Re: [PATCH 12/13] leds: leds-gpio: Make use of device property API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday, October 07, 2014 02:18:45 AM Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> Make use of device property API in this driver so that both OF and ACPI
> based system can use the same driver.
> 
> This change contains material from Max Eliaser and Mika Westerberg.
> 
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Bryan, can you please tell me if you are OK with this patch?

You said you were for one of the previous versions if I remember correctly,
but it's changed quite a bit since then, so can you please check this new
version too?

> ---
>  drivers/leds/leds-gpio.c |   67 +++++++++++++++++++++--------------------------
>  1 file changed, 30 insertions(+), 37 deletions(-)
> 
> Index: linux-pm/drivers/leds/leds-gpio.c
> ===================================================================
> --- linux-pm.orig/drivers/leds/leds-gpio.c
> +++ linux-pm/drivers/leds/leds-gpio.c
> @@ -15,13 +15,11 @@
>  #include <linux/gpio.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/leds.h>
> -#include <linux/of.h>
> -#include <linux/of_platform.h>
> -#include <linux/of_gpio.h>
>  #include <linux/slab.h>
>  #include <linux/workqueue.h>
>  #include <linux/module.h>
>  #include <linux/err.h>
> +#include <linux/property.h>
>  
>  struct gpio_led_data {
>  	struct led_classdev cdev;
> @@ -171,40 +169,41 @@ static inline int sizeof_gpio_leds_priv(
>  		(sizeof(struct gpio_led_data) * num_leds);
>  }
>  
> -/* Code to create from OpenFirmware platform devices */
> -#ifdef CONFIG_OF_GPIO
> -static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
> +static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
>  {
> -	struct device_node *np = pdev->dev.of_node, *child;
> +	struct device *dev = &pdev->dev;
>  	struct gpio_leds_priv *priv;
>  	int count, ret;
> +	void *child;
>  
> -	/* count LEDs in this device, so we know how much to allocate */
> -	count = of_get_available_child_count(np);
> +	count = device_get_child_node_count(dev);
>  	if (!count)
>  		return ERR_PTR(-ENODEV);
>  
> -	for_each_available_child_of_node(np, child)
> -		if (of_get_gpio(child, 0) == -EPROBE_DEFER)
> -			return ERR_PTR(-EPROBE_DEFER);
> -
> -	priv = devm_kzalloc(&pdev->dev, sizeof_gpio_leds_priv(count),
> -			GFP_KERNEL);
> +	priv = devm_kzalloc(dev, sizeof_gpio_leds_priv(count), GFP_KERNEL);
>  	if (!priv)
>  		return ERR_PTR(-ENOMEM);
>  
> -	for_each_available_child_of_node(np, child) {
> +	device_for_each_child_node(dev, child) {
>  		struct gpio_led led = {};
> -		enum of_gpio_flags flags;
> -		const char *state;
> +		const char *state = NULL;
> +
> +		led.gpiod = devm_get_named_gpiod_from_child(dev, child,
> +							    "gpios", 0);
> +		if (IS_ERR(led.gpiod)) {
> +			device_put_child_node(dev, child);
> +			goto err;
> +		}
>  
> -		led.gpio = of_get_gpio_flags(child, 0, &flags);
> -		led.active_low = flags & OF_GPIO_ACTIVE_LOW;
> -		led.name = of_get_property(child, "label", NULL) ? : child->name;
> -		led.default_trigger =
> -			of_get_property(child, "linux,default-trigger", NULL);
> -		state = of_get_property(child, "default-state", NULL);
> -		if (state) {
> +		device_child_property_read_string(dev, child,
> +						  "label", &led.name);
> +		device_child_property_read_string(dev, child,
> +						  "linux,default-trigger",
> +						  &led.default_trigger);
> +
> +		if (!device_child_property_read_string(dev, child,
> +						       "linux,default_state",
> +						       &state)) {
>  			if (!strcmp(state, "keep"))
>  				led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
>  			else if (!strcmp(state, "on"))
> @@ -213,13 +212,14 @@ static struct gpio_leds_priv *gpio_leds_
>  				led.default_state = LEDS_GPIO_DEFSTATE_OFF;
>  		}
>  
> -		if (of_get_property(child, "retain-state-suspended", NULL))
> +		if (!device_get_child_property(dev, child,
> +					       "retain-state-suspended", NULL))
>  			led.retain_state_suspended = 1;
>  
>  		ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
> -				      &pdev->dev, NULL);
> +				      dev, NULL);
>  		if (ret < 0) {
> -			of_node_put(child);
> +			device_put_child_node(dev, child);
>  			goto err;
>  		}
>  	}
> @@ -238,13 +238,6 @@ static const struct of_device_id of_gpio
>  };
>  
>  MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
> -#else /* CONFIG_OF_GPIO */
> -static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
> -{
> -	return ERR_PTR(-ENODEV);
> -}
> -#endif /* CONFIG_OF_GPIO */
> -
>  
>  static int gpio_led_probe(struct platform_device *pdev)
>  {
> @@ -273,7 +266,7 @@ static int gpio_led_probe(struct platfor
>  			}
>  		}
>  	} else {
> -		priv = gpio_leds_create_of(pdev);
> +		priv = gpio_leds_create(pdev);
>  		if (IS_ERR(priv))
>  			return PTR_ERR(priv);
>  	}
> @@ -300,7 +293,7 @@ static struct platform_driver gpio_led_d
>  	.driver		= {
>  		.name	= "leds-gpio",
>  		.owner	= THIS_MODULE,
> -		.of_match_table = of_match_ptr(of_gpio_leds_match),
> +		.of_match_table = of_gpio_leds_match,
>  	},
>  };
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux