Move pci_configure_slot() and related functions from
drivers/pci/hotplug/pcihp_slot to drivers/pci/probe.c.
This is to prepare for doing device configuration during the normal
enumeration process instead of just after hot-add.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/hotplug/Makefile | 2
drivers/pci/hotplug/pcihp_slot.c | 176 --------------------------------------
drivers/pci/probe.c | 148 ++++++++++++++++++++++++++++++++
3 files changed, 149 insertions(+), 177 deletions(-)
delete mode 100644 drivers/pci/hotplug/pcihp_slot.c
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 3e6532b945c1..4a9aa08b08f1 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o
obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o
-pci_hotplug-objs := pci_hotplug_core.o pcihp_slot.o
+pci_hotplug-objs := pci_hotplug_core.o
ifdef CONFIG_HOTPLUG_PCI_CPCI
pci_hotplug-objs += cpci_hotplug_core.o \
diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c
deleted file mode 100644
index 3e36ec8d708a..000000000000
--- a/drivers/pci/hotplug/pcihp_slot.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman (greg@xxxxxxxxx)
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- * (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/export.h>
-#include <linux/pci_hotplug.h>
-
-static struct hpp_type0 pci_default_type0 = {
- .revision = 1,
- .cache_line_size = 8,
- .latency_timer = 0x40,
- .enable_serr = 0,
- .enable_perr = 0,
-};
-
-static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
-{
- u16 pci_cmd, pci_bctl;
-
- if (!hpp) {
- /*
- * Perhaps we *should* use default settings for PCIe, but
- * pciehp didn't, so we won't either.
- */
- if (pci_is_pcie(dev))
- return;
- hpp = &pci_default_type0;
- }
-
- if (hpp->revision > 1) {
- dev_warn(&dev->dev,
- "PCI settings rev %d not supported; using defaults\n",
- hpp->revision);
- hpp = &pci_default_type0;
- }
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
- pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
- if (hpp->enable_serr)
- pci_cmd |= PCI_COMMAND_SERR;
- else
- pci_cmd &= ~PCI_COMMAND_SERR;
- if (hpp->enable_perr)
- pci_cmd |= PCI_COMMAND_PARITY;
- else
- pci_cmd &= ~PCI_COMMAND_PARITY;
- pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
-
- /* Program bridge control value */
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
- hpp->latency_timer);
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
- if (hpp->enable_serr)
- pci_bctl |= PCI_BRIDGE_CTL_SERR;
- else
- pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
- if (hpp->enable_perr)
- pci_bctl |= PCI_BRIDGE_CTL_PARITY;
- else
- pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
- }
-}
-
-static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
-{
- if (hpp)
- dev_warn(&dev->dev, "PCI-X settings not supported\n");
-}
-
-static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
-{
- int pos;
- u32 reg32;
-
- if (!hpp)
- return;
-
- if (hpp->revision > 1) {
- dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
- hpp->revision);
- return;
- }
-
- /* Initialize Device Control Register */
- pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
- ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
-
- /* Initialize Link Control Register */
- if (dev->subordinate)
- pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
- ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
-
- /* Find Advanced Error Reporting Enhanced Capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (!pos)
- return;
-
- /* Initialize Uncorrectable Error Mask Register */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32);
- reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
-
- /* Initialize Uncorrectable Error Severity Register */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32);
- reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
-
- /* Initialize Correctable Error Mask Register */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32);
- reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
-
- /* Initialize Advanced Error Capabilities and Control Register */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
- reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
-
- /*
- * FIXME: The following two registers are not supported yet.
