[PATCH 1/7] ia64: ACPI: move kernel acpi files to a directory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Al Stone <ahs3@xxxxxxxxxx>

In preparation for adding some additional arch-dependent ACPI files,
move the existing ones to a directory to try to keep clutter down in
the arch/ia64/kernel directory.

There is no functional change.  This patch only moves source files.

Signed-off-by: Al Stone <al.stone@xxxxxxxxxx>
---
 arch/ia64/kernel/Makefile        |    2 +-
 arch/ia64/kernel/acpi-ext.c      |  104 ----
 arch/ia64/kernel/acpi.c          | 1000 --------------------------------------
 arch/ia64/kernel/acpi/Makefile   |    1 +
 arch/ia64/kernel/acpi/acpi-ext.c |  104 ++++
 arch/ia64/kernel/acpi/acpi.c     | 1000 ++++++++++++++++++++++++++++++++++++++
 6 files changed, 1106 insertions(+), 1105 deletions(-)
 delete mode 100644 arch/ia64/kernel/acpi-ext.c
 delete mode 100644 arch/ia64/kernel/acpi.c
 create mode 100644 arch/ia64/kernel/acpi/Makefile
 create mode 100644 arch/ia64/kernel/acpi/acpi-ext.c
 create mode 100644 arch/ia64/kernel/acpi/acpi.c

diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 20678a9..2218842 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -13,7 +13,7 @@ obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64
 	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
 	 unwind.o mca.o mca_asm.o topology.o dma-mapping.o
 
-obj-$(CONFIG_ACPI)		+= acpi.o acpi-ext.o
+obj-y				+= acpi/
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 
 obj-$(CONFIG_IA64_PALINFO)	+= palinfo.o
diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c
deleted file mode 100644
index 8b9318d..0000000
--- a/arch/ia64/kernel/acpi-ext.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
- *	Alex Williamson <alex.williamson@xxxxxx>
- *	Bjorn Helgaas <bjorn.helgaas@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/acpi.h>
-
-#include <asm/acpi-ext.h>
-
-/*
- * Device CSRs that do not appear in PCI config space should be described
- * via ACPI.  This would normally be done with Address Space Descriptors
- * marked as "consumer-only," but old versions of Windows and Linux ignore
- * the producer/consumer flag, so HP invented a vendor-defined resource to
- * describe the location and size of CSR space.
- */
-
-struct acpi_vendor_uuid hp_ccsr_uuid = {
-	.subtype = 2,
-	.data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a,
-	    0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad },
-};
-
-static acpi_status hp_ccsr_locate(acpi_handle obj, u64 *base, u64 *length)
-{
-	acpi_status status;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	struct acpi_resource *resource;
-	struct acpi_resource_vendor_typed *vendor;
-
-	status = acpi_get_vendor_resource(obj, METHOD_NAME__CRS, &hp_ccsr_uuid,
-		&buffer);
-
-	resource = buffer.pointer;
-	vendor = &resource->data.vendor_typed;
-
-	if (ACPI_FAILURE(status) || vendor->byte_length < 16) {
-		status = AE_NOT_FOUND;
-		goto exit;
-	}
-
-	memcpy(base, vendor->byte_data, sizeof(*base));
-	memcpy(length, vendor->byte_data + 8, sizeof(*length));
-
-  exit:
-	kfree(buffer.pointer);
-	return status;
-}
-
-struct csr_space {
-	u64	base;
-	u64	length;
-};
-
-static acpi_status find_csr_space(struct acpi_resource *resource, void *data)
-{
-	struct csr_space *space = data;
-	struct acpi_resource_address64 addr;
-	acpi_status status;
-
-	status = acpi_resource_to_address64(resource, &addr);
-	if (ACPI_SUCCESS(status) &&
-	    addr.resource_type == ACPI_MEMORY_RANGE &&
-	    addr.address_length &&
-	    addr.producer_consumer == ACPI_CONSUMER) {
-		space->base = addr.minimum;
-		space->length = addr.address_length;
-		return AE_CTRL_TERMINATE;
-	}
-	return AE_OK;		/* keep looking */
-}
-
-static acpi_status hp_crs_locate(acpi_handle obj, u64 *base, u64 *length)
-{
-	struct csr_space space = { 0, 0 };
-
-	acpi_walk_resources(obj, METHOD_NAME__CRS, find_csr_space, &space);
-	if (!space.length)
-		return AE_NOT_FOUND;
-
-	*base = space.base;
-	*length = space.length;
-	return AE_OK;
-}
-
-acpi_status hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
-{
-	acpi_status status;
-
-	status = hp_ccsr_locate(obj, csr_base, csr_length);
-	if (ACPI_SUCCESS(status))
-		return status;
-
-	return hp_crs_locate(obj, csr_base, csr_length);
-}
-EXPORT_SYMBOL(hp_acpi_csr_space);
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
deleted file mode 100644
index e795cb8..0000000
--- a/arch/ia64/kernel/acpi.c
+++ /dev/null
@@ -1,1000 +0,0 @@
-/*
- *  acpi.c - Architecture-Specific Low-Level ACPI Support
- *
- *  Copyright (C) 1999 VA Linux Systems
- *  Copyright (C) 1999,2000 Walt Drummond <drummond@xxxxxxxxxxx>
- *  Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
- *	David Mosberger-Tang <davidm@xxxxxxxxxx>
- *  Copyright (C) 2000 Intel Corp.
- *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@xxxxxxxxx>
- *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@xxxxxxxxx>
- *  Copyright (C) 2001 Jenna Hall <jenna.s.hall@xxxxxxxxx>
- *  Copyright (C) 2001 Takayoshi Kochi <t-kochi@xxxxxxxxxxxxx>
- *  Copyright (C) 2002 Erich Focht <efocht@xxxxxxxxxx>
- *  Copyright (C) 2004 Ashok Raj <ashok.raj@xxxxxxxxx>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/acpi.h>
-#include <linux/efi.h>
-#include <linux/mmzone.h>
-#include <linux/nodemask.h>
-#include <linux/slab.h>
-#include <acpi/processor.h>
-#include <asm/io.h>
-#include <asm/iosapic.h>
-#include <asm/machvec.h>
-#include <asm/page.h>
-#include <asm/numa.h>
-#include <asm/sal.h>
-#include <asm/cyclone.h>
-
-#define PREFIX			"ACPI: "
-
-int acpi_lapic;
-unsigned int acpi_cpei_override;
-unsigned int acpi_cpei_phys_cpuid;
-
-unsigned long acpi_wakeup_address = 0;
-
-#ifdef CONFIG_IA64_GENERIC
-static unsigned long __init acpi_find_rsdp(void)
-{
-	unsigned long rsdp_phys = 0;
-
-	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
-		rsdp_phys = efi.acpi20;
-	else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
-		printk(KERN_WARNING PREFIX
-		       "v1.0/r0.71 tables no longer supported\n");
-	return rsdp_phys;
-}
-
-const char __init *
-acpi_get_sysname(void)
-{
-	unsigned long rsdp_phys;
-	struct acpi_table_rsdp *rsdp;
-	struct acpi_table_xsdt *xsdt;
-	struct acpi_table_header *hdr;
-#ifdef CONFIG_INTEL_IOMMU
-	u64 i, nentries;
-#endif
-
-	rsdp_phys = acpi_find_rsdp();
-	if (!rsdp_phys) {
-		printk(KERN_ERR
-		       "ACPI 2.0 RSDP not found, default to \"dig\"\n");
-		return "dig";
-	}
-
-	rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys);
-	if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) {
-		printk(KERN_ERR
-		       "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
-		return "dig";
-	}
-
-	xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address);
-	hdr = &xsdt->header;
-	if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) {
-		printk(KERN_ERR
-		       "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
-		return "dig";
-	}
-
-	if (!strcmp(hdr->oem_id, "HP")) {
-		return "hpzx1";
-	} else if (!strcmp(hdr->oem_id, "SGI")) {
-		if (!strcmp(hdr->oem_table_id + 4, "UV"))
-			return "uv";
-		else
-			return "sn2";
-	}
-
-#ifdef CONFIG_INTEL_IOMMU
-	/* Look for Intel IOMMU */
-	nentries = (hdr->length - sizeof(*hdr)) /
-			 sizeof(xsdt->table_offset_entry[0]);
-	for (i = 0; i < nentries; i++) {
-		hdr = __va(xsdt->table_offset_entry[i]);
-		if (strncmp(hdr->signature, ACPI_SIG_DMAR,
-			sizeof(ACPI_SIG_DMAR) - 1) == 0)
-			return "dig_vtd";
-	}
-#endif
-
-	return "dig";
-}
-#endif /* CONFIG_IA64_GENERIC */
-
-#define ACPI_MAX_PLATFORM_INTERRUPTS	256
-
-/* Array to record platform interrupt vectors for generic interrupt routing. */
-int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
-	[0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
-};
-
-enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
-
-/*
- * Interrupt routing API for device drivers.  Provides interrupt vector for
- * a generic platform event.  Currently only CPEI is implemented.
- */
-int acpi_request_vector(u32 int_type)
-{
-	int vector = -1;
-
-	if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
-		/* corrected platform error interrupt */
-		vector = platform_intr_list[int_type];
-	} else
-		printk(KERN_ERR
-		       "acpi_request_vector(): invalid interrupt type\n");
-	return vector;
-}
-
-char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
-{
-	return __va(phys_addr);
-}
-
-void __init __acpi_unmap_table(char *map, unsigned long size)
-{
-}
-
-/* --------------------------------------------------------------------------
-                            Boot-time Table Parsing
-   -------------------------------------------------------------------------- */
-
-static int available_cpus __initdata;
-struct acpi_table_madt *acpi_madt __initdata;
-static u8 has_8259;
-
-static int __init
-acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
-			  const unsigned long end)
-{
-	struct acpi_madt_local_apic_override *lapic;
-
-	lapic = (struct acpi_madt_local_apic_override *)header;
-
-	if (BAD_MADT_ENTRY(lapic, end))
-		return -EINVAL;
-
-	if (lapic->address) {
-		iounmap(ipi_base_addr);
-		ipi_base_addr = ioremap(lapic->address, 0);
-	}
-	return 0;
-}
-
-static int __init
-acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end)
-{
-	struct acpi_madt_local_sapic *lsapic;
-
-	lsapic = (struct acpi_madt_local_sapic *)header;
-
-	/*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
-
-	if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
-#ifdef CONFIG_SMP
-		smp_boot_data.cpu_phys_id[available_cpus] =
-		    (lsapic->id << 8) | lsapic->eid;
-#endif
-		++available_cpus;
-	}
-
-	total_cpus++;
-	return 0;
-}
-
-static int __init
-acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
-{
-	struct acpi_madt_local_apic_nmi *lacpi_nmi;
-
-	lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
-
-	if (BAD_MADT_ENTRY(lacpi_nmi, end))
-		return -EINVAL;
-
-	/* TBD: Support lapic_nmi entries */
-	return 0;
-}
-
-static int __init
-acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end)
-{
-	struct acpi_madt_io_sapic *iosapic;
-
-	iosapic = (struct acpi_madt_io_sapic *)header;
-
-	if (BAD_MADT_ENTRY(iosapic, end))
-		return -EINVAL;
-
-	return iosapic_init(iosapic->address, iosapic->global_irq_base);
-}
-
-static unsigned int __initdata acpi_madt_rev;
-
-static int __init
-acpi_parse_plat_int_src(struct acpi_subtable_header * header,
-			const unsigned long end)
-{
-	struct acpi_madt_interrupt_source *plintsrc;
-	int vector;
-
-	plintsrc = (struct acpi_madt_interrupt_source *)header;
-
-	if (BAD_MADT_ENTRY(plintsrc, end))
-		return -EINVAL;
-
-	/*
-	 * Get vector assignment for this interrupt, set attributes,
-	 * and program the IOSAPIC routing table.
-	 */
-	vector = iosapic_register_platform_intr(plintsrc->type,
-						plintsrc->global_irq,
-						plintsrc->io_sapic_vector,
-						plintsrc->eid,
-						plintsrc->id,
-						((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
-						 ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
-						IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
-						((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
-						 ACPI_MADT_TRIGGER_EDGE) ?
-						IOSAPIC_EDGE : IOSAPIC_LEVEL);
-
-	platform_intr_list[plintsrc->type] = vector;
-	if (acpi_madt_rev > 1) {
-		acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
-	}
-
-	/*
-	 * Save the physical id, so we can check when its being removed
-	 */
-	acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;
-
-	return 0;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-unsigned int can_cpei_retarget(void)
-{
-	extern int cpe_vector;
-	extern unsigned int force_cpei_retarget;
-
-	/*
-	 * Only if CPEI is supported and the override flag
-	 * is present, otherwise return that its re-targettable
-	 * if we are in polling mode.
-	 */
-	if (cpe_vector > 0) {
-		if (acpi_cpei_override || force_cpei_retarget)
-			return 1;
-		else
-			return 0;
-	}
-	return 1;
-}
-
-unsigned int is_cpu_cpei_target(unsigned int cpu)
-{
-	unsigned int logical_id;
-
-	logical_id = cpu_logical_id(acpi_cpei_phys_cpuid);
-
-	if (logical_id == cpu)
-		return 1;
-	else
-		return 0;
-}
-
-void set_cpei_target_cpu(unsigned int cpu)
-{
-	acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
-}
-#endif
-
-unsigned int get_cpei_target_cpu(void)
-{
-	return acpi_cpei_phys_cpuid;
-}
-
-static int __init
-acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
-		       const unsigned long end)
-{
-	struct acpi_madt_interrupt_override *p;
-
-	p = (struct acpi_madt_interrupt_override *)header;
-
-	if (BAD_MADT_ENTRY(p, end))
-		return -EINVAL;
-
-	iosapic_override_isa_irq(p->source_irq, p->global_irq,
-				 ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
-				  ACPI_MADT_POLARITY_ACTIVE_LOW) ?
-				 IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH,
-				 ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
-				 ACPI_MADT_TRIGGER_LEVEL) ?
-				 IOSAPIC_LEVEL : IOSAPIC_EDGE);
-	return 0;
-}
-
-static int __init
-acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
-{
-	struct acpi_madt_nmi_source *nmi_src;
-
-	nmi_src = (struct acpi_madt_nmi_source *)header;
-
-	if (BAD_MADT_ENTRY(nmi_src, end))
-		return -EINVAL;
-
-	/* TBD: Support nimsrc entries */
-	return 0;
-}
-
-static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) {
-
-		/*
-		 * Unfortunately ITC_DRIFT is not yet part of the
-		 * official SAL spec, so the ITC_DRIFT bit is not
-		 * set by the BIOS on this hardware.
