Hi Christoffer,
Sorry for the late reply, I got no answer yet but
with one question below.
On 2015年01月20日 04:33, Christoffer Dall wrote:
Hi,
On Sun, Jan 04, 2015 at 06:55:18PM +0800, Hanjun Guo wrote:
From: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
Add documentation for the guidelines of how to use ACPI
on ARM64.
Reviewed-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
Signed-off-by: Graeme Gregory <graeme.gregory@xxxxxxxxxx>
Signed-off-by: Al Stone <al.stone@xxxxxxxxxx>
Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
---
Documentation/arm64/arm-acpi.txt | 327 +++++++++++++++++++++++++++++++++++++++
1 file changed, 327 insertions(+)
create mode 100644 Documentation/arm64/arm-acpi.txt
diff --git a/Documentation/arm64/arm-acpi.txt b/Documentation/arm64/arm-acpi.txt
new file mode 100644
index 0000000..21e7020
--- /dev/null
+++ b/Documentation/arm64/arm-acpi.txt
@@ -0,0 +1,327 @@
+ACPI on ARMv8 Servers
+---------------------
+ACPI can be used for ARMv8 general purpose servers designed to follow
+the ARM SBSA (Server Base System Architecture) and SBBR (Server Base
+Boot Requirements) specifications, currently available to those with
+an ARM login at http://silver.arm.com.
+
+The ARMv8 kernel implements the reduced hardware model of ACPI version
+5.1 and later. Links to the specification and all external documents
+it refers to are managed by the UEFI Forum. The specification is
+available at http://www.uefi.org/specifications and external documents
+can be found via http://www.uefi.org/acpi.
+
+If an ARMv8 system does not meet the requirements of the SBSA, or cannot
+be described using the mechanisms defined in the required ACPI specifications,
+then it is likely that Device Tree (DT) is more suitable than ACPI for the
+hardware.
+
+
+Relationship with Device Tree
+-----------------------------
+ACPI support in drivers and subsystems for ARMv8 should never be mutually
+exclusive with DT support at compile time.
+
+At boot time the kernel will only use one description method depending on
+parameters passed from the bootloader (including kernel bootargs).
+
+Regardless of whether DT or ACPI is used, the kernel must always be capable
+of booting with either scheme (in kernels with both schemes enabled at compile
+time).
+
+
+Booting using ACPI tables
+-------------------------
+The only defined method for passing ACPI tables to the kernel on ARMv8
+is via the UEFI system configuration table.
+
This is a bit concerning for the approach we are currently taking to
support ACPI on Xen [1].
Background: Xen is a tiny hypervisor which cannot parse the DSDT or any
other non-static table. Xen relies on Linux in Dom0 to manage most
(basically everything except the GIC, serial port, SMMU, and timers)
hardware resources and relies on Dom0 to parse the ACPI tables.
While Xen itself is typically booted by UEFI and finds RSDP through the
UEFI system table, Xen does NOT run another UEFI instance to boot Dom0
nor does it pass through the presence of UEFI to Dom0 in any way.
Instead, it just created a DT (with modifications concerning the
hardware mentioned above) and boots Linux in Dom0 directly (on x86 any
required UEFI call is performed through paravirtualized hypercalls).
In the case of ACPI, Xen adds a property to the chosen node and
populates it with the RDSP in Dom0's address space. Patches have not
Sorry I'm not familiar with hypervisor, I have question here about
x86 on xen, how ACPI works on XEN for x86?
Thanks
Hanjun
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