- *
- * o Secondary Uncorrectable Error Severity Register
- * o Secondary Uncorrectable Error Mask Register
- */
-}
-
-void pci_configure_slot(struct pci_dev *dev)
-{
- struct pci_dev *cdev;
- struct hotplug_params hpp;
-
- if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
- (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
- (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
- return;
-
- pcie_bus_configure_settings(dev->bus);
-
- memset(&hpp, 0, sizeof(hpp));
- pci_get_hp_params(dev, &hpp);
-
- program_hpp_type2(dev, hpp.t2);
- program_hpp_type1(dev, hpp.t1);
- program_hpp_type0(dev, hpp.t0);
-
- if (dev->subordinate) {
- list_for_each_entry(cdev, &dev->subordinate->devices,
- bus_list)
- pci_configure_slot(cdev);
- }
-}
-EXPORT_SYMBOL_GPL(pci_configure_slot);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2e6292..5d0cc646817a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,6 +6,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
@@ -1236,6 +1237,153 @@ int pci_setup_device(struct pci_dev *dev)
return 0;
}
+static struct hpp_type0 pci_default_type0 = {
+ .revision = 1,
+ .cache_line_size = 8,
+ .latency_timer = 0x40,
+ .enable_serr = 0,
+ .enable_perr = 0,
+};
+
+static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
+{
+ u16 pci_cmd, pci_bctl;
+
+ if (!hpp) {
+ /*
+ * Perhaps we *should* use default settings for PCIe, but
+ * pciehp didn't, so we won't either.
+ */
+ if (pci_is_pcie(dev))
+ return;
+ hpp = &pci_default_type0;
+ }
+
+ if (hpp->revision > 1) {
+ dev_warn(&dev->dev,
+ "PCI settings rev %d not supported; using defaults\n",
+ hpp->revision);
+ hpp = &pci_default_type0;
+ }
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
+ pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+ if (hpp->enable_serr)
+ pci_cmd |= PCI_COMMAND_SERR;
+ else
+ pci_cmd &= ~PCI_COMMAND_SERR;
+ if (hpp->enable_perr)
+ pci_cmd |= PCI_COMMAND_PARITY;
+ else
+ pci_cmd &= ~PCI_COMMAND_PARITY;
+ pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+ /* Program bridge control value */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+ hpp->latency_timer);
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+ if (hpp->enable_serr)
+ pci_bctl |= PCI_BRIDGE_CTL_SERR;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+ if (hpp->enable_perr)
+ pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+ else
+ pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+ }
+}
+
+static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
+{
+ if (hpp)
+ dev_warn(&dev->dev, "PCI-X settings not supported\n");
+}
+
+static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
+{
+ int pos;
+ u32 reg32;
+
+ if (!hpp)
+ return;
+
+ if (hpp->revision > 1) {
+ dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
+ hpp->revision);
+ return;
+ }
+
+ /* Initialize Device Control Register */
+ pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
+ ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
+
+ /* Initialize Link Control Register */
+ if (dev->subordinate)
+ pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
+ ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
+
+ /* Find Advanced Error Reporting Enhanced Capability */
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+ if (!pos)
+ return;
+
+ /* Initialize Uncorrectable Error Mask Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32);
+ reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
+
+ /* Initialize Uncorrectable Error Severity Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32);
+ reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
+
+ /* Initialize Correctable Error Mask Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32);
+ reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
+
+ /* Initialize Advanced Error Capabilities and Control Register */
+ pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32);
+ reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
+ pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+ /*
+ * FIXME: The following two registers are not supported yet.
+ *
+ * o Secondary Uncorrectable Error Severity Register
+ * o Secondary Uncorrectable Error Mask Register
+ */
+}
+
+void pci_configure_slot(struct pci_dev *dev)
+{
+ struct pci_dev *cdev;
+ struct hotplug_params hpp;
+
+ if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+ (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+ return;
+
+ pcie_bus_configure_settings(dev->bus);
+
+ memset(&hpp, 0, sizeof(hpp));
+ pci_get_hp_params(dev, &hpp);
+
+ program_hpp_type2(dev, hpp.t2);
+ program_hpp_type1(dev, hpp.t1);
+ program_hpp_type0(dev, hpp.t0);
+
+ if (dev->subordinate) {
+ list_for_each_entry(cdev, &dev->subordinate->devices,
+ bus_list)
+ pci_configure_slot(cdev);
+ }
+}
+EXPORT_SYMBOL_GPL(pci_configure_slot);
static void pci_release_capabilities(struct pci_dev *dev)
{
pci_vpd_release(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