-		 */
-		sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
-
-		cyclone_setup();
-	}
-}
-
-static int __init acpi_parse_madt(struct acpi_table_header *table)
-{
-	if (!table)
-		return -EINVAL;
-
-	acpi_madt = (struct acpi_table_madt *)table;
-
-	acpi_madt_rev = acpi_madt->header.revision;
-
-	/* remember the value for reference after free_initmem() */
-#ifdef CONFIG_ITANIUM
-	has_8259 = 1;		/* Firmware on old Itanium systems is broken */
-#else
-	has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT;
-#endif
-	iosapic_system_init(has_8259);
-
-	/* Get base address of IPI Message Block */
-
-	if (acpi_madt->address)
-		ipi_base_addr = ioremap(acpi_madt->address, 0);
-
-	printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
-
-	acpi_madt_oem_check(acpi_madt->header.oem_id,
-			    acpi_madt->header.oem_table_id);
-
-	return 0;
-}
-
-#ifdef CONFIG_ACPI_NUMA
-
-#undef SLIT_DEBUG
-
-#define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
-
-static int __initdata srat_num_cpus;	/* number of cpus */
-static u32 pxm_flag[PXM_FLAG_LEN];
-#define pxm_bit_set(bit)	(set_bit(bit,(void *)pxm_flag))
-#define pxm_bit_test(bit)	(test_bit(bit,(void *)pxm_flag))
-static struct acpi_table_slit __initdata *slit_table;
-cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
-
-static int __init
-get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
-{
-	int pxm;
-
-	pxm = pa->proximity_domain_lo;
-	if (ia64_platform_is("sn2") || acpi_srat_revision >= 2)
-		pxm += pa->proximity_domain_hi[0] << 8;
-	return pxm;
-}
-
-static int __init
-get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
-{
-	int pxm;
-
-	pxm = ma->proximity_domain;
-	if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1)
-		pxm &= 0xff;
-
-	return pxm;
-}
-
-/*
- * ACPI 2.0 SLIT (System Locality Information Table)
- * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
- */
-void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
-{
-	u32 len;
-
-	len = sizeof(struct acpi_table_header) + 8
-	    + slit->locality_count * slit->locality_count;
-	if (slit->header.length != len) {
-		printk(KERN_ERR
-		       "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
-		       len, slit->header.length);
-		return;
-	}
-	slit_table = slit;
-}
-
-void __init
-acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
-{
-	int pxm;
-
-	if (!(pa->flags & ACPI_SRAT_CPU_ENABLED))
-		return;
-
-	if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) {
-		printk_once(KERN_WARNING
-			    "node_cpuid[%ld] is too small, may not be able to use all cpus\n",
-			    ARRAY_SIZE(node_cpuid));
-		return;
-	}
-	pxm = get_processor_proximity_domain(pa);
-
-	/* record this node in proximity bitmap */
-	pxm_bit_set(pxm);
-
-	node_cpuid[srat_num_cpus].phys_id =
-	    (pa->apic_id << 8) | (pa->local_sapic_eid);
-	/* nid should be overridden as logical node id later */
-	node_cpuid[srat_num_cpus].nid = pxm;
-	cpu_set(srat_num_cpus, early_cpu_possible_map);
-	srat_num_cpus++;
-}
-
-int __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
-{
-	unsigned long paddr, size;
-	int pxm;
-	struct node_memblk_s *p, *q, *pend;
-
-	pxm = get_memory_proximity_domain(ma);
-
-	/* fill node memory chunk structure */
-	paddr = ma->base_address;
-	size = ma->length;
-
-	/* Ignore disabled entries */
-	if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
-		return -1;
-
-	/* record this node in proximity bitmap */
-	pxm_bit_set(pxm);
-
-	/* Insertion sort based on base address */
-	pend = &node_memblk[num_node_memblks];
-	for (p = &node_memblk[0]; p < pend; p++) {
-		if (paddr < p->start_paddr)
-			break;
-	}
-	if (p < pend) {
-		for (q = pend - 1; q >= p; q--)
-			*(q + 1) = *q;
-	}
-	p->start_paddr = paddr;
-	p->size = size;
-	p->nid = pxm;
-	num_node_memblks++;
-	return 0;
-}
-
-void __init acpi_numa_arch_fixup(void)
-{
-	int i, j, node_from, node_to;
-
-	/* If there's no SRAT, fix the phys_id and mark node 0 online */
-	if (srat_num_cpus == 0) {
-		node_set_online(0);
-		node_cpuid[0].phys_id = hard_smp_processor_id();
-		return;
-	}
-
-	/*
-	 * MCD - This can probably be dropped now.  No need for pxm ID to node ID
-	 * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
-	 */
-	nodes_clear(node_online_map);
-	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
-		if (pxm_bit_test(i)) {
-			int nid = acpi_map_pxm_to_node(i);
-			node_set_online(nid);
-		}
-	}
-
-	/* set logical node id in memory chunk structure */
-	for (i = 0; i < num_node_memblks; i++)
-		node_memblk[i].nid = pxm_to_node(node_memblk[i].nid);
-
-	/* assign memory bank numbers for each chunk on each node */
-	for_each_online_node(i) {
-		int bank;
-
-		bank = 0;
-		for (j = 0; j < num_node_memblks; j++)
-			if (node_memblk[j].nid == i)
-				node_memblk[j].bank = bank++;
-	}
-
-	/* set logical node id in cpu structure */
-	for_each_possible_early_cpu(i)
-		node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
-
-	printk(KERN_INFO "Number of logical nodes in system = %d\n",
-	       num_online_nodes());
-	printk(KERN_INFO "Number of memory chunks in system = %d\n",
-	       num_node_memblks);
-
-	if (!slit_table) {
-		for (i = 0; i < MAX_NUMNODES; i++)
-			for (j = 0; j < MAX_NUMNODES; j++)
-				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
-							REMOTE_DISTANCE;
-		return;
-	}
-
-	memset(numa_slit, -1, sizeof(numa_slit));
-	for (i = 0; i < slit_table->locality_count; i++) {
-		if (!pxm_bit_test(i))
-			continue;
-		node_from = pxm_to_node(i);
-		for (j = 0; j < slit_table->locality_count; j++) {
-			if (!pxm_bit_test(j))
-				continue;
-			node_to = pxm_to_node(j);
-			node_distance(node_from, node_to) =
-			    slit_table->entry[i * slit_table->locality_count + j];
-		}
-	}
-
-#ifdef SLIT_DEBUG
-	printk("ACPI 2.0 SLIT locality table:\n");
-	for_each_online_node(i) {
-		for_each_online_node(j)
-		    printk("%03d ", node_distance(i, j));
-		printk("\n");
-	}
-#endif
-}
-#endif				/* CONFIG_ACPI_NUMA */
-
-/*
- * success: return IRQ number (>=0)
- * failure: return < 0
- */
-int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
-{
-	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
-		return gsi;
-
-	if (has_8259 && gsi < 16)
-		return isa_irq_to_vector(gsi);
-
-	return iosapic_register_intr(gsi,
-				     (polarity ==
-				      ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
-				     IOSAPIC_POL_LOW,
-				     (triggering ==
-				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
-				     IOSAPIC_LEVEL);
-}
-EXPORT_SYMBOL_GPL(acpi_register_gsi);
-
-void acpi_unregister_gsi(u32 gsi)
-{
-	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
-		return;
-
-	if (has_8259 && gsi < 16)
-		return;
-
-	iosapic_unregister_intr(gsi);
-}
-EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
-
-static int __init acpi_parse_fadt(struct acpi_table_header *table)
-{
-	struct acpi_table_header *fadt_header;
-	struct acpi_table_fadt *fadt;
-
-	if (!table)
-		return -EINVAL;
-
-	fadt_header = (struct acpi_table_header *)table;
-	if (fadt_header->revision != 3)
-		return -ENODEV;	/* Only deal with ACPI 2.0 FADT */
-
-	fadt = (struct acpi_table_fadt *)fadt_header;
-
-	acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
-				 ACPI_ACTIVE_LOW);
-	return 0;
-}
-
-int __init early_acpi_boot_init(void)
-{
-	int ret;
-
-	/*
-	 * do a partial walk of MADT to determine how many CPUs
-	 * we have including offline CPUs
-	 */
-	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
-		printk(KERN_ERR PREFIX "Can't find MADT\n");
-		return 0;
-	}
-
-	ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
-		acpi_parse_lsapic, NR_CPUS);
-	if (ret < 1)
-		printk(KERN_ERR PREFIX
-		       "Error parsing MADT - no LAPIC entries\n");
-	else
-		acpi_lapic = 1;
-
-#ifdef CONFIG_SMP
-	if (available_cpus == 0) {
-		printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
-		printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
-		smp_boot_data.cpu_phys_id[available_cpus] =
-		    hard_smp_processor_id();
-		available_cpus = 1;	/* We've got at least one of these, no? */
-	}
-	smp_boot_data.cpu_count = available_cpus;
-#endif
-	/* Make boot-up look pretty */
-	printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
-	       total_cpus);
-
-	return 0;
-}
-
-int __init acpi_boot_init(void)
-{
-
-	/*
-	 * MADT
-	 * ----
-	 * Parse the Multiple APIC Description Table (MADT), if exists.
