Hello Amit, On Thu, May 08, 2014 at 08:07:59PM +0530, Amit Daniel Kachhap wrote: > This is required as with addition of cpufreq cooling notifiers > mechanism the client can enable some more cooling states at a later > point of time. Say when minimum p state is reached then ACPI specific > throttling is enabled which may add some more cooling states. > > Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx> > --- > drivers/thermal/step_wise.c | 2 +- > drivers/thermal/thermal_core.c | 9 +++------ > include/linux/thermal.h | 1 + > 3 files changed, 5 insertions(+), 7 deletions(-) > > diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c > index f251521..7d65617 100644 > --- a/drivers/thermal/step_wise.c > +++ b/drivers/thermal/step_wise.c > @@ -72,7 +72,7 @@ static unsigned long get_target_state(struct thermal_instance *instance, > } > break; > case THERMAL_TREND_RAISE_FULL: > - if (throttle) > + if (instance->upper != THERMAL_CSTATE_MAX && throttle) > next_target = instance->upper; > break; > case THERMAL_TREND_DROPPING: > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index 71b0ec0..36bb107 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -921,7 +921,6 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, > struct thermal_instance *pos; > struct thermal_zone_device *pos1; > struct thermal_cooling_device *pos2; > - unsigned long max_state; > int result; > > if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE)) > @@ -939,13 +938,11 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, > if (tz != pos1 || cdev != pos2) > return -EINVAL; > > - cdev->ops->get_max_state(cdev, &max_state); > - I am not sure I follow why we need to release this check. Can't the user use the notifier infrastructure and change the max state? I think I need a better view of use cases where max state would change. > - /* lower default 0, upper default max_state */ > + /* lower default 0, upper default THERMAL_CSTATE_MAX */ > lower = lower == THERMAL_NO_LIMIT ? 0 : lower; > - upper = upper == THERMAL_NO_LIMIT ? max_state : upper; > + upper = upper == THERMAL_NO_LIMIT ? THERMAL_CSTATE_MAX : upper; > > - if (lower > upper || upper > max_state) > + if (lower > upper) > return -EINVAL; > > dev = > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index f7e11c7..3748e6d 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -36,6 +36,7 @@ > > /* invalid cooling state */ > #define THERMAL_CSTATE_INVALID -1UL > +#define THERMAL_CSTATE_MAX 1UL > > /* No upper/lower limit requirement */ > #define THERMAL_NO_LIMIT THERMAL_CSTATE_INVALID > -- > 1.7.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
