[PATCH 3/6] x86, acpi, pci: Move PCI config space accessors.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We are going to use mmio_config_{} name convention across all architectures.
Currently it belongs to asm/pci_x86.h header which should be included
only for x86 specific files. From now on, those accessors are in asm/pci.h
header which can be included in non-architecture code much easier.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@xxxxxxxxxx>
Tested-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
---
 arch/x86/include/asm/pci.h     | 42 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/pci_x86.h | 43 ------------------------------------------
 2 files changed, 42 insertions(+), 43 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..5ba3720 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -71,6 +71,48 @@ void pcibios_set_master(struct pci_dev *dev);
 struct irq_routing_table *pcibios_get_irq_routing_table(void);
 int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
 
+/*
+ * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
+ * on their northbrige except through the * %eax register. As such, you MUST
+ * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
+ * accessor functions.
+ * In fact just use pci_config_*, nothing else please.
+ */
+static inline unsigned char mmio_config_readb(void __iomem *pos)
+{
+	u8 val;
+	asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline unsigned short mmio_config_readw(void __iomem *pos)
+{
+	u16 val;
+	asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline unsigned int mmio_config_readl(void __iomem *pos)
+{
+	u32 val;
+	asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
+	return val;
+}
+
+static inline void mmio_config_writeb(void __iomem *pos, u8 val)
+{
+	asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writew(void __iomem *pos, u16 val)
+{
+	asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writel(void __iomem *pos, u32 val)
+{
+	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
 
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index caba141..42e7332 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -121,49 +121,6 @@ extern int __init pcibios_init(void);
 extern int pci_legacy_init(void);
 extern void pcibios_fixup_irqs(void);
 
-/*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
- */
-static inline unsigned char mmio_config_readb(void __iomem *pos)
-{
-	u8 val;
-	asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline unsigned short mmio_config_readw(void __iomem *pos)
-{
-	u16 val;
-	asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline unsigned int mmio_config_readl(void __iomem *pos)
-{
-	u32 val;
-	asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
-	return val;
-}
-
-static inline void mmio_config_writeb(void __iomem *pos, u8 val)
-{
-	asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writew(void __iomem *pos, u16 val)
-{
-	asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writel(void __iomem *pos, u32 val)
-{
-	asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
-}
-
 #ifdef CONFIG_PCI
 # ifdef CONFIG_ACPI
 #  define x86_default_pci_init		pci_acpi_init
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux