On Monday 05 May 2014 16:35:46 Hanjun Guo wrote:
> On 2014-4-29 18:01, Arnd Bergmann wrote:
> [...]
> >>> For raw_pci_{read,write} we can have a trivial generic implementation in
> >>> the PCI core, like
> >>>
> >>> int __weak raw_pci_read(unsigned int domain, unsigned int bus,
> >>> unsigned int devfn, int reg, int len, u32 *val)
> >>> {
> >>> struct pci_bus *bus = pci_find_bus(domain, bus);
> >>> if (!bus)
> >>> return -ENODEV;
> >>>
> >>> return bus->ops->read(bus, devfn, reg, len, val);
> >>> }
> >>>
> >>> which won't work on x86 or ia64, but should be fine everywhere else. Alternatively,
> >>> you can change the ACPI code to do the above manually and call the architecture
> >>> independent interfaces, either bus->ops->read, or pci_bus_read_config_{byte,word,dword},
> >>> which would actually simplify the ACPI code.
> >>
> >> This may not work. ACPI needs to be able to access PCI config space before
> >> we've done a PCI bus scan and created pci_bus structures, so the pointer
> >> of bus will be NULL.
> >
> > Hmm, this is a serious issue, and I don't have a good idea for how
> > to solve it yet, we need to discuss it some more I think.
> >
> > We are currently working on generic PCI support for ARM64 with DT, which
> > will be based around the concept that all PCI host drivers can be loadable
> > modules, and each host driver would supply its own config space access
> > method.
>
> this will be the problem, ACPI may access config space before modules are
> loaded.
I've given it some more thought independently. In the end, I think it's
not a big issue because the standard PCI driver for ACPI will be rather
trivial and we can always have that built-in.
It destroys my dream of making the PCI core itself a loadable module,
but I wasn't sure if that was realistic anyway, and we may still be able
to do that for non-ACPI configurations.
> > With ACPI, we probably don't need the flexibility, because hopefully all
> > PCI host bridges will be SBSA compliant and have a regular ECAM config
> > space implementation (as opposed to the proprietary methods used by
> > e.g. APM X-Gene, Samsung GH7 or everything we have on ARM32).
> >
> > If we can rely on always having ECAM support available, it would be
> > easy enough to add an implementation of that specifically for ACPI,
> > outside of the architecture code or the PCI core, or we could have
> > a global implementation of that, which gets used by both ACPI and
> > the compliant PCI host bridge drivers and can be built-in even for
> > loadable host drivers.
> >
> > Alternatively, you could try to see if it's possible to defer the PCI
> > access to the time the host driver is loaded. Do you know what the access
> > to config space is actually needed for?
>
> There is a statement in ACPI 5.0a spec:
> OSPM must guarantee that the following operation regions must always be
> accessible (which means even before the driver is ready):
> PCI_Config operation regions on a PCI root bus containing a _BBN object.
> (invoke _BBN method will return PCI bus number)
Hmm, the next statement there is
* I/O operation regions.
That one is even harder to make available in general, in particular
because SBSA says it doesn't have to be provided at all.
> And raw_pci_{read,write} will be called in ACPICA to access the PCI_Config
> to get some information, so theoretic any device defined in DSDT with
> PCI_Config operation region which be enumerated before PCI host bridge will
> access config space before the PCI bus scan.
Just to confirm: Are they called before pci_acpi_scan_root()?
In the same section you quote, it seems not:
It should be noted that PCI Config Space Operation Regions are ready as
soon the host controller or bridge controller has been programmed with a
bus number. PCI1’s _REG method would not be run until the PCI-PCI bridge
has been properly configured.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
