Re: [PATCH v5 07/12] leds: leds-gpio: Add support for GPIO descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 17, 2014 at 2:11 PM, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:

> From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
>
> GPIO descriptors are the preferred way over legacy GPIO numbers
> nowadays. Convert the driver to use GPIO descriptors internally but
> still allow passing legacy GPIO numbers from platform data to support
> existing platforms.
>
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Acked-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
> Acked-by: Bryan Wu <cooloney@xxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
(...)

>         if (led_dat->blinking) {
> -               led_dat->platform_gpio_blink_set(led_dat->gpio,
> -                                                led_dat->new_level,
> -                                                NULL, NULL);
> +               int gpio = desc_to_gpio(led_dat->gpiod);
> +               int level = led_dat->new_level;

So this desc_to_gpio() is done only to call the legacy callback below?

> +               if (gpiod_is_active_low(led_dat->gpiod))
> +                       level = !level;

And that leads to making it necessary to have this helper variable
to invert the level since that callback does not pass a descriptor
(which would inherently know if it's active low)....

> +
> +               led_dat->platform_gpio_blink_set(gpio, level, NULL, NULL);

Is it *really* impossible to change all the users of this callback?

>                 led_dat->blinking = 0;
>         } else
> -               gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
> +               gpiod_set_value_cansleep(led_dat->gpiod, led_dat->new_level);

(...)
>         /* Setting GPIOs with I2C/etc requires a task context, and we don't
>          * seem to have a reliable way to know if we're already in one; so
>          * let's just assume the worst.
> @@ -72,11 +73,16 @@ static void gpio_led_set(struct led_clas
>                 schedule_work(&led_dat->work);
>         } else {
>                 if (led_dat->blinking) {
> -                       led_dat->platform_gpio_blink_set(led_dat->gpio, level,
> -                                                        NULL, NULL);
> +                       int gpio = desc_to_gpio(led_dat->gpiod);
> +
> +                       if (gpiod_is_active_low(led_dat->gpiod))
> +                               level = !level;
> +
> +                       led_dat->platform_gpio_blink_set(gpio, level, NULL,
> +                                                        NULL);

Same comment.

> @@ -85,9 +91,10 @@ static int gpio_blink_set(struct led_cla
>  {
>         struct gpio_led_data *led_dat =
>                 container_of(led_cdev, struct gpio_led_data, cdev);
> +       int gpio = desc_to_gpio(led_dat->gpiod);
>
>         led_dat->blinking = 1;
> -       return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
> +       return led_dat->platform_gpio_blink_set(gpio, GPIO_LED_BLINK,
>                                                 delay_on, delay_off);

Same comment.

> @@ -97,24 +104,33 @@ static int create_gpio_led(const struct
>  {
>         int ret, state;
>
> -       led_dat->gpio = -1;
> +       if (!template->gpiod) {
> +               unsigned long flags = 0;
>
> -       /* skip leds that aren't available */
> -       if (!gpio_is_valid(template->gpio)) {
> -               dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
> -                               template->gpio, template->name);
> -               return 0;
> +               /* skip leds that aren't available */
> +               if (!gpio_is_valid(template->gpio)) {
> +                       dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
> +                                       template->gpio, template->name);
> +                       return 0;
> +               }
> +
> +               if (template->active_low)
> +                       flags |= GPIOF_ACTIVE_LOW;
> +
> +               ret = devm_gpio_request_one(parent, template->gpio, flags,
> +                                           template->name);
> +               if (ret < 0)
> +                       return ret;
> +
> +               led_dat->gpiod = gpio_to_desc(template->gpio);
> +               if (IS_ERR(led_dat->gpiod))
> +                       return PTR_ERR(led_dat->gpiod);
>         }

OK so this is the legacy codepath: point it out in a big fat
comment that this is the legacy codepath.

> Index: linux-pm/include/linux/leds.h
> ===================================================================
> --- linux-pm.orig/include/linux/leds.h
> +++ linux-pm/include/linux/leds.h
> @@ -251,6 +251,7 @@ struct gpio_led {
>         unsigned        retain_state_suspended : 1;
>         unsigned        default_state : 2;
>         /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
> +       struct gpio_desc *gpiod;

Put the new struct member right below the current "gpio"
member, and add comments saying that either needs to be
specified but "gpio" is deprecated for "gpiod".

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux