AER uses a separate trace interface by now. To make it consistent, move it into unified RAS trace interface. Signed-off-by: Chen, Gong <gong.chen@xxxxxxxxxxxxxxx> --- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 +- drivers/ras/Kconfig | 2 +- include/ras/ras_event.h | 64 ++++++++++++++++++++++++++++ include/trace/events/ras.h | 77 ---------------------------------- 4 files changed, 66 insertions(+), 81 deletions(-) delete mode 100644 include/trace/events/ras.h diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 34ff702..73e73b7 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -22,9 +22,7 @@ #include <linux/cper.h> #include "aerdrv.h" - -#define CREATE_TRACE_POINTS -#include <trace/events/ras.h> +#include <ras/ras_event.h> #define AER_AGENT_RECEIVER 0 #define AER_AGENT_REQUESTER 1 diff --git a/drivers/ras/Kconfig b/drivers/ras/Kconfig index 64f09641..75845b9 100644 --- a/drivers/ras/Kconfig +++ b/drivers/ras/Kconfig @@ -1,4 +1,4 @@ # RAS_TRACE always gets selected by whoever wants it. config RAS_TRACE def_bool y - depends on EDAC_MM_EDAC || ACPI_EXTLOG + depends on EDAC_MM_EDAC || ACPI_EXTLOG || PCIEAER diff --git a/include/ras/ras_event.h b/include/ras/ras_event.h index dfda854..375d318 100644 --- a/include/ras/ras_event.h +++ b/include/ras/ras_event.h @@ -9,6 +9,7 @@ #include <linux/edac.h> #include <linux/ktime.h> #include <linux/cper.h> +#include <linux/aer.h> /* * MCE Extended Error Log trace event @@ -154,6 +155,69 @@ TRACE_EVENT(mc_event, __get_str(driver_detail)) ); +/* + * PCIe AER Trace event + * + * These events are generated when hardware detects a corrected or + * uncorrected event on a PCIe device. The event report has + * the following structure: + * + * char * dev_name - The name of the slot where the device resides + * ([domain:]bus:device.function). + * u32 status - Either the correctable or uncorrectable register + * indicating what error or errors have been seen + * u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED + */ + +#define aer_correctable_errors \ + {BIT(0), "Receiver Error"}, \ + {BIT(6), "Bad TLP"}, \ + {BIT(7), "Bad DLLP"}, \ + {BIT(8), "RELAY_NUM Rollover"}, \ + {BIT(12), "Replay Timer Timeout"}, \ + {BIT(13), "Advisory Non-Fatal"} + +#define aer_uncorrectable_errors \ + {BIT(4), "Data Link Protocol"}, \ + {BIT(12), "Poisoned TLP"}, \ + {BIT(13), "Flow Control Protocol"}, \ + {BIT(14), "Completion Timeout"}, \ + {BIT(15), "Completer Abort"}, \ + {BIT(16), "Unexpected Completion"}, \ + {BIT(17), "Receiver Overflow"}, \ + {BIT(18), "Malformed TLP"}, \ + {BIT(19), "ECRC"}, \ + {BIT(20), "Unsupported Request"} + +TRACE_EVENT(aer_event, + TP_PROTO(const char *dev_name, + const u32 status, + const u8 severity), + + TP_ARGS(dev_name, status, severity), + + TP_STRUCT__entry( + __string( dev_name, dev_name ) + __field( u32, status ) + __field( u8, severity ) + ), + + TP_fast_assign( + __assign_str(dev_name, dev_name); + __entry->status = status; + __entry->severity = severity; + ), + + TP_printk("%s PCIe Bus Error: severity=%s, %s\n", + __get_str(dev_name), + __entry->severity == AER_CORRECTABLE ? "Corrected" : + __entry->severity == AER_FATAL ? + "Fatal" : "Uncorrected, non-fatal", + __entry->severity == AER_CORRECTABLE ? + __print_flags(__entry->status, "|", aer_correctable_errors) : + __print_flags(__entry->status, "|", aer_uncorrectable_errors)) +); + #endif /* _TRACE_HW_EVENT_MC_H */ /* This part must be outside protection */ diff --git a/include/trace/events/ras.h b/include/trace/events/ras.h deleted file mode 100644 index 1c875ad..0000000 --- a/include/trace/events/ras.h +++ /dev/null @@ -1,77 +0,0 @@ -#undef TRACE_SYSTEM -#define TRACE_SYSTEM ras - -#if !defined(_TRACE_AER_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_AER_H - -#include <linux/tracepoint.h> -#include <linux/aer.h> - - -/* - * PCIe AER Trace event - * - * These events are generated when hardware detects a corrected or - * uncorrected event on a PCIe device. The event report has - * the following structure: - * - * char * dev_name - The name of the slot where the device resides - * ([domain:]bus:device.function). - * u32 status - Either the correctable or uncorrectable register - * indicating what error or errors have been seen - * u8 severity - error severity 0:NONFATAL 1:FATAL 2:CORRECTED - */ - -#define aer_correctable_errors \ - {BIT(0), "Receiver Error"}, \ - {BIT(6), "Bad TLP"}, \ - {BIT(7), "Bad DLLP"}, \ - {BIT(8), "RELAY_NUM Rollover"}, \ - {BIT(12), "Replay Timer Timeout"}, \ - {BIT(13), "Advisory Non-Fatal"} - -#define aer_uncorrectable_errors \ - {BIT(4), "Data Link Protocol"}, \ - {BIT(12), "Poisoned TLP"}, \ - {BIT(13), "Flow Control Protocol"}, \ - {BIT(14), "Completion Timeout"}, \ - {BIT(15), "Completer Abort"}, \ - {BIT(16), "Unexpected Completion"}, \ - {BIT(17), "Receiver Overflow"}, \ - {BIT(18), "Malformed TLP"}, \ - {BIT(19), "ECRC"}, \ - {BIT(20), "Unsupported Request"} - -TRACE_EVENT(aer_event, - TP_PROTO(const char *dev_name, - const u32 status, - const u8 severity), - - TP_ARGS(dev_name, status, severity), - - TP_STRUCT__entry( - __string( dev_name, dev_name ) - __field( u32, status ) - __field( u8, severity ) - ), - - TP_fast_assign( - __assign_str(dev_name, dev_name); - __entry->status = status; - __entry->severity = severity; - ), - - TP_printk("%s PCIe Bus Error: severity=%s, %s\n", - __get_str(dev_name), - __entry->severity == AER_CORRECTABLE ? "Corrected" : - __entry->severity == AER_FATAL ? - "Fatal" : "Uncorrected, non-fatal", - __entry->severity == AER_CORRECTABLE ? - __print_flags(__entry->status, "|", aer_correctable_errors) : - __print_flags(__entry->status, "|", aer_uncorrectable_errors)) -); - -#endif /* _TRACE_AER_H */ - -/* This part must be outside protection */ -#include <trace/define_trace.h> -- 1.9.0 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html