-	 * Note that this table provides platform SMP configuration
-	 * information -- the successor to MPS tables.
-	 */
-
-	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
-		printk(KERN_ERR PREFIX "Can't find MADT\n");
-		goto skip_madt;
-	}
-
-	/* Local APIC */
-
-	if (acpi_table_parse_madt
-	    (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
-		printk(KERN_ERR PREFIX
-		       "Error parsing LAPIC address override entry\n");
-
-	if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
-	    < 0)
-		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
-
-	/* I/O APIC */
-
-	if (acpi_table_parse_madt
-	    (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
-		if (!ia64_platform_is("sn2"))
-			printk(KERN_ERR PREFIX
-			       "Error parsing MADT - no IOSAPIC entries\n");
-	}
-
-	/* System-Level Interrupt Routing */
-
-	if (acpi_table_parse_madt
-	    (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
-	     ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
-		printk(KERN_ERR PREFIX
-		       "Error parsing platform interrupt source entry\n");
-
-	if (acpi_table_parse_madt
-	    (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
-		printk(KERN_ERR PREFIX
-		       "Error parsing interrupt source overrides entry\n");
-
-	if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
-		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
-      skip_madt:
-
-	/*
-	 * FADT says whether a legacy keyboard controller is present.
-	 * The FADT also contains an SCI_INT line, by which the system
-	 * gets interrupts such as power and sleep buttons.  If it's not
-	 * on a Legacy interrupt, it needs to be setup.
-	 */
-	if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
-		printk(KERN_ERR PREFIX "Can't find FADT\n");
-
-#ifdef CONFIG_ACPI_NUMA
-#ifdef CONFIG_SMP
-	if (srat_num_cpus == 0) {
-		int cpu, i = 1;
-		for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
-			if (smp_boot_data.cpu_phys_id[cpu] !=
-			    hard_smp_processor_id())
-				node_cpuid[i++].phys_id =
-				    smp_boot_data.cpu_phys_id[cpu];
-	}
-#endif
-	build_cpu_to_node_map();
-#endif
-	return 0;
-}
-
-int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
-{
-	int tmp;
-
-	if (has_8259 && gsi < 16)
-		*irq = isa_irq_to_vector(gsi);
-	else {
-		tmp = gsi_to_irq(gsi);
-		if (tmp == -1)
-			return -1;
-		*irq = tmp;
-	}
-	return 0;
-}
-
-int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
-{
-	if (isa_irq >= 16)
-		return -1;
-	*gsi = isa_irq;
-	return 0;
-}
-
-/*
- *  ACPI based hotplug CPU support
- */
-#ifdef CONFIG_ACPI_HOTPLUG_CPU
-static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
-{
-#ifdef CONFIG_ACPI_NUMA
-	/*
-	 * We don't have cpu-only-node hotadd. But if the system equips
-	 * SRAT table, pxm is already found and node is ready.
-  	 * So, just pxm_to_nid(pxm) is OK.
-	 * This code here is for the system which doesn't have full SRAT
-  	 * table for possible cpus.
-	 */
-	node_cpuid[cpu].phys_id = physid;
-	node_cpuid[cpu].nid = acpi_get_node(handle);
-#endif
-	return 0;
-}
-
-int additional_cpus __initdata = -1;
-
-static __init int setup_additional_cpus(char *s)
-{
-	if (s)
-		additional_cpus = simple_strtol(s, NULL, 0);
-
-	return 0;
-}
-
-early_param("additional_cpus", setup_additional_cpus);
-
-/*
- * cpu_possible_mask should be static, it cannot change as CPUs
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_mask on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with additional_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- */
-__init void prefill_possible_map(void)
-{
-	int i;
-	int possible, disabled_cpus;
-
-	disabled_cpus = total_cpus - available_cpus;
-
- 	if (additional_cpus == -1) {
- 		if (disabled_cpus > 0)
-			additional_cpus = disabled_cpus;
- 		else
-			additional_cpus = 0;
- 	}
-
-	possible = available_cpus + additional_cpus;
-
-	if (possible > nr_cpu_ids)
-		possible = nr_cpu_ids;
-
-	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
-		possible, max((possible - available_cpus), 0));
-
-	for (i = 0; i < possible; i++)
-		set_cpu_possible(i, true);
-}
-
-static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
-{
-	cpumask_t tmp_map;
-	int cpu;
-
-	cpumask_complement(&tmp_map, cpu_present_mask);
-	cpu = cpumask_first(&tmp_map);
-	if (cpu >= nr_cpu_ids)
-		return -EINVAL;
-
-	acpi_map_cpu2node(handle, cpu, physid);
-
-	set_cpu_present(cpu, true);
-	ia64_cpu_to_sapicid[cpu] = physid;
-
-	acpi_processor_set_pdc(handle);
-
-	*pcpu = cpu;
-	return (0);
-}
-
-/* wrapper to silence section mismatch warning */
-int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
-{
-	return _acpi_map_lsapic(handle, physid, pcpu);
-}
-EXPORT_SYMBOL(acpi_map_cpu);
-
-int acpi_unmap_cpu(int cpu)
-{
-	ia64_cpu_to_sapicid[cpu] = -1;
-	set_cpu_present(cpu, false);
-
-#ifdef CONFIG_ACPI_NUMA
-	/* NUMA specific cleanup's */
-#endif
-
-	return (0);
-}
-EXPORT_SYMBOL(acpi_unmap_cpu);
-#endif				/* CONFIG_ACPI_HOTPLUG_CPU */
-
-#ifdef CONFIG_ACPI_NUMA
-static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth,
-				    void *context, void **ret)
-{
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
-	struct acpi_madt_io_sapic *iosapic;
-	unsigned int gsi_base;
-	int node;
-
-	/* Only care about objects w/ a method that returns the MADT */
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
-		return AE_OK;
-
-	if (!buffer.length || !buffer.pointer)
-		return AE_OK;
-
-	obj = buffer.pointer;
-	if (obj->type != ACPI_TYPE_BUFFER ||
-	    obj->buffer.length < sizeof(*iosapic)) {
-		kfree(buffer.pointer);
-		return AE_OK;
-	}
-
-	iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer;
-
-	if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) {
-		kfree(buffer.pointer);
-		return AE_OK;
-	}
-
-	gsi_base = iosapic->global_irq_base;
-
-	kfree(buffer.pointer);
-
-	/* OK, it's an IOSAPIC MADT entry; associate it with a node */
-	node = acpi_get_node(handle);
-	if (node == NUMA_NO_NODE || !node_online(node) ||
-	    cpumask_empty(cpumask_of_node(node)))
-		return AE_OK;
-
-	/* We know a gsi to node mapping! */
-	map_iosapic_to_node(gsi_base, node);
-	return AE_OK;
-}
-
-static int __init
-acpi_map_iosapics (void)
-{
-	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-	return 0;
-}
-
-fs_initcall(acpi_map_iosapics);
-#endif				/* CONFIG_ACPI_NUMA */
-
-int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
-{
-	int err;
-
-	if ((err = iosapic_init(phys_addr, gsi_base)))
-		return err;
-
-#ifdef CONFIG_ACPI_NUMA
-	acpi_map_iosapic(handle, 0, NULL, NULL);
-#endif				/* CONFIG_ACPI_NUMA */
-
-	return 0;
-}
-
-EXPORT_SYMBOL(acpi_register_ioapic);
-
-int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
-{
-	return iosapic_remove(gsi_base);
-}
-
-EXPORT_SYMBOL(acpi_unregister_ioapic);
-
-/*
- * acpi_suspend_lowlevel() - save kernel state and suspend.
- *
- * TBD when when IA64 starts to support suspend...
- */
-int acpi_suspend_lowlevel(void) { return 0; }
diff --git a/arch/ia64/kernel/acpi/Makefile b/arch/ia64/kernel/acpi/Makefile
new file mode 100644
index 0000000..8c12745
--- /dev/null
+++ b/arch/ia64/kernel/acpi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ACPI)		+= acpi.o acpi-ext.o
diff --git a/arch/ia64/kernel/acpi/acpi-ext.c b/arch/ia64/kernel/acpi/acpi-ext.c
new file mode 100644
index 0000000..8b9318d
--- /dev/null
+++ b/arch/ia64/kernel/acpi/acpi-ext.c
@@ -0,0 +1,104 @@
+/*
+ * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
+ *	Alex Williamson <alex.williamson@xxxxxx>
+ *	Bjorn Helgaas <bjorn.helgaas@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+#include <asm/acpi-ext.h>
+
+/*
+ * Device CSRs that do not appear in PCI config space should be described
+ * via ACPI.  This would normally be done with Address Space Descriptors
+ * marked as "consumer-only," but old versions of Windows and Linux ignore
+ * the producer/consumer flag, so HP invented a vendor-defined resource to
+ * describe the location and size of CSR space.
+ */
+
+struct acpi_vendor_uuid hp_ccsr_uuid = {
+	.subtype = 2,
+	.data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a,
+	    0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad },
+};
+
+static acpi_status hp_ccsr_locate(acpi_handle obj, u64 *base, u64 *length)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_resource *resource;
+	struct acpi_resource_vendor_typed *vendor;
+
+	status = acpi_get_vendor_resource(obj, METHOD_NAME__CRS, &hp_ccsr_uuid,
+		&buffer);
+
+	resource = buffer.pointer;
+	vendor = &resource->data.vendor_typed;
+
+	if (ACPI_FAILURE(status) || vendor->byte_length < 16) {
+		status = AE_NOT_FOUND;
+		goto exit;
+	}
+
+	memcpy(base, vendor->byte_data, sizeof(*base));
+	memcpy(length, vendor->byte_data + 8, sizeof(*length));
+
+  exit:
+	kfree(buffer.pointer);
+	return status;
+}
+
+struct csr_space {
+	u64	base;
+	u64	length;
+};
+
+static acpi_status find_csr_space(struct acpi_resource *resource, void *data)
+{
+	struct csr_space *space = data;
+	struct acpi_resource_address64 addr;
+	acpi_status status;
+
+	status = acpi_resource_to_address64(resource, &addr);
+	if (ACPI_SUCCESS(status) &&
+	    addr.resource_type == ACPI_MEMORY_RANGE &&
+	    addr.address_length &&
+	    addr.producer_consumer == ACPI_CONSUMER) {
+		space->base = addr.minimum;
+		space->length = addr.address_length;
+		return AE_CTRL_TERMINATE;
+	}
+	return AE_OK;		/* keep looking */
+}
+
+static acpi_status hp_crs_locate(acpi_handle obj, u64 *base, u64 *length)
+{
+	struct csr_space space = { 0, 0 };
+
+	acpi_walk_resources(obj, METHOD_NAME__CRS, find_csr_space, &space);
+	if (!space.length)
+		return AE_NOT_FOUND;
+
+	*base = space.base;
+	*length = space.length;
+	return AE_OK;
+}
+
+acpi_status hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
+{
+	acpi_status status;
+
+	status = hp_ccsr_locate(obj, csr_base, csr_length);
+	if (ACPI_SUCCESS(status))
+		return status;
+
+	return hp_crs_locate(obj, csr_base, csr_length);
+}
+EXPORT_SYMBOL(hp_acpi_csr_space);
diff --git a/arch/ia64/kernel/acpi/acpi.c b/arch/ia64/kernel/acpi/acpi.c
new file mode 100644
index 0000000..e795cb8
--- /dev/null
+++ b/arch/ia64/kernel/acpi/acpi.c
@@ -0,0 +1,1000 @@
+/*
+ *  acpi.c - Architecture-Specific Low-Level ACPI Support
+ *
+ *  Copyright (C) 1999 VA Linux Systems
+ *  Copyright (C) 1999,2000 Walt Drummond <drummond@xxxxxxxxxxx>
+ *  Copyright (C) 2000, 2002-2003 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@xxxxxxxxxx>
+ *  Copyright (C) 2000 Intel Corp.
+ *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@xxxxxxxxx>
+ *  Copyright (C) 2001 Paul Diefenbaugh <paul.s.diefenbaugh@xxxxxxxxx>
+ *  Copyright (C) 2001 Jenna Hall <jenna.s.hall@xxxxxxxxx>
+ *  Copyright (C) 2001 Takayoshi Kochi <t-kochi@xxxxxxxxxxxxx>
+ *  Copyright (C) 2002 Erich Focht <efocht@xxxxxxxxxx>
+ *  Copyright (C) 2004 Ashok Raj <ashok.raj@xxxxxxxxx>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/mmzone.h>
+#include <linux/nodemask.h>
+#include <linux/slab.h>
+#include <acpi/processor.h>
+#include <asm/io.h>
+#include <asm/iosapic.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/numa.h>
+#include <asm/sal.h>
+#include <asm/cyclone.h>
+
+#define PREFIX			"ACPI: "
+
+int acpi_lapic;
+unsigned int acpi_cpei_override;
+unsigned int acpi_cpei_phys_cpuid;
+
+unsigned long acpi_wakeup_address = 0;
+
+#ifdef CONFIG_IA64_GENERIC
+static unsigned long __init acpi_find_rsdp(void)
+{
+	unsigned long rsdp_phys = 0;
+
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		rsdp_phys = efi.acpi20;
+	else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+		printk(KERN_WARNING PREFIX
+		       "v1.0/r0.71 tables no longer supported\n");
+	return rsdp_phys;
+}
+
+const char __init *
+acpi_get_sysname(void)
+{
+	unsigned long rsdp_phys;
+	struct acpi_table_rsdp *rsdp;
+	struct acpi_table_xsdt *xsdt;
+	struct acpi_table_header *hdr;
+#ifdef CONFIG_INTEL_IOMMU
+	u64 i, nentries;
+#endif
+
+	rsdp_phys = acpi_find_rsdp();
+	if (!rsdp_phys) {
+		printk(KERN_ERR
+		       "ACPI 2.0 RSDP not found, default to \"dig\"\n");
+		return "dig";
+	}
+
+	rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys);
+	if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) {
+		printk(KERN_ERR
+		       "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
+		return "dig";
+	}
+
+	xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address);
+	hdr = &xsdt->header;
+	if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) {
+		printk(KERN_ERR
+		       "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
+		return "dig";
+	}
+
+	if (!strcmp(hdr->oem_id, "HP")) {
+		return "hpzx1";
+	} else if (!strcmp(hdr->oem_id, "SGI")) {
+		if (!strcmp(hdr->oem_table_id + 4, "UV"))
+			return "uv";
+		else
+			return "sn2";
+	}
+
+#ifdef CONFIG_INTEL_IOMMU
+	/* Look for Intel IOMMU */
+	nentries = (hdr->length - sizeof(*hdr)) /
+			 sizeof(xsdt->table_offset_entry[0]);
+	for (i = 0; i < nentries; i++) {
+		hdr = __va(xsdt->table_offset_entry[i]);
+		if (strncmp(hdr->signature, ACPI_SIG_DMAR,
+			sizeof(ACPI_SIG_DMAR) - 1) == 0)
+			return "dig_vtd";
+	}
+#endif
+
+	return "dig";
+}
+#endif /* CONFIG_IA64_GENERIC */
+
+#define ACPI_MAX_PLATFORM_INTERRUPTS	256
+
+/* Array to record platform interrupt vectors for generic interrupt routing. */
+int platform_intr_list[ACPI_MAX_PLATFORM_INTERRUPTS] = {
+	[0 ... ACPI_MAX_PLATFORM_INTERRUPTS - 1] = -1
+};
+
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC;
+
+/*
+ * Interrupt routing API for device drivers.  Provides interrupt vector for
+ * a generic platform event.  Currently only CPEI is implemented.
+ */
+int acpi_request_vector(u32 int_type)
+{
+	int vector = -1;
+
+	if (int_type < ACPI_MAX_PLATFORM_INTERRUPTS) {
+		/* corrected platform error interrupt */
+		vector = platform_intr_list[int_type];
+	} else
+		printk(KERN_ERR
+		       "acpi_request_vector(): invalid interrupt type\n");
+	return vector;
+}
+
+char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+	return __va(phys_addr);
+}
+
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+}
+
+/* --------------------------------------------------------------------------
+                            Boot-time Table Parsing
+   -------------------------------------------------------------------------- */
+
+static int available_cpus __initdata;
+struct acpi_table_madt *acpi_madt __initdata;
+static u8 has_8259;
+
+static int __init
+acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
+			  const unsigned long end)
+{
+	struct acpi_madt_local_apic_override *lapic;
+
+	lapic = (struct acpi_madt_local_apic_override *)header;
+
+	if (BAD_MADT_ENTRY(lapic, end))
+		return -EINVAL;
+
+	if (lapic->address) {
+		iounmap(ipi_base_addr);
+		ipi_base_addr = ioremap(lapic->address, 0);
+	}
+	return 0;
+}
+
+static int __init
+acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end)
+{
+	struct acpi_madt_local_sapic *lsapic;
+
+	lsapic = (struct acpi_madt_local_sapic *)header;
+
+	/*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
+
+	if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
+#ifdef CONFIG_SMP
+		smp_boot_data.cpu_phys_id[available_cpus] =
+		    (lsapic->id << 8) | lsapic->eid;
+#endif
+		++available_cpus;
+	}
+
+	total_cpus++;
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
+{
+	struct acpi_madt_local_apic_nmi *lacpi_nmi;
+
+	lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
+
+	if (BAD_MADT_ENTRY(lacpi_nmi, end))
+		return -EINVAL;
+
+	/* TBD: Support lapic_nmi entries */
+	return 0;
+}
+
+static int __init
+acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end)
+{
+	struct acpi_madt_io_sapic *iosapic;
+
+	iosapic = (struct acpi_madt_io_sapic *)header;
+
+	if (BAD_MADT_ENTRY(iosapic, end))
+		return -EINVAL;
+
+	return iosapic_init(iosapic->address, iosapic->global_irq_base);
+}
+
+static unsigned int __initdata acpi_madt_rev;
+
+static int __init
+acpi_parse_plat_int_src(struct acpi_subtable_header * header,
+			const unsigned long end)
+{
+	struct acpi_madt_interrupt_source *plintsrc;
+	int vector;
+
+	plintsrc = (struct acpi_madt_interrupt_source *)header;
+
+	if (BAD_MADT_ENTRY(plintsrc, end))
+		return -EINVAL;
+
+	/*
+	 * Get vector assignment for this interrupt, set attributes,
+	 * and program the IOSAPIC routing table.
+	 */
+	vector = iosapic_register_platform_intr(plintsrc->type,
+						plintsrc->global_irq,
+						plintsrc->io_sapic_vector,
+						plintsrc->eid,
+						plintsrc->id,
+						((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
+						 ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
+						IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+						((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
+						 ACPI_MADT_TRIGGER_EDGE) ?
+						IOSAPIC_EDGE : IOSAPIC_LEVEL);
+
+	platform_intr_list[plintsrc->type] = vector;
+	if (acpi_madt_rev > 1) {
+		acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
+	}
+
+	/*
+	 * Save the physical id, so we can check when its being removed
+	 */
+	acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;
+
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+unsigned int can_cpei_retarget(void)
+{
+	extern int cpe_vector;
+	extern unsigned int force_cpei_retarget;
+
+	/*
+	 * Only if CPEI is supported and the override flag
+	 * is present, otherwise return that its re-targettable
+	 * if we are in polling mode.
+	 */
+	if (cpe_vector > 0) {
+		if (acpi_cpei_override || force_cpei_retarget)
+			return 1;
+		else
+			return 0;
+	}
+	return 1;
+}
+
+unsigned int is_cpu_cpei_target(unsigned int cpu)
+{
+	unsigned int logical_id;
+
+	logical_id = cpu_logical_id(acpi_cpei_phys_cpuid);
+
+	if (logical_id == cpu)
+		return 1;
+	else
+		return 0;
+}
+
+void set_cpei_target_cpu(unsigned int cpu)
+{
+	acpi_cpei_phys_cpuid = cpu_physical_id(cpu);
+}
+#endif
+
+unsigned int get_cpei_target_cpu(void)
+{
+	return acpi_cpei_phys_cpuid;
+}
+
+static int __init
+acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
+		       const unsigned long end)
+{
+	struct acpi_madt_interrupt_override *p;
+
+	p = (struct acpi_madt_interrupt_override *)header;
+
+	if (BAD_MADT_ENTRY(p, end))
+		return -EINVAL;
+
+	iosapic_override_isa_irq(p->source_irq, p->global_irq,
+				 ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
+				  ACPI_MADT_POLARITY_ACTIVE_LOW) ?
+				 IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH,
+				 ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
+				 ACPI_MADT_TRIGGER_LEVEL) ?
+				 IOSAPIC_LEVEL : IOSAPIC_EDGE);
+	return 0;
+}
+
+static int __init
+acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
+{
+	struct acpi_madt_nmi_source *nmi_src;
+
+	nmi_src = (struct acpi_madt_nmi_source *)header;
+
+	if (BAD_MADT_ENTRY(nmi_src, end))
+		return -EINVAL;
+
+	/* TBD: Support nimsrc entries */
+	return 0;
+}
+
+static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) {
+
+		/*
+		 * Unfortunately ITC_DRIFT is not yet part of the
+		 * official SAL spec, so the ITC_DRIFT bit is not
+		 * set by the BIOS on this hardware.
+		 */
+		sal_platform_features |= IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT;
+
+		cyclone_setup();
+	}
+}
+
+static int __init acpi_parse_madt(struct acpi_table_header *table)
+{
+	if (!table)
+		return -EINVAL;
+
+	acpi_madt = (struct acpi_table_madt *)table;
+
+	acpi_madt_rev = acpi_madt->header.revision;
+
+	/* remember the value for reference after free_initmem() */
+#ifdef CONFIG_ITANIUM
+	has_8259 = 1;		/* Firmware on old Itanium systems is broken */
+#else
+	has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT;
+#endif
+	iosapic_system_init(has_8259);
+
+	/* Get base address of IPI Message Block */
+
+	if (acpi_madt->address)
+		ipi_base_addr = ioremap(acpi_madt->address, 0);
+
+	printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
+
+	acpi_madt_oem_check(acpi_madt->header.oem_id,
+			    acpi_madt->header.oem_table_id);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI_NUMA
+
+#undef SLIT_DEBUG
+
+#define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32)
+
+static int __initdata srat_num_cpus;	/* number of cpus */
+static u32 pxm_flag[PXM_FLAG_LEN];
+#define pxm_bit_set(bit)	(set_bit(bit,(void *)pxm_flag))
+#define pxm_bit_test(bit)	(test_bit(bit,(void *)pxm_flag))
+static struct acpi_table_slit __initdata *slit_table;
+cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
+
+static int __init
+get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
+{
+	int pxm;
+
+	pxm = pa->proximity_domain_lo;
+	if (ia64_platform_is("sn2") || acpi_srat_revision >= 2)
+		pxm += pa->proximity_domain_hi[0] << 8;
+	return pxm;
+}
+
+static int __init
+get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
+{
+	int pxm;
+
+	pxm = ma->proximity_domain;
+	if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1)
+		pxm &= 0xff;
+
+	return pxm;
+}
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ */
+void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
+{
+	u32 len;
+
+	len = sizeof(struct acpi_table_header) + 8
+	    + slit->locality_count * slit->locality_count;
+	if (slit->header.length != len) {
+		printk(KERN_ERR
+		       "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
+		       len, slit->header.length);
+		return;
+	}
+	slit_table = slit;
+}
+
+void __init
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
+{
+	int pxm;
+
+	if (!(pa->flags & ACPI_SRAT_CPU_ENABLED))
+		return;
+
+	if (srat_num_cpus >= ARRAY_SIZE(node_cpuid)) {
+		printk_once(KERN_WARNING
+			    "node_cpuid[%ld] is too small, may not be able to use all cpus\n",
+			    ARRAY_SIZE(node_cpuid));
+		return;
+	}
+	pxm = get_processor_proximity_domain(pa);
+
+	/* record this node in proximity bitmap */
+	pxm_bit_set(pxm);
+
+	node_cpuid[srat_num_cpus].phys_id =
+	    (pa->apic_id << 8) | (pa->local_sapic_eid);
+	/* nid should be overridden as logical node id later */
+	node_cpuid[srat_num_cpus].nid = pxm;
+	cpu_set(srat_num_cpus, early_cpu_possible_map);
+	srat_num_cpus++;
+}
+
+int __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+{
+	unsigned long paddr, size;
+	int pxm;
+	struct node_memblk_s *p, *q, *pend;
+
+	pxm = get_memory_proximity_domain(ma);
+
+	/* fill node memory chunk structure */
+	paddr = ma->base_address;
+	size = ma->length;
+
+	/* Ignore disabled entries */
+	if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
+		return -1;
+
+	/* record this node in proximity bitmap */
+	pxm_bit_set(pxm);
+
+	/* Insertion sort based on base address */
+	pend = &node_memblk[num_node_memblks];
+	for (p = &node_memblk[0]; p < pend; p++) {
+		if (paddr < p->start_paddr)
+			break;
+	}
+	if (p < pend) {
+		for (q = pend - 1; q >= p; q--)
+			*(q + 1) = *q;
+	}
+	p->start_paddr = paddr;
+	p->size = size;
+	p->nid = pxm;
+	num_node_memblks++;
+	return 0;
+}
+
+void __init acpi_numa_arch_fixup(void)
+{
+	int i, j, node_from, node_to;
+
+	/* If there's no SRAT, fix the phys_id and mark node 0 online */
+	if (srat_num_cpus == 0) {
+		node_set_online(0);
+		node_cpuid[0].phys_id = hard_smp_processor_id();
+		return;
+	}
+
+	/*
+	 * MCD - This can probably be dropped now.  No need for pxm ID to node ID
+	 * mapping with sparse node numbering iff MAX_PXM_DOMAINS <= MAX_NUMNODES.
+	 */
+	nodes_clear(node_online_map);
+	for (i = 0; i < MAX_PXM_DOMAINS; i++) {
+		if (pxm_bit_test(i)) {
+			int nid = acpi_map_pxm_to_node(i);
+			node_set_online(nid);
+		}
+	}
+
+	/* set logical node id in memory chunk structure */
+	for (i = 0; i < num_node_memblks; i++)
+		node_memblk[i].nid = pxm_to_node(node_memblk[i].nid);
+
+	/* assign memory bank numbers for each chunk on each node */
+	for_each_online_node(i) {
+		int bank;
+
+		bank = 0;
+		for (j = 0; j < num_node_memblks; j++)
+			if (node_memblk[j].nid == i)
+				node_memblk[j].bank = bank++;
+	}
+
+	/* set logical node id in cpu structure */
+	for_each_possible_early_cpu(i)
+		node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
+
+	printk(KERN_INFO "Number of logical nodes in system = %d\n",
+	       num_online_nodes());
+	printk(KERN_INFO "Number of memory chunks in system = %d\n",
+	       num_node_memblks);
+
+	if (!slit_table) {
+		for (i = 0; i < MAX_NUMNODES; i++)
+			for (j = 0; j < MAX_NUMNODES; j++)
+				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+							REMOTE_DISTANCE;
+		return;
+	}
+
+	memset(numa_slit, -1, sizeof(numa_slit));
+	for (i = 0; i < slit_table->locality_count; i++) {
+		if (!pxm_bit_test(i))
+			continue;
+		node_from = pxm_to_node(i);
+		for (j = 0; j < slit_table->locality_count; j++) {
+			if (!pxm_bit_test(j))
+				continue;
+			node_to = pxm_to_node(j);
+			node_distance(node_from, node_to) =
+			    slit_table->entry[i * slit_table->locality_count + j];
+		}
+	}
+
+#ifdef SLIT_DEBUG
+	printk("ACPI 2.0 SLIT locality table:\n");
+	for_each_online_node(i) {
+		for_each_online_node(j)
+		    printk("%03d ", node_distance(i, j));
+		printk("\n");
+	}
+#endif
+}
+#endif				/* CONFIG_ACPI_NUMA */
+
+/*
+ * success: return IRQ number (>=0)
+ * failure: return < 0
+ */
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
+{
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
+		return gsi;
+
+	if (has_8259 && gsi < 16)
+		return isa_irq_to_vector(gsi);
+
+	return iosapic_register_intr(gsi,
+				     (polarity ==
+				      ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH :
+				     IOSAPIC_POL_LOW,
+				     (triggering ==
+				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
+				     IOSAPIC_LEVEL);
+}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
+		return;
+
+	if (has_8259 && gsi < 16)
+		return;
+
+	iosapic_unregister_intr(gsi);
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
+
+static int __init acpi_parse_fadt(struct acpi_table_header *table)
+{
+	struct acpi_table_header *fadt_header;
+	struct acpi_table_fadt *fadt;
+
+	if (!table)
+		return -EINVAL;
+
+	fadt_header = (struct acpi_table_header *)table;
+	if (fadt_header->revision != 3)
+		return -ENODEV;	/* Only deal with ACPI 2.0 FADT */
+
+	fadt = (struct acpi_table_fadt *)fadt_header;
+
+	acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+				 ACPI_ACTIVE_LOW);
+	return 0;
+}
+
+int __init early_acpi_boot_init(void)
+{
+	int ret;
+
+	/*
+	 * do a partial walk of MADT to determine how many CPUs
+	 * we have including offline CPUs
+	 */
+	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+		printk(KERN_ERR PREFIX "Can't find MADT\n");
+		return 0;
+	}
+
+	ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+		acpi_parse_lsapic, NR_CPUS);
+	if (ret < 1)
+		printk(KERN_ERR PREFIX
+		       "Error parsing MADT - no LAPIC entries\n");
+	else
+		acpi_lapic = 1;
+
+#ifdef CONFIG_SMP
+	if (available_cpus == 0) {
+		printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n");
+		printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id());
+		smp_boot_data.cpu_phys_id[available_cpus] =
+		    hard_smp_processor_id();
+		available_cpus = 1;	/* We've got at least one of these, no? */
+	}
+	smp_boot_data.cpu_count = available_cpus;
+#endif
+	/* Make boot-up look pretty */
+	printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus,
+	       total_cpus);
+
+	return 0;
+}
+
+int __init acpi_boot_init(void)
+{
+
+	/*
+	 * MADT
+	 * ----
+	 * Parse the Multiple APIC Description Table (MADT), if exists.
+	 * Note that this table provides platform SMP configuration
+	 * information -- the successor to MPS tables.
+	 */
+
+	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+		printk(KERN_ERR PREFIX "Can't find MADT\n");
+		goto skip_madt;
+	}
+
+	/* Local APIC */
+
+	if (acpi_table_parse_madt
+	    (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
+		printk(KERN_ERR PREFIX
+		       "Error parsing LAPIC address override entry\n");
+
+	if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
+	    < 0)
+		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+
+	/* I/O APIC */
+
+	if (acpi_table_parse_madt
+	    (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
+		if (!ia64_platform_is("sn2"))
+			printk(KERN_ERR PREFIX
+			       "Error parsing MADT - no IOSAPIC entries\n");
+	}
+
+	/* System-Level Interrupt Routing */
+
+	if (acpi_table_parse_madt
+	    (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
+	     ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
+		printk(KERN_ERR PREFIX
+		       "Error parsing platform interrupt source entry\n");
+
+	if (acpi_table_parse_madt
+	    (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
+		printk(KERN_ERR PREFIX
+		       "Error parsing interrupt source overrides entry\n");
+
+	if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
+		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+      skip_madt:
+
+	/*
+	 * FADT says whether a legacy keyboard controller is present.
+	 * The FADT also contains an SCI_INT line, by which the system
+	 * gets interrupts such as power and sleep buttons.  If it's not
+	 * on a Legacy interrupt, it needs to be setup.
+	 */
+	if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
+		printk(KERN_ERR PREFIX "Can't find FADT\n");
+
+#ifdef CONFIG_ACPI_NUMA
+#ifdef CONFIG_SMP
+	if (srat_num_cpus == 0) {
+		int cpu, i = 1;
+		for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++)
+			if (smp_boot_data.cpu_phys_id[cpu] !=
+			    hard_smp_processor_id())
+				node_cpuid[i++].phys_id =
+				    smp_boot_data.cpu_phys_id[cpu];
+	}
+#endif
+	build_cpu_to_node_map();
+#endif
+	return 0;
+}
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+	int tmp;
+
+	if (has_8259 && gsi < 16)
+		*irq = isa_irq_to_vector(gsi);
+	else {
+		tmp = gsi_to_irq(gsi);
+		if (tmp == -1)
+			return -1;
+		*irq = tmp;
+	}
+	return 0;
+}
+
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq >= 16)
+		return -1;
+	*gsi = isa_irq;
+	return 0;
+}
+
+/*
+ *  ACPI based hotplug CPU support
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+	/*
+	 * We don't have cpu-only-node hotadd. But if the system equips
+	 * SRAT table, pxm is already found and node is ready.
+  	 * So, just pxm_to_nid(pxm) is OK.
+	 * This code here is for the system which doesn't have full SRAT
+  	 * table for possible cpus.
+	 */
+	node_cpuid[cpu].phys_id = physid;
+	node_cpuid[cpu].nid = acpi_get_node(handle);
+#endif
+	return 0;
+}
+
+int additional_cpus __initdata = -1;
+
+static __init int setup_additional_cpus(char *s)
+{
+	if (s)
+		additional_cpus = simple_strtol(s, NULL, 0);
+
+	return 0;
+}
+
+early_param("additional_cpus", setup_additional_cpus);
+
+/*
+ * cpu_possible_mask should be static, it cannot change as CPUs
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_mask on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - The user can overwrite it with additional_cpus=NUM
+ * - Otherwise don't reserve additional CPUs.
+ */
+__init void prefill_possible_map(void)
+{
+	int i;
+	int possible, disabled_cpus;
+
+	disabled_cpus = total_cpus - available_cpus;
+
+ 	if (additional_cpus == -1) {
+ 		if (disabled_cpus > 0)
+			additional_cpus = disabled_cpus;
+ 		else
+			additional_cpus = 0;
+ 	}
+
+	possible = available_cpus + additional_cpus;
+
+	if (possible > nr_cpu_ids)
+		possible = nr_cpu_ids;
+
+	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+		possible, max((possible - available_cpus), 0));
+
+	for (i = 0; i < possible; i++)
+		set_cpu_possible(i, true);
+}
+
+static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
+{
+	cpumask_t tmp_map;
+	int cpu;
+
+	cpumask_complement(&tmp_map, cpu_present_mask);
+	cpu = cpumask_first(&tmp_map);
+	if (cpu >= nr_cpu_ids)
+		return -EINVAL;
+
+	acpi_map_cpu2node(handle, cpu, physid);
+
+	set_cpu_present(cpu, true);
+	ia64_cpu_to_sapicid[cpu] = physid;
+
+	acpi_processor_set_pdc(handle);
+
+	*pcpu = cpu;
+	return (0);
+}
+
+/* wrapper to silence section mismatch warning */
+int __ref acpi_map_cpu(acpi_handle handle, int physid, int *pcpu)
+{
+	return _acpi_map_lsapic(handle, physid, pcpu);
+}
+EXPORT_SYMBOL(acpi_map_cpu);
+
+int acpi_unmap_cpu(int cpu)
+{
+	ia64_cpu_to_sapicid[cpu] = -1;
+	set_cpu_present(cpu, false);
+
+#ifdef CONFIG_ACPI_NUMA
+	/* NUMA specific cleanup's */
+#endif
+
+	return (0);
+}
+EXPORT_SYMBOL(acpi_unmap_cpu);
+#endif				/* CONFIG_ACPI_HOTPLUG_CPU */
+
+#ifdef CONFIG_ACPI_NUMA
+static acpi_status acpi_map_iosapic(acpi_handle handle, u32 depth,
+				    void *context, void **ret)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	struct acpi_madt_io_sapic *iosapic;
+	unsigned int gsi_base;
+	int node;
+
+	/* Only care about objects w/ a method that returns the MADT */
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+		return AE_OK;
+
+	if (!buffer.length || !buffer.pointer)
+		return AE_OK;
+
+	obj = buffer.pointer;
+	if (obj->type != ACPI_TYPE_BUFFER ||
+	    obj->buffer.length < sizeof(*iosapic)) {
+		kfree(buffer.pointer);
+		return AE_OK;
+	}
+
+	iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer;
+
+	if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) {
+		kfree(buffer.pointer);
+		return AE_OK;
+	}
+
+	gsi_base = iosapic->global_irq_base;
+
+	kfree(buffer.pointer);
+
+	/* OK, it's an IOSAPIC MADT entry; associate it with a node */
+	node = acpi_get_node(handle);
+	if (node == NUMA_NO_NODE || !node_online(node) ||
+	    cpumask_empty(cpumask_of_node(node)))
+		return AE_OK;
+
+	/* We know a gsi to node mapping! */
+	map_iosapic_to_node(gsi_base, node);
+	return AE_OK;
+}
+
+static int __init
+acpi_map_iosapics (void)
+{
+	acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+	return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif				/* CONFIG_ACPI_NUMA */
+
+int __ref acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	int err;
+
+	if ((err = iosapic_init(phys_addr, gsi_base)))
+		return err;
+
+#ifdef CONFIG_ACPI_NUMA
+	acpi_map_iosapic(handle, 0, NULL, NULL);
+#endif				/* CONFIG_ACPI_NUMA */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+	return iosapic_remove(gsi_base);
+}
+
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
+/*
+ * acpi_suspend_lowlevel() - save kernel state and suspend.
+ *
+ * TBD when when IA64 starts to support suspend...
+ */
+int acpi_suspend_lowlevel(void) { return 0; }
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux