Re: [PATCH] drm/i915/opregion: work around buggy firmware that provides 8+ output devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/12/2014 06:31 PM, Chris Wilson wrote:
> On Wed, Feb 12, 2014 at 11:05:40AM +0800, Aaron Lu wrote:
>> The ACPI table on ASUS UX302LA has more than 8 output devices under the
>> graphics controller device node. The problem is, the real active output
>> device, the LCD panel, is listed the last. The result is, the LCD's
>> device id doesn't get recorded in the active device list CADL array and
>> when the _DCS control method for the LCD device is executed, it returns
>> 0x1d, meaning it is not active. This affects the hotkey delivery ASL
>> code that will not deliver a notification if the output device is not
>> active on backlight hotkey press.
>>
>> I don't see a clean way to solve this problem since the operation region
>> spec doesn't allow more than 8 output devices so we have no way of
>> storing all these output devices. The fact that output devices that have
>> _BCM control method usually means they have a higher possibility of being
>> used than those who don't made me choose a simple way to work around
>> the buggy firmware by replacing the last entry in CADL array with the one
>> that has _BCM control method. There is no specific reason why the last
>> entry is picked instead of others.
> 
> Another possibility is that the connector list is in rough priority
> order so might be useful for sorting the CADL array.
> 
> Since the CADL should only be a list of currently active devices, we
> could just bite the bullet and repopulate it correctly after every
> setcrtc.

Thanks for the suggestion. As a first step, does the following un-tested
patch look OK?

diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index acde2945eb8a..afdd7d84fb32 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -220,11 +220,11 @@ struct opregion_asle {
 #define SWSCI_SBCB_POST_VBE_PM		SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
 #define SWSCI_SBCB_ENABLE_DISABLE_AUDIO	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
 
-#define ACPI_OTHER_OUTPUT (0<<8)
-#define ACPI_VGA_OUTPUT (1<<8)
-#define ACPI_TV_OUTPUT (2<<8)
-#define ACPI_DIGITAL_OUTPUT (3<<8)
-#define ACPI_LVDS_OUTPUT (4<<8)
+#define ACPI_OTHER_OUTPUT 0
+#define ACPI_VGA_OUTPUT 1
+#define ACPI_TV_OUTPUT 2
+#define ACPI_DIGITAL_OUTPUT 3
+#define ACPI_LVDS_OUTPUT 4
 
 #define MAX_DSLP	1500
 
@@ -616,6 +616,7 @@ static void intel_didl_outputs(struct drm_device *dev)
 	acpi_status status;
 	u32 temp;
 	int i = 0;
+	int index[5] = {0};
 
 	handle = ACPI_HANDLE(&dev->pdev->dev);
 	if (!handle || acpi_bus_get_device(handle, &acpi_dev))
@@ -693,8 +694,8 @@ blind_set:
 			break;
 		}
 		temp = ioread32(&opregion->acpi->didl[i]);
-		iowrite32(temp | (1<<31) | output_type | i,
-			  &opregion->acpi->didl[i]);
+		iowrite32(temp | (1<<31) | (output_type << 8) |
+			  index[output_type]++, &opregion->acpi->didl[i]);
 		i++;
 	}
 	goto end;
@@ -705,18 +706,44 @@ static void intel_setup_cadls(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_opregion *opregion = &dev_priv->opregion;
 	int i = 0;
+	int index[5] = {0};
 	u32 disp_id;
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		int output_type = ACPI_OTHER_OUTPUT;
 
-	/* Initialize the CADL field by duplicating the DIDL values.
-	 * Technically, this is not always correct as display outputs may exist,
-	 * but not active. This initialization is necessary for some Clevo
-	 * laptops that check this field before processing the brightness and
-	 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
-	 * there are less than eight devices. */
-	do {
-		disp_id = ioread32(&opregion->acpi->didl[i]);
+		switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_VGA:
+		case DRM_MODE_CONNECTOR_DVIA:
+			output_type = ACPI_VGA_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+		case DRM_MODE_CONNECTOR_9PinDIN:
+			output_type = ACPI_TV_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_DVII:
+		case DRM_MODE_CONNECTOR_DVID:
+		case DRM_MODE_CONNECTOR_DisplayPort:
+		case DRM_MODE_CONNECTOR_HDMIA:
+		case DRM_MODE_CONNECTOR_HDMIB:
+			output_type = ACPI_DIGITAL_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_eDP:
+		case DRM_MODE_CONNECTOR_LVDS:
+			output_type = ACPI_LVDS_OUTPUT;
+			break;
+		}
+		disp_id = (opregion->acpi->didl[0] & (1 << 31)) |
+			  (output_type << 8) | index[output_type]++;
 		iowrite32(disp_id, &opregion->acpi->cadl[i]);
-	} while (++i < 8 && disp_id != 0);
+		i++;
+	}
+
+	if (i < 8)
+		iowrite32(0, &opregion->acpi->cadl[i]);
 }
 
 void intel_opregion_init(struct drm_device *dev)


Thanks,
Aaron
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux