO_MM_XX0,
> + IIO_MM_XX1,
> + IIO_MM_XY0,
> + IIO_MM_XY1,
> + IIO_MM_XZ0,
> + IIO_MM_XZ1,
> + IIO_MM_YX0,
> + IIO_MM_YX1,
> + IIO_MM_YY0,
> + IIO_MM_YY1,
> + IIO_MM_YZ0,
> + IIO_MM_YZ1,
> + IIO_MM_ZX0,
> + IIO_MM_ZX1,
> + IIO_MM_ZY0,
> + IIO_MM_ZY1,
> + IIO_MM_ZZ0,
> + IIO_MM_ZZ1,
> +};
> +
> +#define IIO_MM_SET(mm, a, b, val0, val1) \
> + do { \
> + mm[IIO_MM_##a##b##0] = val0; \
> + mm[IIO_MM_##a##b##1] = val1; \
> + } while (0) \
> +
> +#define IIO_MM_MUL(mm, a, b, val0, val1) \
> + do { \
> + mm[IIO_MM_##a##b##0] *= val0; \
> + mm[IIO_MM_##a##b##0] *= val1; \
> + } while (0) \
> +
> +#define IIO_MM_SWAP(mm, x, y) \
> + do { \
> + int tmp; \
> + \
> + tmp = mm[IIO_MM_##x##x##0]; \
> + mm[IIO_MM_##x##x##0] = mm[IIO_MM_##y##y##0]; \
> + mm[IIO_MM_##y##y##0] = tmp; \
> + \
> + tmp = mm[IIO_MM_##x##x##1]; \
> + mm[IIO_MM_##x##x##1] = mm[IIO_MM_##y##y##1]; \
> + mm[IIO_MM_##y##y##1] = tmp; \
> + } while (0) \
> +
> /**
> * struct iio_dev - industrial I/O device
> * @id: [INTERN] used to identify device internally
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
