On Tue, 21 Oct 2014 23:19:56 +0200
, "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
wrote:
> From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
>
> Make use of device property API in this driver so that both DT and ACPI
> based systems can use this driver.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> ---
> drivers/misc/eeprom/at25.c | 34 +++++++++++++---------------------
> 1 file changed, 13 insertions(+), 21 deletions(-)
>
> Index: linux-pm/drivers/misc/eeprom/at25.c
> ===================================================================
> --- linux-pm.orig/drivers/misc/eeprom/at25.c
> +++ linux-pm/drivers/misc/eeprom/at25.c
> @@ -18,7 +18,7 @@
>
> #include <linux/spi/spi.h>
> #include <linux/spi/eeprom.h>
> -#include <linux/of.h>
> +#include <linux/property.h>
>
> /*
> * NOTE: this is an *EEPROM* driver. The vagaries of product naming
> @@ -301,35 +301,33 @@ static ssize_t at25_mem_write(struct mem
>
> /*-------------------------------------------------------------------------*/
>
> -static int at25_np_to_chip(struct device *dev,
> - struct device_node *np,
> - struct spi_eeprom *chip)
> +static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
> {
> u32 val;
>
> memset(chip, 0, sizeof(*chip));
> - strncpy(chip->name, np->name, sizeof(chip->name));
> + strncpy(chip->name, "at25", sizeof(chip->name));
This line changes behaviour of the driver. It's possibly not a problem,
but it should be commented on and whether any due diligance has been
done to make sure it there isn't anything that depends on it.
Otherwise:
Acked-by: Grant Likely <grant.likely@xxxxxxxxxx>
>
> - if (of_property_read_u32(np, "size", &val) == 0 ||
> - of_property_read_u32(np, "at25,byte-len", &val) == 0) {
> + if (device_property_read_u32(dev, "size", &val) == 0 ||
> + device_property_read_u32(dev, "at25,byte-len", &val) == 0) {
> chip->byte_len = val;
> } else {
> dev_err(dev, "Error: missing \"size\" property\n");
> return -ENODEV;
> }
>
> - if (of_property_read_u32(np, "pagesize", &val) == 0 ||
> - of_property_read_u32(np, "at25,page-size", &val) == 0) {
> + if (device_property_read_u32(dev, "pagesize", &val) == 0 ||
> + device_property_read_u32(dev, "at25,page-size", &val) == 0) {
> chip->page_size = (u16)val;
> } else {
> dev_err(dev, "Error: missing \"pagesize\" property\n");
> return -ENODEV;
> }
>
> - if (of_property_read_u32(np, "at25,addr-mode", &val) == 0) {
> + if (device_property_read_u32(dev, "at25,addr-mode", &val) == 0) {
> chip->flags = (u16)val;
> } else {
> - if (of_property_read_u32(np, "address-width", &val)) {
> + if (device_property_read_u32(dev, "address-width", &val)) {
> dev_err(dev,
> "Error: missing \"address-width\" property\n");
> return -ENODEV;
> @@ -350,7 +348,7 @@ static int at25_np_to_chip(struct device
> val);
> return -ENODEV;
> }
> - if (of_find_property(np, "read-only", NULL))
> + if (device_property_present(dev, "read-only"))
> chip->flags |= EE_READONLY;
> }
> return 0;
> @@ -360,21 +358,15 @@ static int at25_probe(struct spi_device
> {
> struct at25_data *at25 = NULL;
> struct spi_eeprom chip;
> - struct device_node *np = spi->dev.of_node;
> int err;
> int sr;
> int addrlen;
>
> /* Chip description */
> if (!spi->dev.platform_data) {
> - if (np) {
> - err = at25_np_to_chip(&spi->dev, np, &chip);
> - if (err)
> - return err;
> - } else {
> - dev_err(&spi->dev, "Error: no chip description\n");
> - return -ENODEV;
> - }
> + err = at25_fw_to_chip(&spi->dev, &chip);
> + if (err)
> + return err;
> } else
> chip = *(struct spi_eeprom *)spi->dev.platform_data;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
