Re: [PATCH v9 02/21] ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday, February 25, 2015 04:39:42 PM Hanjun Guo wrote:
> CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor,
> but phys_id is used as int in acpi processor driver, so it will lead to
> some inconsistence for the drivers.
> 
> Furthermore, to cater for ACPI arch ports that implement 64 bits CPU
> ids a generic CPU physical id type is required.
> 
> So introduce typedef u32 phys_cpuid_t for x86 and ia64, and introduce
> a macro CPU_PHYS_ID_INVALID as (u32)(-1), use phys_cpuid_t when phys_id
> defined in acpi processor driver, and replace CPU_PHYS_ID_INVALID as -1
> for phys_id, this will solve the inconsistence in acpi processor driver,
> and will prepare for the ACPI on ARM64 too.
> 
> CC: Rafael J Wysocki <rjw@xxxxxxxxxxxxx>
> Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Acked-by: Sudeep Holla <sudeep.holla@xxxxxxx>
> Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
> [hj: reworked cpu physid map return codes]
> Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
> ---
>  arch/ia64/include/asm/acpi.h  |  4 ++++
>  arch/ia64/kernel/acpi.c       |  2 +-
>  arch/x86/include/asm/acpi.h   |  4 ++++
>  arch/x86/kernel/acpi/boot.c   |  2 +-
>  drivers/acpi/acpi_processor.c |  7 ++++---
>  drivers/acpi/processor_core.c | 30 +++++++++++++++---------------
>  include/acpi/processor.h      |  6 +++---
>  include/linux/acpi.h          |  2 +-
>  8 files changed, 33 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
> index a1d91ab..ca1f0e4 100644
> --- a/arch/ia64/include/asm/acpi.h
> +++ b/arch/ia64/include/asm/acpi.h
> @@ -34,6 +34,10 @@
>  #include <linux/numa.h>
>  #include <asm/numa.h>
>  
> +typedef u32 phys_cpuid_t;
> +
> +#define CPU_PHYS_ID_INVALID (u32)(-1)
> +
>  #ifdef	CONFIG_ACPI
>  extern int acpi_lapic;
>  #define acpi_disabled 0	/* ACPI always enabled on IA64 */
> diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
> index 2c44989..067ef44 100644
> --- a/arch/ia64/kernel/acpi.c
> +++ b/arch/ia64/kernel/acpi.c
> @@ -887,7 +887,7 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
>  }
>  
>  /* wrapper to silence section mismatch warning */
> -int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
> +int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
>  {
>  	return _acpi_map_lsapic(handle, physid, pcpu);
>  }
> diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
> index 3a45668..cd788dd 100644
> --- a/arch/x86/include/asm/acpi.h
> +++ b/arch/x86/include/asm/acpi.h
> @@ -32,6 +32,10 @@
>  #include <asm/mpspec.h>
>  #include <asm/realmode.h>
>  
> +typedef u32 phys_cpuid_t;
> +
> +#define CPU_PHYS_ID_INVALID (u32)(-1)

Can we define those things in one common place instead of having to duplicate
the definitions for every arch?

Also, I'd like to have

static inline bool invalid_cpu_phys_id(phys_cpuid_t phys_id)
{
	return (int)phys_id < 0;
}

as that would cover error codes too.

Moreover, why don't you use (phys_cpuid_t)(-1) in the #define?  And call is
PHYS_CPUID_INVALID for that matter (so that the name of the symbol corresponds
to the name of the type)?


> +
>  #ifdef CONFIG_ACPI
>  extern int acpi_lapic;
>  extern int acpi_ioapic;
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index 3d525c6..e4f8582 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -757,7 +757,7 @@ static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
>  }
>  
>  /* wrapper to silence section mismatch warning */
> -int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
> +int __ref acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
>  {
>  	return _acpi_map_lsapic(handle, physid, pcpu);
>  }
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index 1020b1b..e6c7c56 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  	acpi_status status;
>  	int ret;
>  
> -	if (pr->phys_id == -1)
> +	if (pr->phys_id == CPU_PHYS_ID_INVALID)
>  		return -ENODEV;
>  
>  	status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta);
> @@ -215,7 +215,8 @@ static int acpi_processor_get_info(struct acpi_device *device)
>  	union acpi_object object = { 0 };
>  	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
>  	struct acpi_processor *pr = acpi_driver_data(device);
> -	int phys_id, cpu_index, device_declaration = 0;
> +	phys_cpuid_t phys_id;
> +	int cpu_index, device_declaration = 0;
>  	acpi_status status = AE_OK;
>  	static int cpu0_initialized;
>  	unsigned long long value;
> @@ -263,7 +264,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
>  	}
>  
>  	phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id);
> -	if (phys_id < 0)
> +	if (phys_id == CPU_PHYS_ID_INVALID)
>  		acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n");
>  	pr->phys_id = phys_id;
>  
> diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
> index 7962651..a5547dc 100644
> --- a/drivers/acpi/processor_core.c
> +++ b/drivers/acpi/processor_core.c
> @@ -32,7 +32,7 @@ static struct acpi_table_madt *get_madt_table(void)
>  }
>  
>  static int map_lapic_id(struct acpi_subtable_header *entry,
> -		 u32 acpi_id, int *apic_id)
> +		 u32 acpi_id, phys_cpuid_t *apic_id)
>  {
>  	struct acpi_madt_local_apic *lapic =
>  		container_of(entry, struct acpi_madt_local_apic, header);
> @@ -48,7 +48,7 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
>  }
>  
>  static int map_x2apic_id(struct acpi_subtable_header *entry,
> -			 int device_declaration, u32 acpi_id, int *apic_id)
> +		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
>  {
>  	struct acpi_madt_local_x2apic *apic =
>  		container_of(entry, struct acpi_madt_local_x2apic, header);
> @@ -65,7 +65,7 @@ static int map_x2apic_id(struct acpi_subtable_header *entry,
>  }
>  
>  static int map_lsapic_id(struct acpi_subtable_header *entry,
> -		int device_declaration, u32 acpi_id, int *apic_id)
> +		int device_declaration, u32 acpi_id, phys_cpuid_t *apic_id)
>  {
>  	struct acpi_madt_local_sapic *lsapic =
>  		container_of(entry, struct acpi_madt_local_sapic, header);
> @@ -83,10 +83,10 @@ static int map_lsapic_id(struct acpi_subtable_header *entry,
>  	return 0;
>  }
>  
> -static int map_madt_entry(int type, u32 acpi_id)
> +static phys_cpuid_t map_madt_entry(int type, u32 acpi_id)
>  {
>  	unsigned long madt_end, entry;
> -	int phys_id = -1;	/* CPU hardware ID */
> +	phys_cpuid_t phys_id = CPU_PHYS_ID_INVALID;	/* CPU hardware ID */
>  	struct acpi_table_madt *madt;
>  
>  	madt = get_madt_table();
> @@ -117,12 +117,12 @@ static int map_madt_entry(int type, u32 acpi_id)
>  	return phys_id;
>  }
>  
> -static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
> +static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
>  {
>  	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
>  	union acpi_object *obj;
>  	struct acpi_subtable_header *header;
> -	int phys_id = -1;
> +	phys_cpuid_t phys_id = CPU_PHYS_ID_INVALID;
>  
>  	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
>  		goto exit;
> @@ -149,27 +149,27 @@ exit:
>  	return phys_id;
>  }
>  
> -int acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
> +phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id)
>  {
> -	int phys_id;
> +	phys_cpuid_t phys_id;
>  
>  	phys_id = map_mat_entry(handle, type, acpi_id);
> -	if (phys_id == -1)
> +	if (phys_id == CPU_PHYS_ID_INVALID)
>  		phys_id = map_madt_entry(type, acpi_id);
>  
>  	return phys_id;
>  }
>  
> -int acpi_map_cpuid(int phys_id, u32 acpi_id)
> +int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id)
>  {
>  #ifdef CONFIG_SMP
>  	int i;
>  #endif
>  
> -	if (phys_id == -1) {
> +	if (phys_id == CPU_PHYS_ID_INVALID) {
>  		/*
>  		 * On UP processor, there is no _MAT or MADT table.
> -		 * So above phys_id is always set to -1.
> +		 * So above phys_id is always set to CPU_PHYS_ID_INVALID.
>  		 *
>  		 * BIOS may define multiple CPU handles even for UP processor.
>  		 * For example,
> @@ -190,7 +190,7 @@ int acpi_map_cpuid(int phys_id, u32 acpi_id)
>  		if (nr_cpu_ids <= 1 && acpi_id == 0)
>  			return acpi_id;
>  		else
> -			return phys_id;
> +			return -1;

Can we use a proper error code here?

>  	}
>  
>  #ifdef CONFIG_SMP


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux